• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2010년도 추계학술대회 초록집
• /
• pp.75.2-75.2
• /
• 2010

Polymer electrolyte fuel cells (PEFCs) have received a lot of attention as a power source for both stationary and mobile applications due to their attractive feature. In general, the performance of PEFCs is highly affected by the property of the electrodes. A PEFC electrode essentially consists of a gas diffusion layer and a catalyst layer. The gas difusion layer is highly porous and hydrophobicized with PTFE polymer. The catalyst layer usually contains electrocatalyst, proton conducting polymer, even PTFE as additive. Particularly, the proton conducting ionomer helps to increase the catalytic activity at three-phase boundary and catalyst utilization. Futhermore, it helps to retain moisture, resulting in preventing the electrodes from membrane dehydration. The most widely used proton conducting ionomer is perfluorinated sulfonic acid polymer, namely, Nafion from DuPont due to its high proton conductivity and good mechanical property. However, there are great demands for alternative ionomers based on non-fluorinated materials in terms of high temperature availability, environmental adaptability and production cost. In this study, the electrodes with the various content of the sulfonated poly(ether sulfone) ionomer in the catalyst layer were prepared. In addition, we evaluated electrochemical properties of the prepared electrodes containing the various amount of the ionomers by using the cyclic voltammetry and impedance spectroscopy to find an optimal ionomer composition in the catalyst layer.

• 한국위성정보통신학회논문지
• /
• 제10권2호
• /
• pp.90-94
• /
• 2015

본 연구에서는 Solution Process를 적용한 Strontium Oxide를 배향막으로 사용한 경우의 액정배향 특성에 대해서 연구하였다. Stronium Oxide 는 High K 물질로 배향막으로 사용할 경우 임계치 전압을 효율적으로 조절할 수 있는 장점이 있으나, 액정분자와의 배향에 관한 상호관계에 대해서는 많은 연구가 진행되지 않았었다. 0.1~0.4 Mol 롤 농도를 조절한 Strontium Oxide를 Solution Process 로 배향막으로서 제조함으로써, 보다 생산성이 좋은 방법을 제시할 수 있었으며, 재료가 갖는 우수한 특성을 반영한 액정디스플레이의 제조가 가능하였다. 샘플 측정결과 1.447~1.613V 의 임계치 전압특성을 보여주어 기존의 방법으로 제조된 액정디스플레 이와 동등 혹은 우월한 특성을 갖고 있음을 알 수 있었다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 추계학술대회논문집A
• /
• pp.105-110
• /
• 2001

It has recently been raised main issue how solve the problem of insufficient energy. One of the solution is to increase the thermal efficiency of power generation system. For the purpose of high efficiency, it is necessary to increase the steam temperature and pressure. So, the use of modified $9{\sim}12%Cr$ steel having superior creep rupture strength and oxidation resistance is required to endure such severe environment. The evaluation of creep properties of those heat resistance material is very important to secure the reliability of high temperature and pressure structural components. Since creep properties are determined by microstructural change such as carbide precipitation and coarsening, It is certain that there are some relationship between creep properties and hardness affected by microstructure. In this study, SP-Creep ruptured test for newly developed 9Cr steel being used as boiler valve material was performed, and creep properties of the material were evaluated. Also, hardness test were performed and hardness results were related to the creep properties such as LMP and creep strength to verify the availability of SP-Creep test as creep test method.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 추계학술대회논문집A
• /
• pp.99-104
• /
• 2000

This paper describes the high temperature creep characteristics for virgin material of 9Cr1MoVNb steel using small punch creep(SP-Creep) test technique which is developing recently. In addition, the several results of SP-Creep test are compared with that of 2.25Cr- 1Mo steel which is widely used as boiler materials and that of conventional uniaxial creep test. The obtained SP-Creep curves show the creep behaviors of three regimes like that obtained from conventional uniaxial creep test, and SP-Creep properties are definitely depended on applied load and test temperature. The correlation of SP-Creep rate and creep rupture life with applied load has been determined like the correlation between creep rate/rupture life and stress in uniaxial creep test, and also is satisfied with Power law. The creep rupture times of newly 9Cr1MoVNb steel are higher than those of 2.25Cr1Mo steel at the same creep temperature and applied loading condition, and the decrease extent of creep rupture life with loads is very lower compared with 2.25Cr1Mo steel.

• 융합정보논문지
• /
• 제7권4호
• /
• pp.75-81
• /
• 2017

정보기술의 디자인 트렌드는 시대에 따라 빠르게 변해왔으며, 최근의 정보 디스플레이의 디자인 트렌드는 베젤리스 디스플레이가 대세이다. 베젤리스 또는 에지리스 디스플레이는 휴대폰 디스플레이의 새로운 트렌드로 부상하고 있다. 본 논문에서는 이른바 베젤리스 디스플레이라고 불리는 기기 면적 대비 높은 화면 비율을 갖는 터치패널 디스플레이의 조립 공정에 적합한 차광 테이프를 개발하였다. 차광 테이프는 자외선 경화형 아크릴계 감압성 점착제를 PET 필름 위에 롤투롤 공정으로 코팅하여 제조하였다. 자외선 경화형 감압성 점착제는 톨루엔을 전혀 사용하지 않는 친환경적인 제조 방법으로 합성되었다. 제조된 차광 테이프의 점착력은 자동화된 인장시험기로 분석하였으며, 형상유지 특성인 칙소성은 주사 전자 현미경으로 분석하였다. 그 결과 제조된 차광 테이프는 터치패널 디스플레이의 조립 공정에 적합한 높은 점착력과 우수한 칙소성을 나타내었다. 이러한 기능성 차광 테이프의 개발은 그 동안 차광 테이프의 칙소성 부족으로 인하여 야기되었던 터치 패널 디스플레이 조립 공정의 생산성향상 및 품질안정성 향상에 기여할 것으로 기대된다.

