• International Journal of Industrial Entomology and Biomaterials
• /
• 제6권1호
• /
• pp.57-61
• /
• 2003

A new silkworm variety, Chugangjam, with a sex-limited larval marking and high silk yielding for summer-autumn rearing season is $F_1$ hybrid between Jam 147, a Japanese race bred from P8503/8453, and Jam 148, a Chinese race from M8306/Jam 130. Jam 147, Japanese parent of the Chugangjam showed a high GCA (general combining ability) in pupation percentage and Jam 148, Chinese parent, showed a high GCA in pupation percentage and single cocoon weight. In the local adaptability test performed at 8 local areas in autumn of 2001, Chugangjam was 5% higher in cocoon yield and 8% in raw silk productivity in the 10,000 of the 3rd molted larvae, respectively, than the check variety Daesungjam.

• Structural Engineering and Mechanics
• /
• 제58권4호
• /
• pp.661-676
• /
• 2016

This paper presents an elastic/plastic model that neglects strain hardening during loading, but accounts for the Bauschinger effect. These mathematical features of the model represent reasonably well the actual behavior of several materials such as high strength steels. Previous attempts to describe the behavior of this kind of materials have been restricted to a class of boundary value problems in which the state of stress in the plastic region is completely controlled by the yield stress in tension or torsion. In particular, the yield stress is supposed to be constant during loading and the forward plastic strain reduces the yield stress to be used to describe reversed yielding. The new model generalizes this approach on plane stress problems assuming that the material obeys the von Mises yield criterion during loading. Then, the model is adopted to describe reversed yielding in thin hollow discs subject to external pressure.

• Structural Engineering and Mechanics
• /
• 제28권3호
• /
• pp.295-316
• /
• 2008

In the present paper a mechanical model to predict the compressive response of high strength short concrete columns with square cross-section confined by transverse steel is presented. The model allows one to estimate the equivalent confinement pressures exercised by transverse steel during the loading process taking into account of the interaction of the stirrups with the inner core both in the plane of the stirrups and in the space between two successive stirrups. The lateral pressure distributions at hoop levels are obtained by using a simple model of elastic beam on elastic medium simulating the interaction between stirrups and concrete core, including yielding of steel stirrups and damage of concrete core by means of the variation in the elastic modulus and in the Poisson's coefficient. Complete stress-strain curves in compression of confined concrete core are obtained considering the variation of the axial forces in the leg of the stirrup during the loading process. The model was compared with some others presented in the literature and it was validated on the basis of the existing experimental data. Finally, it was shown that the model allows one to include the main parameters governing the confinement problems of high strength concrete members such as: - the strength of plain concrete and its brittleness; - the diameter, the pitch and the yielding stress of the stirrups; - the diameter and the yielding stress of longitudinal bars; - the side of the member, etc.

• 한국육종학회지
• /
• 제42권3호
• /
• pp.207-211
• /
• 2010

'Taedong Valley' is a high yielding and processing potato cultivar, which is a clonal selection resulting from a cross between 'W870' and 'A88431-1'. It is a medium maturating cultivar with medium plant height and light green foliage. 'Taedong Valley' has profuse flowering habit and light purple flowers. Tubers are smooth, round, and with yellow skin, light yellow flesh, medium eye depth. Tubers have medium dormancy and good keeping quality. 'Taedong Valley' has stable yield under wide range of climatic conditions. It is resistant to common scab and potato virus Y, but moderately susceptible to late blight. It is also resistant to most of the disorders, particularly dehiscence, hollow heart and internal brown spots. This cultivar has high level of tuber uniformity and capable of yielding 43.6 t/ha which is about 9.0% higher than the control potato cultivar 'Atlantic' under optimum agronomical practices.

