• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.40 no.11
• /
• pp.2121-2130
• /
• 2015

In this paper, we analyze LM-MIMO (load-modulation multiple-input multiple-output) system with single RF chain. And then, we confirm that load modulation technique can support generation of high-order m-PSK modulation and m-QAM modulation in LM-MIMO system. Finally we evaluate performance of LM-MIMO system with load modulation. Conventional MIMO system requires a number of RF chains for expansion of MIMO dimension. A number of RF chains can cause various problems. On the other hand, although LM-MIMO system is expanded, LM-MIMO system requires single RF chain only. Therefore, LM-MIMO system has low-complexity and low power consumption. As results, we can confirm that load modulation of T-model can modulate high-order m-PSK and m-QAM singal. Also, we can confirm that $4{\times}4$ LM-MIMO system using load modulation has a similar performance to conventional $4{\times}4$ MIMO system.

• Journal of Power Electronics
• /
• v.19 no.6
• /
• pp.1515-1526
• /
• 2019

Ear-piercing high-frequency noise from electromagnetic vibrations in motors has become unacceptable in sensitive environments, due to the application of pulse width modulation (PWM) and in consideration of switching losses. This paper proposed a synchronous periodic frequency modulation (SPFM) method based on the interleaving technique for paralleled three-phase voltage source inverters (VSIs) to eliminate PWM vibration noise. The proposed SPFM technique is able to effectively remove unpleasant high-frequency vibration noise as well as acoustic noise more effectively than the conventional periodic carrier frequency modulation (PCFM) and interleaving technique. It completely eliminates the vibration noise near odd-order carrier frequencies and reduces the PWM vibration noise near even-order carrier frequencies depending on the switching frequency variation range. Furthermore, the SPFM method is simple to implement and does not employ additional circuits in the drive system. Finally, the effectiveness of the proposed method has been confirmed by detailed experimental results.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.6A
• /
• pp.607-613
• /
• 2008

In this paper, we investigate the performance of SMP-assisted 3GPP GERAN evolution system employing high order modulation and turbo coding. When applying the SMP which maps systematic bits into highly reliable bit positions, it is confirmed that there is the performance gain for the modulation and coding schemes of 16QAM(DAS-8) as well as 32QAM(DAS-11) by link level simulation.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.41 no.12
• /
• pp.1736-1738
• /
• 2016

In modern digital communication systems adapting high-order modulation and high performance channel code, log-likelihood ratios involving the repeated calculations of the logarithm of sum of exponential functions are necessary for demodulation and decoding. In this paper, the approximation methods called Min and MinC are applied to demodulation and decoding together and their complexity and joint performance are analyzed.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.8
• /
• pp.21-27
• /
• 2013

In this paper, we propose a low-complexity Turbo coded BICM-ID (bit-interleaved coded modulation with iterative decoding) system. A Turbo code is a powerful error correcting code with a BER (bit error rate) performance very close to the Shannon limit. In order to increase spectral efficiency of the Turbo code, a coded modulation combining Turbo code with high order modulation is used. The BER performance of Turbo-BICM can be improved by Turbo-BICM-ID using iterative demodulation and decoding algorithm. However, compared with Turbo-BICM, the decoding complexity of Turbo-BICM-ID is increased by exchanging information between decoder and demodulator. To reduce the decoding complexity of Turbo-BICM-ID, we propose a low-complexity Turbo-BICM-ID system. When compared with conventional Turbo-BICM-ID, the proposed scheme not only show similar BER performance but also reduce the decoding complexity.