• Smart Structures and Systems
• /
• 제6권5_6호
• /
• pp.731-748
• /
• 2010

Impact detection and health monitoring are very important tasks for civil infrastructures, such as bridges. Piezoceramic based transducers are widely researched for these tasks due to the piezoceramic material's inherent advantages of dual sensing and actuation ability, which enables the active sensing method for structural health monitoring with a network of piezoceramic transducers. Wireless sensor networks, which are easy for deployment, have great potential in health monitoring systems for large civil infrastructures to identify early-age damages. However, most commercial wireless sensor networks are general purpose and may not be optimized for a network of piezoceramic based transducers. Wireless networks of piezoceramic transducers for active sensing have special requirements, such as relatively high sampling rate (at a few-thousand Hz), incorporation of an amplifier for the piezoceramic element for actuation, and low energy consumption for actuation. In this paper, a wireless network is specially designed for piezoceramic transducers to implement impact detection and active sensing for structural health monitoring. A power efficient embedded system is designed to form the wireless sensor network that is capable of high sampling rate. A 32 bit RISC wireless microcontroller is chosen as the main processor. Detailed design of the hardware system and software system of the wireless sensor network is presented in this paper. To verify the functionality of the wireless sensor network, it is deployed on a two-story concrete frame with embedded piezoceramic transducers, and the active sensing property of piezoceramic material is used to detect the damage in the structure. Experimental results show that the wireless sensor network can effectively implement active sensing and impact detection with high sampling rate while maintaining low power consumption by performing offline data processing and minimizing wireless communication.

• 한국멀티미디어학회논문지
• /
• 제23권7호
• /
• pp.870-882
• /
• 2020

It is that failure of equipment at the factory site causes personal injury and property damage. We are required a real-time monitoring and risk forecasting techniques to prevent for equipment failure. In this paper, we proposed a 3-phase smart plug and real-time monitoring system that can be used in factories, and collected environmental information and power information using a smart plug to analyze the data. In order to analyze the correlation between the risk situation and the collected data, we predicted the risk situation using Linear Regression, SVM, and ANN algorithms. As a result, the SVM and ANN algorithms obtained high predictive accuracy and developed a mobile app that could use it to check the risk forecast results.

• 한국염색가공학회지
• /
• 제29권1호
• /
• pp.18-24
• /
• 2017

Meta-aramid fabric has been widely used as the reinforcement of composites due to its high flame resistance and tearing strength. Functionality such as abrasion resistance of fabric is very important for specialty fabrics used in car racing suits. In this study, to improve abrasion resistance property of meta-aramid fabric, silicon deposition was conducted by utilizing RF magnetron sputtering. The sputtering process parameters effects were investigated as sputtering power and substrate temperature. The obtained results suggest that the silicon deposition on the meta-aramid fabric has obvious effect upon increasing the abrasion resistance, the thermal insulation and the electric resistance condition for silicon deposition was established. In conclusion, the results of this study have made it possible to manufacture meta-aramids with higher abrasion strength.

• 동력기계공학회지
• /
• 제2권2호
• /
• pp.55-59
• /
• 1998

In practice, the property of nonlinearity is contained in all physical systems. In other word, all physical systems are nonlinear to some degree. Therefore it is important that we acquires a facility for analyzing feedback control systems with varying degrees of nonlinearity. To operate the system linearly over wide range of variation of signal amplitude and frequency, the system requires components of an extremely high quality. Such a system would probably be impractical in the view points of cost, space and weight. In this context of view, it is worth noting that the nonlinearities may be intentionally introduced into a system in order to compensate for the effects of other undesirable nonlinearities or to obtain better performance than what could be achieved using linear element only. A simple example of an intentional nonlinearity is the use of a nonlinear damped system to optimize response in accordance with the magnitude of error. In this paper, an on-off type nonlinear controller is introduced and the applicability and validity of a simple on-off controller are presented by the experimental result.

• 정보처리학회논문지C
• /
• 제12C권4호
• /
• pp.511-518
• /
• 2005

왈시-하다마다 변환(Walsh-Hadamard Transform, WHT)을 적용한 OFDM(Orthogonal Frequency Division Multiplexing) 변조방법은 시스템의 PAPR(Peak-to-Average Power Ratio)을 줄여주고, 시스템의 BER(Bit Error Rate) 성능을 향상시키는 장점이 있다. 그러나 기존의 이러한 왈시-하다마다 변환에 기반한 OFDM 시스템은 여전히 비교적으로 높은 PAPR문제가 있다. 그러므로 본 논문에서는 DGT(Data Grouping Technique)이라고 부르는 기술을 제안하고, 이 기술과 왈시-하다마다 변환 기술을 적용하여 PAPR을 더욱 줄여주는 OFDM 시스템을 설계한다. 제안한 DGT기술은 WHT-OFDM뿐만 아니라 일반 OFDM에서 PAPR을 줄여주는 방법들 중에서 큰 단점이 되는 부가정보(side information)가 성능에 대해 독립성을 가진다는 특징이 있다. 컴퓨터 시뮬레이션을 통해 제안한 시스템의 유용성을 검사하고 성능을 검증하였다.