1 |
Ahmad, S.M. and Shah, S.P. (1982), "Stress-strain curves of concrete confined by spiral reinforcement", ACI Struct. J., 79(6), 484-490
|
2 |
Braga, F., Gigliotti, R. and Laterza, M. (2006), "Analytical stress-strain relationship for concrete confiend by steel stirrusp and/or FRP jackets", J. Struct. Eng., ASCE, 132(9), 1402-1419
DOI
ScienceOn
|
3 |
Chen, W.F. and Sohal, I. (1995), "Plastic design and second-order analysis of steel frames", Book published by Springer-Verlag, New York, 509 pp
|
4 |
Cusson, D. and Paultre, P. (1994), "High-strength concrete columns confined by rectangular ties", J. Struct. Eng., ASCE, 120(3), 783-804
DOI
ScienceOn
|
5 |
Cusson, D. and Paultre, P. (1995), "Stress-strain model for confined high strength concrete", J. Struct. Eng., ASCE, 121(3), 468-477
DOI
ScienceOn
|
6 |
Cusson, D. and Paultre, P. (1995), "Stress-strain model for confined high-strength concrete", J. Struct. Eng., ASCE, 121(3), 468-477
DOI
ScienceOn
|
7 |
Fafitis, A. and Shah, S.P. (1985), "Lateral reinforcement for high-strength concrete columns", ACI Spec. Publ. SP 87-12, American Concrete Institute (ACI), 213-232
|
8 |
La Mendola, L. and Papia, M. (2002), "General stress-strain model for concrete or masonry response under uniaxial cyclic compression", Struct. Eng. Mech., 14(4), 435-454
DOI
ScienceOn
|
9 |
Lima Junior, H.C. and Giongo, J.S. (2004), "Steel-fibre high-strength concrete prisms confined by rectangular ties under concentric compression", Mater. Stuct., 37, 689-697
DOI
|
10 |
Liu, J. and Foster, S.J. (2000), "Strength of tied high-strength concrete columns loaded in concentric compression", ACI Stuct. J., 97(1), 149-156
|
11 |
Mander, J.B., Priestley, M.J.N. and Park, R. (1988), "Observed stress-strain behavior of confined concrete", J. Struct. Eng., ASCE, 114(8), 1827-1849
DOI
ScienceOn
|
12 |
Mander, J.B., Priestley, M.J.N. and Park, R. (1988), "Theoretical stress-strain model for confined concrete", J. Struct. Eng., ASCE, 114(8), 1804-1826
DOI
ScienceOn
|
13 |
Teerawong, J., Lukkunaprasit, P. and Senjuntichai, T. (2004), "Strength enhancement in confined concrete with consideration of flexural flexibilities of ties", Struct. Eng. Mech., 18(2), 151-166
DOI
ScienceOn
|
14 |
Sargin, M. (1971), "Stress-strain relationship for concrete and the analysis of structural concrete sections", Solid Mechanics Division, University of Waterloo, Ontario
|
15 |
Sheikh, S. and Uzumeri, S.M. (1982), "Analytical model for concrete confinement in tied columns", J. Struct. Eng., ASCE, 108(12), 2703-2722
|
16 |
Tan, T.H. and Yip, W.K. (1999), "Behaviour of axially loaded concrete columns confined by elliptical hoops", ACI Struct. J., 96(6), 967-971
|
17 |
Mau, S.T., Elwi Alaa, E. and Zhou Si-Zhu. (1988), "Analytical study of spacing of lateral steel and column confinement", J. Struct. Eng., ASCE, 124(3), 262-269
DOI
ScienceOn
|
18 |
Park, R., Priestley, M.J.N. and Gill, W.D. (1982), "Ductility of square-confined concrete columns", Proceedings, ASCE, 108(4), 929-950
|
19 |
Popovics, S. (1973), "A numerical approach to the complete stress-strain curve of concrete", Cement Concrete Res., 3(5), 583-599
DOI
ScienceOn
|
20 |
Razvi, R. and Saatcioglu, M. (1999), "Circular high-strength concrete columns under concentric compression", ACI Struct. J., 96(5), 817-825
|
21 |
Richart, F.E., Brandtzaeg, A. and Brown, R.L. (1929), "The failure of plain and spiral reinforced concrete in compression", Engineering Experiment Station; Bulletin N.190, University of Illinois, Urbana, USA
|
22 |
Elwi, A.A. and Murray, D.W. (1979), "A 3D hypoelastic concrete constitutive relationship", J. Eng. Mech., ASCE, 105, 623-641
|
23 |
Foster, S.J., Liu, J. and Sheikh, S.A. (1998), "Cover spalling in HSC columns loaded in concentric compression", J. Struct. Eng., ASCE, 124(12), 1431-1437
DOI
|
24 |
Hong, K., Han, S.H. and Yi, S.T. (2006), "High-strength columns confined by low-volumetric-ratio lateral ties", Eng. Struct., 28, 1346-1353
DOI
ScienceOn
|
25 |
Razvi, S. and Saatcioglu, M. (1999), "Confinement model for high-strength concrete", J. Struct. Eng., ASCE, 125(3), 281-288
DOI
ScienceOn
|