• Journal of Power Electronics
• /
• v.16 no.2
• /
• pp.480-489
• /
• 2016

A novel hybrid carrier-based pulse width modulation (CBPWM) scheme that combines unipolar and dipolar modulations is proposed for single-phase three-level rectifiers, which are widely applied in railway traction drive systems. The proposed CBPWM method can satisfy the volt-second balancing principle in the complete modulation index region through overmodulation compensation. The modulation scheme features two modulation modes: unipolar and dipolar. The operation range limits of these modulation modes can be modified by changing the separation coefficient. In comparison with the traditional unipolar CBPWM, the proposed hybrid CBPWM scheme can provide advantageous features, such as lower high-order harmonic distortion of the line current and better utilization of switching frequency. The separation coefficient value is optimized to achieve the maximum utilization of these advantages. The experimental results verify the feasibility and effectiveness of the proposed hybrid CBPWM scheme.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.15 no.7
• /
• pp.2356-2376
• /
• 2021

In this paper, we proposed a novel modulation recognition method based on quantum elephant herding algorithm (QEHA) evolving neural network under impulse noise environment. We use the adaptive weight myriad filter to preprocess the received digital modulation signals which passing through the impulsive noise channel, and then the instantaneous characteristics and high order cumulant features of digital modulation signals are extracted as classification feature set, finally, the BP neural network (BPNN) model as a classifier for automatic digital modulation recognition. Besides, based on the elephant herding optimization (EHO) algorithm and quantum computing mechanism, we design a quantum elephant herding algorithm (QEHA) to optimize the initial thresholds and weights of the BPNN, which solves the problem that traditional BPNN is easy into local minimum values and poor robustness. The experimental results prove that the adaptive weight myriad filter we used can remove the impulsive noise effectively, and the proposed QEHA-BPNN classifier has better recognition performance than other conventional pattern recognition classifiers. Compared with other global optimization algorithms, the QEHA designed in this paper has a faster convergence speed and higher convergence accuracy. Furthermore, the effect of symbol shape has been considered, which can satisfy the need for engineering.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.12C
• /
• pp.1135-1141
• /
• 2007

In this paper, an adaptive bit-reliability mapping is proposed for the bit-level Chase combining in LDPC-coded high-order modulation systems. Contrary to the previously known bit-reliability mapping that assigns the information (or parity) bits to more (or less) reliable bit positions, the proposed mapping adaptively assigns codeword bits to the bit positions of various reliabilities by considering the characteristics of code and protection levels of bits in high-order modulation symbol. Compared with the symbol-level Chase combining and the constellation rearrangement bit mapping, the proposed mapping gives $0.7{\sim}1.3$ dB and $0.1{\sim}1.0$ dB performance gain at $FER=10^{-3}$ with no additional complexity, respectively. Adaptive bit-reliability mappings are derived for various environments and the validity of them is confirmed through simulation.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.9
• /
• pp.2131-2139
• /
• 2014

In this paper, a binary-coded physical-layer network coding (PNC) is considered when high-order modulation techniques are used at source nodes in wireless communication environments. In the conventional PNC schemes, tight power control and phase compensation are required at a relay node. However, they may not be feasible in practical wireless communication environments. Thus, we do not assume the pre-equalization in this paper, and we only utilize the channel state information at receiver (CSIR). We propose a signal detection method for the binary-coded PNC with high-order modulation, such as QPSK and 16QAM, at the source nodes, while the conventional scheme only consider the BPSK at source nodes. We also analyze the bit-error performance of the proposed technique in both uncoded and coded cases.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.29 no.3
• /
• pp.69-80
• /
• 2015

This paper is writing about developing magnet power supply. It is very important for power supply to obtain output current in high precision and high stability. As a switching noise and a power noise are the cause of disrupting the stability of output current, to remove these at the front end, low pass filter with 300Hz cutoff frequency is designed and placed. And also to minimize switching noise of the current into magnet and to stop abrupt fluctuations, output filter should be designed, when doing this, we design it by considering load has high value inductance. As power supply demands the stability of less than 5ppm, high precision 24bit(300nV/bit) analog digital converter is needed. As resolving power of 24bit(300nV/bit) analog digital converter is high, it is also very important to design the input stage of analog digital converter. To remove input noise, 4th order low pass filter is composed. Due to the limitation of clock, to minimize quantization error between 15bit DPWM and output of ADC having 24bit resolving power, ${\Sigma}-{\Delta}$ modulation is used and bit contracted DPWM is constituted. And before implementing, to maximize efficiency, simulink is used.