• The Journal of Korea Robotics Society
• /
• v.16 no.3
• /
• pp.199-206
• /
• 2021

The robot is an effective means to perform repetitive tasks quickly and accurately. It could be more effective in dangerous environments where human is difficult to access. The construction site is a dangerous environment with a high possibility of industrial accidents where heavy work is frequently carried out at a high place. In particular, an accident in the construction site is highly likely to lead to a severe disaster. Of course, various technologies are being developed to monitor the safety of workers in construction sites and prevent accidents, but there is a limit to eliminate the risk of accidents. Therefore, it is necessary to make efforts to replace workers exposed to dangerous environments with equipment or robots that could be controlled remotely in a more active way. In this study, Remote Precise Installation System was proposed to replace the workers exposed to the risk of accident at a high place during the bridge construction. Also, the conceptual design and analytical reviews of this system were carried out. Suppose Remote Precise Installation System is developed according to the derived concept and the target performance. In that case, this system is expected to be applied as a technology that can effectively replace the workers at the bridge construction site.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2019.05a
• /
• pp.205-207
• /
• 2019

Special training soldier for thermal equipment during army heavy equipment maintenance education is small training equipment and many trainees have few opportunities for practical training, and there is a high risk of safety accidents during maintenance training. Because practical training is limited and repeated practice is difficult, a training system is needed. In this study, we propose a virtual training system that can reduce the training cost beyond the time and space, enable realistic experiential training, reflect the standard maintenance manual, and train teamwork. The virtual training system using the virtual augmented reality is a system that can reduce the cost beyond the space and time and can be practically practiced. The first-person virtual training system using HMD, which is the three-dimensional display system proposed in this study, is suitable for army thermal equipment maintenance education system. The proposed system is expected to be useful for maintenance training of other equipments and other groups because it has good scalability.

• Journal of Convergence for Information Technology
• /
• v.11 no.7
• /
• pp.278-287
• /
• 2021

This study was conducted to analyze with a focus on gender whether the prevalence of hyperuricemia varies depending on sitting time and high-risk drinking by occupational group. For this study, the Korea National Health and Nutrition Examination Survey data were used, and 16,366 people were selected. The chi-square independence test and logistic regression model were used as the analysis method. The prevalence and risk of hyperuricemia by sitting time were different in the 'agricultural, forestry and fishery skilled workers' only in men. On the other hand, the prevalence with high-risk drinking, both men and women showed differences in 'managers, experts and related workers' and 'office worker'. Also, only women have differences in 'service and sales workers', 'technicians, equipment, machine operation and assembly workers' and 'unemployed'. These results inform men have a higher prevalence and risk of hyperuricemia and suggest that health care policies and medical services are needed to prevent it by occupational group.

• Journal of the Ergonomics Society of Korea
• /
• v.29 no.2
• /
• pp.225-239
• /
• 2010

A high prevalence of farmer's work-related musculo-skeletal disorders (MSDs) have been reported in precedent studies. Risk factors - physical, chemical, biological, ergonomic risk factor etc. - in farm-work were identified by previous studies. To prevent farmers from exposing to them and reduce, Agricultural Safety Technology were introduced and used on farm. The purpose of this study is to review and summarize the agricultural safety technology on farm in Korea. According to strategy principles, this technology is classified as four criteria - workload reduction by reducing awkward posture, workload reduction by using manual material handling aids, Comfort improvement by protecting worker from hot, cold environment and work efficiency improvement by workplace redesign and cultivation modification. This technology includes transporting tools, working cloth, personal protective equipment, and pesticide-proof Clothing. Anthropometric study of Korean farmers was also carried out to support the development of equipment and clothes. In long terms, it needs to precaution activity from risk factors by using cultivation modification and working improvement. Although working condition gets better and workload reduce by this technology, it required customized safety technology in each crops - rice cultivation, horticulture and livestock farming. And farmers should use the assistive technology and participate voluntarily in ergonomic intervention program.

• Journal of the Korea Safety Management & Science
• /
• v.12 no.2
• /
• pp.25-33
• /
• 2010

Nowadays worldwide leading companies try to establish more efficient and comprehensive management system for getting high quality, reliability and safety. In this paper, we investigate standards for quality management, dependability management and risk management. We also suggest an integrated and comprehensive system of quality(ISO/TS16949), dependability (IEC60300)and risk(JIS Q2001). The evaluation method on the performance of dependability management systems are developed and applied for the semiconductor equipment company.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.19 no.3
• /
• pp.25-38
• /
• 2023

Instrumentation and control systems measure and control various variables of nuclear facilities to operate nuclear power plants safely. A diverse protection system, a representative instrumentation and control system, generates a reactor trip and turbine trip signal by high pressure in a pressurizer and containment to satisfy the design requirements 10CFR50.62. Also, it generates an auxiliary feedwater actuation signal by low water levels in steam generators. Cybersecurity has become more critical as digital technology is gradually applied to solve problems such as performance degradation due to aging of analog equipment, increased maintenance costs, and product discontinuation. This paper analyzed possible cybersecurity threat scenarios in the diverse protection system using attack trees. Based on the analyzed cybersecurity threat scenario, we calculated the probability of attack occurrence and confirmed the cybersecurity risk in connection with the asset value.

