• Steel and Composite Structures
• /
• 제33권1호
• /
• pp.123-131
• /
• 2019

The present investigation is concerned with two dimensional deformation in a homogeneous nonlocal thermoelastic solid with two temperature. The nonlocal thermoelastic solid is subjected to inclined load. Laplace and Fourier transforms are used to solve the problem. The bounding surface is subjected to concentrated and distributed sources. The analytical expressions of displacement, stress components, temperature change are obtained in the transformed domain. Numerical inversion technique has been applied to obtain the results in the physical domain. Numerical simulated results are depicted graphically to show the effect of angle of inclination and nonlocal parameter on the components of displacements, stresses and conductive temperature. Some special cases are also deduced from the present investigation.

• Structural Engineering and Mechanics
• /
• 제69권6호
• /
• pp.607-614
• /
• 2019

The present investigation has focus on the study of deformation due to thermomechanical sources in a thick circular plate. The thick circular plate is homogeneous, transversely isotropic with two temperatures and without energy dissipation. The upper and lower surfaces of the thick circular plate are traction free. The Laplace and Hankel transform has been used for finding the general solution to the field equations. The analytical expressions of stresses, conductive temperature and displacement components are computed in the transformed domain. However, the resulting quantities are obtained in the physical domain by using numerical inversion technique. Numerically simulated results are illustrated graphically. The effects of two temperatures by considering different values of temperature parameters are shown on the various components. Some particular cases are also figured out from the present investigation.

• Geomechanics and Engineering
• /
• 제18권2호
• /
• pp.153-159
• /
• 2019

This paper examines the results from three-dimensional dynamic finite element analysis undertaken to develop a new dynamically installed anchor (DIA). Several candidate shapes of new DIAs were selected after an investigation into previous researches of existing DIA designs. The performances of selected DIAs during the installation and loading in non-homogeneous clay were investigated through large deformation finite element (LDFE) analyses. Findings were compared to the current anchors in operation (i.e., Torpedo and Omni-Max DIA) to assess the viability of the new designs in the field. Overall, the anchor embedment depths of the novel DIAs lied under the results of OMNI-Max DIA. And also, the tracked anchor trajectory confirmed that, the novel DIAs dove deeper with stiffer travelling angle, compared to the OMNI-Max DIA. These elements are more critical and beneficial especially in a field where the achieved embedment depths are generally low.

• 대한금속재료학회지
• /
• 제46권11호
• /
• pp.701-707
• /
• 2008

This study examined the creation mechanism of free volume during homogeneous deformation induced by the elastostatic compression at room temperature. Experiments demonstrated that amorphous alloys subjected to the elastostatic compression underwent structural disordering, during which densely packed polyhedra breakdown to form new, loosely packed ones, resulting in the creation of excess free volume. A combination of experiments and molecular dynamics simulations are used to explore fundamental issues on how free volume is created during elastostatic compression.

• Advances in materials Research
• /
• 제11권1호
• /
• pp.23-39
• /
• 2022

This work deals with the two-dimensional deformation in a homogeneous isotropic nonlocal magneto-thermoelastic solid with two temperatures under the effects of inclined load at different inclinations. The mathematical model has been formulated by subjecting the bounding surface to a concentrated load. The Laplace and Fourier transform techniques have been used for obtaining the solution to the problem in transformed domain. The expressions for nonlocal thermal stresses, displacements and temperature are obtained in the physical domain using a numerical inversion technique. The effects of nonlocal parameter, rotation and inclined load in the physical domain are depicted and illustrated graphically. The results obtained in this paper can be useful for the people who are working in the field of nonlocal thermoelasticity, nonlocal material science, physicists and new material designers. It is found that there is a significant difference due to presence and absence of nonlocal parameter.

• Structural Engineering and Mechanics
• /
• 제88권6호
• /
• pp.551-567
• /
• 2023

In this work, the free vibration analysis of functionally graded material (FGM) sandwich plates with porosity is conducted using the p-version of the finite element method (FEM), which is based on the first-order shear deformation theory (FSDT). The sandwich plate consists of two face-sheet layers of FGM and a homogeneous core layer. The obtained results are validated using convergence and comparison studies with previously published results. Five porosities distribution models of FGM sandwich plates are assumed and analyzed. The effect of the thickness ratio, boundary conditions, volume fraction exponents, and porosity coefficients of the top and bottom layers of FGM sandwich plates on the natural frequency are addressed.