• 한국잠사곤충학회지
• /
• 제22권1호
• /
• pp.26-45
• /
• 1980

가잠의 견사물질 생성능력에 대한 견사선의 특이성을 구명코저 견사생산성이 다른 8개 원종과 그 F$_1$교잡종에 대하여 견사선의 성장 및 조직학적 특성, 후부견, 사선의 RNA 및 DNA합성과 그 아미노산조성 등을 조사한 결과 다음과 같을 결론을 얻었다. 1) 견사생성량이 다론 가잠품종간 F$_1$ 교배조를 만들 경우 다사량 품종은 5령유충기의 잠체중대 견사선중비 및 견사선중대 견사생성량비가 다사량 품종에 비하여 증가되었다. 2) 후부견사선의 조직학적 관찰에서 견사물질합성이 활발히 전개될 때는 세포핵의 크기 및 분지가 증대하고 5령 96시간째 세포핵의 형태에 있어서 견사생성량이 가장 적은 품종인 $N_2$ 및 $C_{60}$의 세포핵은 잠107, 잠108 등의 것에 비하여 크기가 작고 단순한 형태를 취하였다. 3) 가잠 후부견사선의 RNA함유율은 다사량계 품종이 소사량계 품종에 비하여 높았고 잠품종간 F$_1$ 교배조를 만들 경우 견사생성량과 RNA 함유율은 정상관으로 비례하였다. 4) 가잠 5령유충기중 5령 3일을 전후(2일~4일) 한 후부견사선의 RNA 및 DNA 생성량의 증가율은 다사량계품종이 소사량계에 비하여 약 30%정도 높았다. 5) 가잠 5령유충기(2~4일)의 후부견사선에 있어서 DNA에 의한 RNA 생성효율은 다사량계가 소사량 계품종에 비하여 높았다. 6) 다사량계 잠품종의 후부견사선 DNA 생성량은 5령 4일째 374$\mu\textrm{g}$/두인데 비하여 소사량계품종은 199$\mu\textrm{g}$로서 약 53%정도이었다. 7) 가잠 후부견사선의 아미노산 조성에 있어서 함유량이 가장 높은 것은 Alanine 34.8%이며 Glycine 22.8%, Serine 9.1%, Tyrosine 7.3%의 순으로서 견사 fibroin의 아미노산조성과는 달리 Glycine 함량이 Alanine에 비하여 적었다. 8) 가잠 원종과 교잡종의 후부견사선 아미노산 조성에 있어서 Valine, Isoleucine, Leucine, Phenylalanine, Lysine, Histidine 및 Arginine등 잠체성장에 대한 영양성 아미노산은 원종에 비교적 많이 함유되었고 Glycine Serine, Aspartic acid, Glutamic acid등 비영양성 아미노산과 Threonine은 F$_1$ 교잡종에 비교적 많이 함유되었다. 9) 견사 생성량이 다른 가잠 품종간의 F$_1$ 교배조에 있어서 후부견사선의 아미노산조성중 G.A.S.(Glycine+Alanine+Serine)함량은 다사량 품종일수록 증가되었다.

• 한국재료학회지
• /
• 제30권6호
• /
• pp.315-320
• /
• 2020

This study deals with the yielding behavior and strain aging properties of three bake hardening steels with dual-phase microstructure, fabricated by varying the annealing temperature. Bake hardening and aging tests are performed to examine the correlation of martensite volume fraction with yielding behavior and strain aging properties of the bake hardening steels with dual-phase microstructure. The volume fraction of martensite increases with increasing annealing temperature. Room-temperature tensile test results show that the yielding behavior changes from discontinuous-type to continuous-type with increasing volume fraction of martensite due to higher mobile dislocation density. According to the bake hardening and aging tests, the specimen with the highest fraction of martensite exhibited high bake hardening with low aging index because solute carbon atoms in ferrite and martensite effectively diffuse to dislocations during the bake hardening test, while in the aging test they diffuse at only ferrite due to lower aging temperature.

• 대한수의학회지
• /
• 제44권2호
• /
• pp.293-301
• /
• 2004

We investigated the effect of reproductive herd health program (RHHP) on the reproductive performance in high yielding dairy herds. Data collected from 205 lactations at Boeun County, Chungbuk from April 2001 to Dec. 2003 included postpartum reproductive and metabolic diseases, body condition score (BCS), reproductive performance and milking records. First we compared the reproductive performance of cows without RHHP (pre-RHHP group) and cows with RHHP (RHHP group). Intervals from calving to first service (99.6 vs. 81.8 days) and to conception (160.3 vs. 131.8 days) were shorter in the RHHP group than in the pre-RHHP group. Secondly, we determined the effect of milk yield (305 days) on the occurrence of postpartum diseases, BCS changes, and reproductive performance in cows under RHHP. The occurrence of metritis and metabolic diseases were greater in the over-10,000 kg group than in the under-10,000 kg group. The over-10,000 kg group lost more body condition than the under-10,000 kg group from calving to month 3 postpartum. Nevertheless, reproductive performance did not differ between the two groups. These results indicate that reproductive performance can be improved by the application of RHHP in high yielding dairy herds and that reproductive performance in the cows under RHHP are not affected by high milk yielding.

