• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.28 no.4
• /
• pp.286-297
• /
• 2017

This paper is a study of 6~18 GHz wideband high power amplifier which is composed of 10 single amplifier and coaxial type spatial power combiner. The property of this spatial power combiner is on a similar principle to antipodal antenna radiation mechanism. Therefore, the key structure of proposed spatial power combiner is the antipodal finline PCB board and the finline curve shape is numerically synthesized by using Klopfensein's optimum impedance taper. The measured CW output power of spatial combined high power amplifier is nearly 50 W. In conclusion we prove the good combining performance between the spatial power combiner and 10 single amplifier over 6~18 GHz frequency ranges. Also, we developed the key component PA and MFC MMIC which controls the phase and gain of the each amplifier, The main characteristic of MFC MMIC is to maximize combining efficiency of power amplifier.

• Proceedings of the IEEK Conference
• /
• 2004.08c
• /
• pp.499-502
• /
• 2004

A two-stage Class E power amplifier operated at 2.44GHz is designed in 0.25-$\mu$m CMOS process for Class-l Bluetooth application. The power amplifier employs c1ass-E topology to exploit its soft-switching property for high efficiency. A preamplifter with common-mode configuration is used to drive the output-stage of Class-E type. The amplifier delivers 20-dBm output power with 70$\%$ PAE (power -added-efficiency) at 2-V supply voltage.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.9 no.2
• /
• pp.295-300
• /
• 2005

In this paper we have designed a two-stage Class I power amplifier operated at 2.4CHz for Class-1 Bluetooth application. The power amplifier employs class-I topology to exploit its soft-switching property for high efficiency. The latch-structured pre-amplifier with amplifiers makes its output signal as sharp as possible for soft switching of the next power amplifier. It improves the overall efficiency of the proposed power amplifier. It shows 65.8$\%$ PAE, 20dB power gain and 20dBm output power.

• Proceedings of the IEEK Conference
• /
• 2007.07a
• /
• pp.73-74
• /
• 2007

In this paper, we design hybrid limitter balanced(HLB) power amplifier with W-CDMA signal input. Balanced power amplifier is important component that decide efficiency in communication system. General balanced power amplifier has low efficiency and high distortion characteristics. Therefore, we embodied two path with limitter that amplitude path had high efficiency amplifier using limitter and phase path had high linear amplifier to improve such problem.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.10 no.8
• /
• pp.945-952
• /
• 2015

Power amplification device which is matched to $50{\Omega}$ in order to achieve a high efficiency of a power amplifier using a GaN power amplification device, since there is a limit of application frequency bands, output power, efficiency characteristics selection, in this study based on the measurement data through the source/load-pull test, high output power and to extract quantitative input and output impedance that matches the design objectives of high output power, high efficiency, an implementation of the high efficiency power amplifier. Implemented power amplifier is shows 25watt(44dBm), PAE of 66-76% characteristics in the frequency band of 2.7-3.1 GHz.

• Journal of Navigation and Port Research
• /
• v.30 no.5 s.111
• /
• pp.351-356
• /
• 2006

In this paper, the high efficiency Doherty power amplifier has been designed and realized for microwave applications. The Doherty amplifier has been implemented using silicon MRF 281 LDMOS FET. The RF performances cf the Doherty power amplifier (a combination of a class AB carrier amplifier and a bias-tuned class C peaking amplifier) have been compared with those of a class AB amplifier alone. The realized Doherty power amplifier P1dB output power has 33dBm at 2.3GHz frequency. Also the Doherty power amplifier shows 11dB gain and -17.8dB input return loss at 2.3GHz to 2.4GHz. The designed Doherty amplifier has been improved the average PAE by 10% higher efficiency than a class AB amplifier alone. The Maximum PAE of designed Doherty power amplifier has been 39%.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2006.06b
• /
• pp.91-96
• /
• 2006

In this paper, the high efficiency Doherty power amplifier has been designed and realized for microwave applications. The Doherty amplifier has been implemented using silicon MRF 281 LOMOS FET. The RF performances of the Doherty power amplifier (a combination of a class AB carrier amplifier and a bias..tuned class C peaking amplifier) have been compared with those of a class AB amplifier alone. The realized Doherty power amplifier PldB output power has 33dBm at 2.3GHz frequency. Also the Doherty power amplifier shows 11dB gain and -17.8dB input return loss at 2.3GHz to 2.4GHz. The designed Doherty amplifier has been improved the average PAE by 10% higher efficiency than a class AB amplifier alone. The Maximum PAE of designed Doherty power amplifier has been 39%.

• Journal of Advanced Marine Engineering and Technology
• /
• v.31 no.5
• /
• pp.575-582
• /
• 2007

In this paper, a 100 Watt high power amplifier has been implemented and performed evaluation, which is operating at UHF band ($470\;{\sim}\;806\;MHz$) for Digital TV repeater. To achieve increase of bandwidth and high power capability, 3-way power combiner and divider of Wilkinson type was adopted. In order to measure the fabricated 100 Watt power amplifier, the estimation technique function which makes equivalent mask was used. As a result of the measurement, the existence of pilot signal is confirmed and the signal transmitted at the rated output power 100 Watt is brought out the flat feature through 6 MHz bandwidth. and it resulted that its value was less than -47 dB at the edge of radiation channel and less than -110 dB at more than 6 MHz position from channel edge.

• Journal of Satellite, Information and Communications
• /
• v.11 no.1
• /
• pp.1-5
• /
• 2016

In this paper, High Power Pulsed Amplifier with wide-band characteristic is implemented for L-band Navigational Aid(NAVAID). Due to the characteristics of L-Band NAVAID, implemented SSPA is demanded characteristics of high RF power, high linearity and high efficiency. Therefore, in this paper, efficiency characteristic is improved by modified class F technique. And linearity characteristic is improved by balance structure using hybrid coupler, $2^{nd}$ & $3^{rd}$ harmonic trap and anti-phase technique using non-linear characteristics of drive amplifier. Implemented SSPA shows that bandwidth of 300MHz, RF Output power of 1.5KW and efficiency of 55%.

• Proceedings of the IEEK Conference
• /
• 1999.06a
• /
• pp.191-194
• /
• 1999

The balanced amplifier is a practical amplifier to, implement a broadband amplifier that has flat gain and good input and output VSWR. Three-stage amplifier design procedure usually divided into three partition satisfying the following requirements : low noise figure, high gain and high power output. FHX35LG HEMT device is used in the design can be obtained low noise figure at the first-stage, MGA82563 MMIC device is used in the design can be maintained high gain at the second-stage, and AHI MMIC device is used in the design can be required high power output at the third-stage. The results of three-stage balanced amplifier show that power gain is about 40㏈, noise figure is less than 1.2㏈ at operating frequency.