References
- L. Gu, W. Wang, B. Fahimi and M. Kiani, "A Novel High Energy Density Double Salient Exterior Rotor Permanent Magnet Machine," in IEEE Transactions on Magnetics, vol.51, no.3, pp. 1-4, 2015. DOI:10.1109/TMAG.2014.2366081
- C. Hwang, S. Hung, C. Liu and S. Cheng, "Optimal Design of a High Speed SPM Motor for Machine Tool Applications," in IEEE Transactions on Magnetics, vol.50, no.1, pp. 1-4, 2014. DOI:10.1109/TMAG.2013.2276092
- J. Rao, L. Zhang and G. Zhou, "Rotor design and optimizations for interior permanent magnet machines in motorized spindle application," 20th International Conference on Electrical Machines and Systems (ICEMS), Sydney, NSW, pp. 1-5, 2017. DOI:10.1109/ICEMS.2017.8056347
- W. Wang, H. Hofmann, and C. E. Bakis, "Ultrahigh Speed Permanent Magnet Motor/ Generator for Aerospace Flywheel Energy Storage Applications," IEEE Int. Conf. Electr. Mach. Drives, pp. 1494-1500, 2005. DOI:10.1109/IEMDC.2005.195918
- C. Zwyssig, J. W. Kolar, and S. D. Round, "Megaspeed Drive Systems: Pushing Beyond 1 Million r/min," IEEE/ASME Trans. Mechatronics, vol.14, no.5, pp. 564,574, 2009. DOI:10.1109/TMECH.2008.2009310
- A. Tuysuz, C. Zwyssig, and J. W. Kolar, "A Novel Motor Topology for High-Speed Micro-Machining Applications," IEEE Transactions on Industrial Electronics, vol.61, no.6, pp. 2960-2968, 2014. DOI:10.1109/TIE.2013.2273481
- D. Krahenbuhl, C. Zwyssig, H. Weser, and J. W. Kolar, "A Miniature 500 000-r/min Electrically Driven Turbocompressor," IEEE Transactions on Industry Applications, vol.46, no.6, pp. 2459-2466, 2010. DOI:10.1109/TIA.2010.2073673
- M. A. Awadallah and B. Venkatesh, "Energy Storage in Flywheels: An Overview," Canadian Journal of Electrical and Computer Engineering, vol.38, no.2, pp. 183-193, 2015. DOI:10.1109/CJECE.2015.2420995
- R. Hebner, J. Beno and A. Walls, "Flywheel batteries come around again," IEEE Spectrum, vol.39, no.4, pp. 46-51, 2002. DOI:10.1109/6.993788
- A. Hussain, S. Atiq and B. I. Kwon, "Consequent-Pole Hybrid Brushless Wound-Rotor Synchronous Machine," in IEEE Transactions on Magnetics, 2018. DOI:10.1109/TMAG.2018.2837690
- I. Boldea, L. N. Tutelea, L. Parsa, and D. Dorrell, "Automotive electric propulsion systems with reduced or no permanent magnets: An overview," IEEE Transactions on Industrial Electronics, vol.61, no.10, pp. 5696-5711, 2014. DOI:10.1109/TIE.2014.2301754
- Y. Gao, R. Qu, D. Li, J. Li and G. Zhou, "Consequent-Pole Flux-Reversal Permanent Magnet Machine for Electric Vehicle Propulsion," in IEEE Transactions on Applied Superconductivity, vol.26, no.4, pp. 1-5, 2016. DOI:10.1109/TASC.2016.2514345
- Yolacan and M. Aydin, "Rotor Design Optimization of a New Flux-Assisted Consequent Pole Spoke-Type Permanent Magnet Torque Motor for Low-Speed Applications," in IEEE Transactions on Magnetics, 2018. DOI:10.1109/TMAG.2018.2832076
- N. Baloch, B. I. Kwon and Y. Gao, "Low-Cost High-Torque-Density Dual-Stator Consequent-Pole Permanent Magnet Vernier Machine," in IEEE Transactions on Magnetics, 2018. DOI:10.1109/TMAG.2018.2849082
- C. Shi, D. Li, R. Qu, H. Zhang, Y. Gao and Y. Huo, "A Novel Linear Permanent Magnet Vernier Machine With Consequent-Pole Permanent Magnets and Halbach Permanent Magnet Arrays," in IEEE Transactions on Magnetics, vol.53, no.11, pp. 1-4, 2017. DOI:10.1109/TMAG.2017.2696559
- T. D. Nguyen, K. J. Tseng, S. Zhang and H. T. Nguyen, "A Novel Axial Flux Permanent-Magnet Machine for Flywheel Energy Storage System: Design and Analysis," IEEE Transactions on Industrial Electronics, vol.58, no.9, pp. 3784-3794, 2011. DOI:10.1109/TIE.2010.2089939
- T. D. Nguyen, G. Foo, K. J. Tseng and D. M. Vilathgamuwa, "Modeling and Sensorless Direct Torque and Flux Control of a Dual-Airgap Axial Flux Permanent Magnet Machine With Field-Weakening Operation," IEEE/ASME Transactions on Mechatronics, vol.19, no.2, pp. 412-422, 2014. DOI:10.1109/TMECH.2013.2242481
- T. D. Nguyen, K. J. Tseng, S. Zhang and H. T. Nguyen, "On the modeling and control of a novel flywheel energy storage system," 2010 IEEE International Symposium on Industrial Electronics, pp. 1395-1401, 2010. DOI:10.1109/ISIE.2010.5637797
- S. Kumar, W. Zhao, Z. Du, T. A. Lipo, and B. I. Kwon, "Design of Ultra-high Speed Axial Flux Permanent Magnet Machine with Sinusoidal Back-EMF for Energy Storage Application," IEEE Transactions on Magnetics, vol.51, no.11, pp. 1-4, 2015. DOI:10.1109/TMAG.2015.2451162
- S. Kumar, T. A. Lipo and B. I. Kwon, "A 32,000 r/min Axial Flux Permanent Magnet Machine for Energy Storage With Mechanical Stress Analysis," IEEE Transactions on Magnetics, vol.52, no.7, pp. 1-4, 2016. DOI:10.1109/TMAG.2015.2512939