• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2005년도 추계 학술대회논문집
• /
• pp.131-134
• /
• 2005

Conventional high order interpolation schemes are limitative in several aspects mainly because they need data of neighboring cells at the reconstruction step. However, discontinuous Galerkin method and spectral volume method, two high order flux schemes which will be analyzed and compared in this paper, have an important benefit that they are not necessary to determine the flow gradients from data of neighboring cells or elements. These two schemes construct polynomial of variables within a cell so that even near wall or discontinuity, the high order does not deteriorate.

• KIEE International Transactions on Electrophysics and Applications
• /
• 제4C권1호
• /
• pp.15-20
• /
• 2004

This paper discusses electrical insulation characteristics at cryogenic temperature, especially focusing on partial discharge (PD) inception characteristics, for high temperature superconducting cables. In liquid nitrogen (L$N_2$) / polypropylene (PP) laminated paper composite insulation system, PD inception strength (PDIE) was evaluated in terms of volume effect and V-t characteristics. Different kinds of butt gap condition were applied in the experiments, using parallel plane and coaxial cylindrical cable samples. Experimental results revealed that the volume effect on PDIE could be evaluated by the statistical stressed liquid volume (SSLV) taking account the discharge probability not only in the butt gap but also in the other thin layers between PP laminated papers. Furthermore, the indices n of V-t characteristics at PD inception were estimated to be 80∼110, irrespective of the butt gap condition.

• 생물환경조절학회지
• /
• 제27권1호
• /
• pp.1-6
• /
• 2018

수경재배에서는 근권내 양분의 집적 정도는 급액의 양과 밀접한 관계를 가지기 때문에 급액의 양(횟수)이 토마토의 생육과 수량에 미치는 영향이 크다. 따라서 본 시험에서는 코이어를 이용한 토마토 장기 수경재배에 급액량이 근권의 무기이온에 미치는 영향을 구명하고자 하였다. 적산일사량을 기준으로 급액량을 조절하였으며 생육시기별로 적산일사량 설정치를 변경하며 급액량을 4수준으로 처리하였다. 처리별 매일의 급액량과 배액량을 조사하였고 배액율을 계산하였다. 급액량이 많을수록 토마토의 수분 흡수량은 증가하는 경향이었다. 그러나 High 처리구는 2월과 3월에 Medium high 처리구에 비하여 수분 흡수가 감소하였다. 월별 평균 급액량과 배액율을 계산하여 배액율이 20-30%되는 급액 구간으로 1월은 $120-140J/cm^2$, 2월은 $100-120J/cm^2$, 3월은 $80-100J/cm^2$, 4월은 $70-90J/cm^2$, 5월은 $60-75J/cm^2$로 적정한 범위를 정할 수 있었다. 급액량이 많을수록 이온들의 농도가 낮아서 근권의 양분집적을 상당 부분 방지할 수 있었는데 양분을 흡착하는 코이어 배지의 특성 때문에 배액율이 20-30%인 경우 근권의 무기이온의 농도는 상당히 높았다. 그런데 P와 K는 처리에 관계없이 배액에서 급액농도 보다 낮아지는 경우가 발생하였으며, 급액량이 많은 처리에서도 Mg와 S가 가장 잘 집적되는 이온이었다. 일사량이 적은 시기에는 급액량에 따른 배액내 무기이온의 농도는 큰 차이를 나타내지 않았으나, 일사량이 많은 시기에는 급액량이 적을수록 배액의 무기이온의 농도가 높았다. 특히, 3월 이후에는 급액량 조정만으로는 배액의 이온농도 상승을 방지하기 어려워 우선적으로 급액 EC를 낮춰 근권에 양분이 집적되는 것을 막을 필요가 있었다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제27권7호
• /
• pp.889-898
• /
• 2003

The soot yield is studied by a premixed propane-oxygen-inert gas combustion in a specially designed disk-type constant-volume combustion chamber to investigate the effect of turbulence on soot formation. Premixtures are simultaneously ignited by eight spark plugs located on the circumference of chamber at 45 degree intervals in order to observe the soot formation under high pressures and high temperatures. The eight flames converged compress the end gases to a high pressure. The laser schlieren and direct flame photographs for observation field with 10 mm in diameter are taken to examine into the behaviors of flame front and gas flow in laminar and turbulent combustion. The soot volume fraction in the chamber center during the final stage of combustion at the highest pressure is measured by the in situ laser extinction technique and simultaneously the corresponding burnt gas temperature by the two-color pyrometry method. It is found that the soot yield of turbulent combustion decreases in comparison with that of laminar combustion because the burnt gas temperature increases with the drop of heat loss.

• 전기전자학회논문지
• /
• 제22권3호
• /
• pp.759-766
• /
• 2018

This paper presents a high-speed axial-flux machine which utilizes the idea of sinusoidal shaped pole combined with a consequent iron-pole. The target of the proposed machine is the cost reduction of the relatively expensive Samarium-Cobalt (SmCo) permanent magnet (PM) material and the torque per PM volume improvement by using sinusoidal consequent-pole rotor. The effectiveness of the proposed machine is validated by comparing it with conventional consequent-pole and with conventional PM machines using 3-D finite element method (FEM) simulations. The comparison and analysis is done in terms of back electro-motive force (back-EMF) harmonic contents, torque per PM volume and torque ripple characteristics. The simulation results show that the proposed machine is suitable and cost-effective for high-speed and high torque per PM volume applications. Furthermore, due to the consequent pole, the magnetic flux saturation and the overload current torque-capability are also presented and discussed in the paper.