• 한국잠사곤충학회지
• /
• 제41권3호
• /
• pp.154-166
• /
• 1999

General characteristics and life span of silkworm moth were investigated amongst 277 gene resources preserved and maintained in Korea. Silkworm varieties were classified according to the commercial characteristics and the viability of tested varieties. There were significant differences among the eight different commercial characteristics of silkworm such as whole larval period, duration of 5th instar, pupal body weight, single cocoon weight, cocoon shell weight, cocoon shell ratio, cocoon yield and longevity, Tropical race showed the longest life span among the other five geographical races, and followed by Japanese, European, Chinese and Korean race in order. In the longevity of each variety, Daizo(sdi) showed the shortest life span with 4.3days, and J037 was the longest as 16.0 days. Average longevity of female was 11.1 days as showed 3.0 days longer than that of male which was 8.2 days. Total average longevity of the whole varieties was 9.7days. In the correlation between the longevity and commercial characteristics, there was a tendency that the commercial characteristics became better when the life span was longer. According to the result of Complete Linkage Cluster Analysis, the genetic resources of 277 silkworm varieties classified into 5 groups such as “Group I”for short life span with low cocoon yielding “Group II”for middle life span with middle cocoon yielding,“Group III”for the shortest life span with low cocoon yielding, “Group IV”for high pupation rate and the highest cocoon yielding with comparatively long life span, and “Group V”for the longest life span with comparatively high cocoon yielding.

• 한국식품조리과학회지
• /
• 제27권6호
• /
• pp.745-754
• /
• 2011

To improve the textural properties of gluten free rice flour based products, the physicochemical and pasting properties of extruded non-waxy rice flours using extruder were investigated. The high yielding Tongil type rice variety, Hanarum was used. Hanarum rice flour was prepared by dry milling from soaked and dried rice grain. The operation conditions of twin screw extruder were 250 rpm of screw speed, $160^{\circ}C$ of barrel temperature, and 24, 27, and 30% of moisture content. Hanarum extruded rice flour (HERF) were lower in crude lipid and ash contents, but higher in crude protein than Hanarum rice flour (HRF). The color values of HERF showed significantly different (p<0.05) with different moisture contents. Water binding capacities, apparent amylose contents, and damaged starch of HERF were higher than those of HRF. Moisture contents affected water binding capacities of HERF. Solubility increased with increasing heating temperature and solubilities of HERF differed significantly (p<0.05). X-ray crystallinity was changed after extrusion cooking and that of HERF showed sharp peaks at $2{\theta}=18-20^{\circ}$. The pasting viscosities of HERF kept lower values (~ 10 RVU) constantly.

• 한국지역사회생활과학회지
• /
• 제24권2호
• /
• pp.221-231
• /
• 2013

This study was carried out to investigate the quality characteristics of Jeung-pyun using high yielding type rice (Dasan, Keunseom) and processing type rice (Daerip, Seolgang, Yangjo) for applying a new processes in rice food industry. The weight, volume, specific volume and expansion of Jeung-pyun were the highest in Dasan. The shapes of cross section showed that the air cell of Jeung-pyun made from Dasan and Daerip were smaller and more regular than Keunseom, Seolgang, and Yangjo. The Jeung-pyun of Daerip was the highest in L value, springiness, cohesiveness and chewiness, Keunseom was the highest in a value and hardness; Yangjo was the highest in b value, adhesiveness and gumminess. Jeung-pyun of Dasan was shown, through sensory evaluation, to be the highest in flavor, appearance and overall preference. The Jeung-pyun of Daerip was the highest in color and taste preference, while Seolgang was the highest in texture preference.