• Journal of Electrical Engineering and Technology
• /
• v.9 no.3
• /
• pp.957-963
• /
• 2014

Converter transformers play important roles in high-voltage direct current transmission systems. This paper presents experimental and analysis results of the combined electrical and thermal aging of oil-impregnated paper at pulsating DC voltages. Breakdown voltages and time-to-breakdown of oil-paper specimens were measured by using short-time and constant-stress tests. The breakdown characteristics of combined electrical and thermal aging on insulation system were discussed. According to the relationship between failure time and aging temperature, the two-parameter Weibull model was improved. On the basis of the competing risk algorithm and the improved Weibull model, the two factors failure model was calculated. And the influence of temperature in the insulation system has been analyzed. This model performs better than the two-parameter Weibull model when both time and temperature are considered as variables in estimating the lifetime of oil-paper insulation.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.20 no.10
• /
• pp.1-8
• /
• 2021

Cylinder liners used in diesel engines of combat equipment are prone to cavitation due to wet cooling. The damage caused by erosion and corrosion due to cavitation has a fatal effect on the performance and lifespan of a diesel engine. Therefore, a study was conducted to improve the durability of cylinder liners. Two surface treatment techniques were proposed: nitriding and chrome plating. It was observed that the amount of erosion on the surface of nitride-treated cylinder liners was high because the surface-treated part eroded due to its weak impact resistance against the bubble explosion generated by cavitation. In contrast, the chrome-plated cylinder liner had a lower amount of erosion among the specimens subjected to the accelerated test. These results verified that the resistance of chrome-plated liners against cavitation is high. Therefore, it can withstand the impact of bubble explosion. If the chrome plating thickness is set with reference to the KS standard, an exceptional durability of abrasion, wear resistance, and corrosion resistance can be obtained. If the thickness is set between 120~250㎛, it is expected that the durability of the cylinder liner can be improved. Although a recovery method for corroded cylinder liners is suggested, the proposed method has an inherent risk of crack generation. Therefore, further research is required to solve this problem.

• Particle and aerosol research
• /
• v.16 no.4
• /
• pp.73-94
• /
• 2020

Particulate infectious sources, including infectious viruses, can float in the air, causing airborne infections. To prevent indoor airborne infection, dilution control by ventilation and indoor air cleaners are frequently used. In this study, the risk of airborne infection by the operation of these two techniques was evaluated. In case of dilution control by ventilation, a high efficiency air filter was embedded at the inlet of supply air. In this study, infectious source reduction devices such as indoor air cleaner include all kinds of mechanical-filters, UV-photo catalysts and air ionizers through which air flow is forced by fans. Two mathematical models for influenza virus were applied in an infant care room where infants and young children are active, and the risk reduction efficiency was compared. As a result, in the case of individually operating the ventilator or the infectious source reduction device, the airborne infection risk reduction efficiencies were 55.2~61.2% and 53.8~59.9%, respectively. When both facilities were operated, it was found that the risk of airborne infection was reduced about 72.2~76.8%. Therefore, simultaneous operation of ventilation equipment and infectious source reduction device is the most effective method for safe environment that minimizes the risk of airborne infection of respiratory infectious diseases. In the case of a space where sufficient ventilation operation is difficult, it was found that the operation of an infectious source reduction device is important to prevent the spread of infectious diseases. This study is meaningful in that it provides an academic basis for strategies for preventing airborne infection of respiratory infectious diseases.

• Nuclear Engineering and Technology
• /
• v.56 no.6
• /
• pp.2352-2366
• /
• 2024

Reinforced concrete (RC) shear walls with precast steel-concrete composite modular (PSCCM) are strongly recommended in the structural design of nuclear power plants due to the need for a large number of process pipeline crossings and industrial construction. However, the effect of the PSCCM on the mechanical behavior of the whole RC shear wall is still unknown and has received little attention. In this study, three 1:3 scaled specimens, one traditional shear wall specimen (TW) and two shear wall specimens with the PSCCM (PW1, PW2), were designed and investigated under cyclic loadings. The failure mode, hysteretic curve, energy dissipation, stiffness and strength degradations were then comparatively investigated to reveal the effect of the PSCCM. Furthermore, numerical models of the RC shear wall with different PSCCM distributions were analyzed. The results show that the shear wall with the PSCCM has comparable mechanical properties with the traditional shear wall, which can be further improved by adding reinforced concrete constraints on both sides of the shear wall. The accumulated energy dissipation of the PW2 is higher than that of the TW and PW1 by 98.7 % and 60.0 %. The failure of the shear wall with the PSCCM is mainly concentrated in the reinforced concrete wall below the PSCCM, while the PSCCM maintains an elastic working state as a whole. Shear walls with the PSCCM arranged in the high stress zone will have a higher load-bearing capacity and lateral stiffness, but will suffer a higher risk of failure. The PSCCM in the low stress zone is always in an elastic working state.