• Computers and Concrete
• /
• 제26권3호
• /
• pp.213-226
• /
• 2020

The present study covenants with the static and free vibration behavior of nanocomposite sandwich plates reinforced by carbon nanotubes resting on Pasternak elastic foundation. Uniformly distributed (UD-CNT) and functionally graded (FG-CNT) distributions of aligned carbon nanotube are considered for two types of sandwich plates such as, the face sheet reinforced and homogeneous core and the homogeneous face sheet and reinforced core. Based on the first shear deformation theory (FSDT), the Hamilton's principle is employed to derive the mathematical models. The obtained solutions are numerically validated by comparison with some available cases in the literature. The elastic foundation model is assumed as one parameter Winkler - Pasternak foundation. A parametric study is conducted to study the effects of aspect ratios, foundation parameters, carbon nanotube volume fraction, types of reinforcement, core-to-face sheet thickness ratio and types of loads acting on the bending and free vibration analyses. It is explicitly shown that the (FG-CNT) face sheet reinforced sandwich plate has a high resistance against deflections compared to other types of reinforcement. It is also revealed that the reduction in the dimensionless natural frequency is most pronounced in core reinforced sandwich plate.

• 터널과지하공간
• /
• 제14권5호
• /
• pp.345-352
• /
• 2004

숏크리트 지보 구조는 지반과 숏크리트가 일체화되어 숏크리트 라이닝에 전단력의 전달이 가능한 터널구조로서 안정한 구조물을 형성하는데 기여한다. 본 연구에서는 석고를 사용하여 일정한 강도를 가진 균질한 모형지반을 제작하였다. 하중재하에 의해 일정한 원지반 응력을 조성한 후 상$.$하부반단면 굴착공법으로 굴착하며 굴착시 터널 주변지반의 응력상태와 라이닝의 거동특성을 계측하였다. 측정결과 굴착으로 인하여 터널 주변지반과 라이닝에 접선방향으로 인장응력이 발생되었다. 단계굴착에 의한 응력 해방율은 상부 경계선 확대천공시 9%, 상부반단면 아치부 확대천공시 15%, 상부반단면 경계선 절단 즉시 48%, 안정화 후 하부반단면 굴착전 94%로 나타났다.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2004년도 제5회 압연심포지엄 신 시장 개척을 위한 압연기술
• /
• pp.63-71
• /
• 2004

Recently, a sheet forming process of Mg alloys is highlighted again due to increasing demand for Mg wrought alloys in the applications of casings of mobile electronics and outer-skins of light-weight transportation. Microstructure control is essential for the enhancement of workability and formability of Mg alloy sheets. In this research, AZ31 Mg alloy sheets were prepared by hot rolling process and the rolling condition dependency of the microstructure and texture evolution was studied by employing a conventional rolling mill as well as an asymmetric rolling mill. When rolled through multiple passes with a small reduction per pass, fine-grained and homogeneous microstructure evolved by repetitive dynamic and static recrystallization. With higher rolling temperature, dynamic recrystallization was initiated in lower reduction. However with increasing reduction per pass, deformation was locallized in band-like regions, which provided favorable nucleation sites f3r dynamic recrystallization. Through post annealing process, the microstructures could be transformed to more equiaxed and homogeneous grain structures. Textures of the rolled sheets were characterized by $\{0002\}$ basal plane textures and retained even after post annealing. On the other hand, asymmetrically rolled and subsequently annealed sheets exhibited unique annealing texture, where $\{0002\}$ orientation was rotated to some extent to the rolling direction and its intensity was reduced.

• 한국산학기술학회논문지
• /
• 제12권7호
• /
• pp.2939-2944
• /
• 2011

용융탄산염형 연료전지 시스템의 성능 향상을 위해 핵심 부분인 스택을 수치적으로 모사할 필요성이 대두되고 있다. 스택은 다양한 재질, 즉 금속, 세라믹, 폴리머 등으로 이루어져 있고 또한 단위전지 수백 장이 적층되어 제작되기 때문에 이를 전부 세세히 모델링하여 고려하는 것은 거의 불가능하다. 이에 따라 스택 전체를 하나의 균질한 물질로 대체할 수 있는 균질 물성치 도출이 요구되고 있다. 본 논문에서는 단위전지 압축률을 도입하고 모든 압축 변형이 분리판과 매트릭스에서만 일어난다는 등의 몇 가지 기본 가정 하에서 스택의 두 가지 영역, 즉 활성 영역과 매니폴드 영역에서 각각 균질 물성치를 추정하였다. 추정된 물성치를 실제 문제에 적용하여 성공적인 결과를 얻을 수 있었다.