• 한국물환경학회지
• /
• 제20권6호
• /
• pp.641-646
• /
• 2004

Vehicle emissions from highway landuse include different pollutants such as heavy metals, oil and grease and particulates from fuels, brake pad wear and tire wear. Since highways are impervious and have high pollutant mass emissions from vehicular activity, it is considered as stormwater intensive landuses. Therefore this research was performed to understand the magnitude of first flush and to suggest the criteria of first flush for storm runoff management in highways. The fractions of washed-off mass are very high in first 30% of runoff volume, which suggests a definition of first flush. The washed-off mass stabilizes after 30% of the runoff volume and it is apparent that treatment capacity in the early part of a storm is more valuable than treatment capacity in the later part of the storm. Using the criteria of "high" first flush and "medium" first flush, as 50% of the mass in the first 30% of the volume, and 30 to 50% in the first 30% volume, respectively, more than 30% of the storms showed high first flush. A "first flush friendly" best management practice(BMP), meaning a BMP that can treat a high percentage or all of the initial flow, would be advantageous up to 80% of the events.

• 한국멀티미디어학회논문지
• /
• 제18권2호
• /
• pp.158-167
• /
• 2015

This study presents a new method to improve the speed of high quality volume rendering. We improve the speed of ambient occlusion which is one of the global illumination techniques used in traditional volume visualization. Calculating ambient occlusion takes much time because it determines an illumination value of a sample by integrating opacities of nearby samples. This study proposes an improved method for this by using local statistics such as averages and standard deviations. We calculate local statistics for each volume block, a set of nearby samples, in pre-processing time. In the rendering process, we efficiently determine the illumination value by assuming the density distribution as a normal distribution. As the results, we can generate high quality images that combine ambient occlusion illumination with local illumination in real time.

• Structural Engineering and Mechanics
• /
• 제65권2호
• /
• pp.163-171
• /
• 2018

Plain concrete is a brittle material with a very low tensile strength compared to compressive strength and critical tensile strain. This study analyzed the dynamic characteristics of high-performance fiber-reinforced cementitious composites based on slurry-infiltrated fiber concrete (SIFCON-based HPFRCC), which maximizes the steel-fiber volume fraction and uses high-strength mortar to increase resistance to loads, such as explosion and impact, with a very short acting time. For major experimental variables, three levels of fiber aspect ratio and five levels of fiber volume fraction between 6.0% and 8.0% were considered, and the flexural strength and toughness characteristics were analyzed according to these variables. Furthermore, three levels of the aspect ratio of used steel fibers were considered. The highest flexural strength of 65.0 MPa was shown at the fiber aspect ratio of 80 and the fiber volume fraction of 7.0%, and the flexural strength and toughness increased proportionally to the fiber volume fraction. The test results according to fiber aspect ratio and fiber volume fraction revealed that after the initial crack, the load of the SIFCON-based HPFRCC continuously increased because of the high fiber volume fraction. In addition, sufficient residual strength was achieved after the maximum strength; this achievement will bring about positive effects on the brittle fracture of structures when an unexpected load, such as explosion or impact, is applied.

• 한국측량학회지
• /
• 제35권4호
• /
• pp.261-268
• /
• 2017

The topographic volume estimation is carried out for the earth work of a construction site and quarry excavation monitoring. The topographic surveying using instruments such as engineering levels, total stations, and GNSS (Global Navigation Satellite Systems) receivers have traditionally been used and the photogrammetric approach using drone systems has recently been introduced. However, these methods cannot be adopted for inaccessible areas where high resolution satellite images can be an alternative. We carried out experiments using Kompsat-3/3A data to estimate topographic volume for a quarry and checked the accuracy. We generated DEMs (Digital Elevation Model) using newly acquired Kompsat-3/3A data and checked the accuracy of the topographic volume estimation by comparing them to a reference DEM generated by timely operating a drone system. The experimental results showed that geometric differences between stereo images significantly lower the quality of the volume estimation. The tested Kompsat-3 data showed one meter level of elevation accuracy with the volume estimation error less than 1% while the tested Kompsat-3A data showed lower results because of the large geometric difference.

• 대한인간공학회지
• /
• 제23권2호
• /
• pp.93-104
• /
• 2004

The research subjects of this study were 30 unmarried Korean women from 20 to 29 who had never had an operation on their breast. Measurement method using plaster breast mold was used for measuring their volume of breast. The correlation between their breast volume and the methods to set up brassiere cups with the existing method and with their circumference of breast was analyzed using KendalI's Coefficient. which was to figure out a method which had a bigger correlation with the volume of breast between the method to set up brassiere cups using the existing method and the method using the circumference of breast. The results analyzed showed that the coefficient of correlation between the existing method and the volume of breast was .12 and the significance level was .45. They didn't have any correlation. On the other hand. the coefficient of correlation between the circumference of breast and the volume of breast was .82. which was very high values and the significance level was very high .0001. Therefore. it turned out that it was difficult to set up brassiere cups by using the existing method and it was easier and more reliable to set up the cups by using the circumference of breast.