• Journal of the Korean Society of Safety
• /
• v.32 no.4
• /
• pp.129-136
• /
• 2017

This study investigated the probability of possible accident through qualitative and quantitative analysis of the pressure safety valve types installed in facilities using high pressure gas to compare the installation domestic and foreign pressure safety valve standards sought the safety characteristics and safety improvement direction accordingly. The three types are the case where the shut-off valve is not installed at the front of the PSV (Case A), If a shut-off valve is installed at the front of the PSV for inspection (Case B) and If a shut-off valve is installed in front of PSV (C.S.O), PSV is installed in parallel (Case C). Three types of cases were compared with FTA and HAZOP. The results of study of the possible accidents due to over-pressure safety valve installation type, used in a high-pressure gas facilities was shows in the following order Case B > Case A > Case C. The results of analysis through FTA was in order to protect the reservoir for the possible occurring of accident the safety valve installation is depend on its type. In the FTA analysis, defects in the device itself which attached to the storage tank as a substitute for analysis of the probability of operator mistakes was Case B with as high as $2.01{\times}10^{-6}$. Depending on the type of installation analysis of Case B in order to ensure safety is prohibited to install shut-off valve and believes that mandatory regulations are needed. Rationally installing of pressure safety valve in the high pressure using facilities will be expected to improve the industrial safety from severe accidents such as high-pressure gas fire explosion.

• Korean Journal of Medicinal Crop Science
• /
• v.27 no.4
• /
• pp.278-283
• /
• 2019

Background: High temperature damage in ginseng is influenced by shading materials related not only to temperature, but also to light intensity and light quality. To address, this green-colored khaki shading sheet is widely used. As they are recently, developed, there is limited research information about their attributes and use. Methods and Results: The four-layered shading net (FLSN), blue-colored shading sheet (BCSS), aluminum-coated shading board (ACSB), and green-colored shading sheet (GCSS) were installed in the wooden A type of sun-block facilities. Two layered black, shading net was additionally used to cover the facilities since the beginning of June. The average temperature at the facility where different shades were tested was in the order of BCSS ($28.9^{\circ}C$) > FLSN ($27.7^{\circ}C$) > GCSS ($27.6^{\circ}C$) > ACSB ($27.1^{\circ}C$). However, high temperature injury rates were in order: FLSN > ACSB > GCSS > BCSS. Root weight vaired and was in the order: ACSB > GCSS > BCSS > FLSN. Conclusions: High temperature damage is possible not only because of temperature increase, but also due to various environmental light factors. Ginseng high temperature injury was minimal when BCSS or GCSS were used by difference of light quality. Although the root weight was higher in ACSB, it could be vulnerable to high temperature damage. Therefore, we propose using GCSS for ginseng shading.

• Nuclear Engineering and Technology
• /
• v.54 no.5
• /
• pp.1825-1834
• /
• 2022

Performing high-fidelity computational fluid dynamics (HF-CFD) to predict the flow and heat transfer state of the coolant in the reactor core is expensive, especially in scenarios that require extensive parameter search, such as uncertainty analysis and design optimization. This work investigated the performance of utilizing a multi-fidelity reduced-order model (MF-ROM) in PWR rod bundles simulation. Firstly, basis vectors and basis vector coefficients of high-fidelity and low-fidelity CFD results are extracted separately by the proper orthogonal decomposition (POD) approach. Secondly, a surrogate model is trained to map the relationship between the extracted coefficients from different fidelity results. In the prediction stage, the coefficients of the low-fidelity data under the new operating conditions are extracted by using the obtained POD basis vectors. Then, the trained surrogate model uses the low-fidelity coefficients to regress the high-fidelity coefficients. The predicted high-fidelity data is reconstructed from the product of extracted basis vectors and the regression coefficients. The effectiveness of the MF-ROM is evaluated on a flow and heat transfer problem in PWR fuel rod bundles. Two data-driven algorithms, the Kriging and artificial neural network (ANN), are trained as surrogate models for the MF-ROM to reconstruct the complex flow and heat transfer field downstream of the mixing vanes. The results show good agreements between the data reconstructed with the trained MF-ROM and the high-fidelity CFD simulation result, while the former only requires to taken the computational burden of low-fidelity simulation. The results also show that the performance of the ANN model is slightly better than the Kriging model when using a high number of POD basis vectors for regression. Moreover, the result presented in this paper demonstrates the suitability of the proposed MF-ROM for high-fidelity fixed value initialization to accelerate complex simulation.

• Proceedings of the Optical Society of Korea Conference
• /
• 2002.07a
• /
• pp.228-229
• /
• 2002

강한 세기의 레이저가 원자에 입사하여, 조사된 레이저 파장의 홀수 배에 해당하는 파장을 가진 빛이 여러 차수에 걸쳐 발생하는 것을 고차조화파(high-order harmonics)라고 한다. (1.2) 고차조화파를 이용하면 고가의 방사광 가속기로 발생시키는 연엑스선 영역의 빛을 작은 비용과 작은 규모의 장비로 발생시킬 수 있으므로 많은 주목을 받고 있다. 고차조화파는 기본적으로 원자의 공간적인 대칭성과 레이저 전기장의 시간적 주기성에 의해 홀수 차수에서 발생하게 된다. (중략)

• Proceedings of the Optical Society of Korea Conference
• /
• 2002.07a
• /
• pp.112-113
• /
• 2002

최근에 극초단 고출력 레이저가 개발됨에 따라 이에 의한 강한 비선형 현상중의 하나인 고차 조화파(high-order harmonics)의 발생이 가능하게 되었다. 조사 레이저와 원자 간의 결맞는 과정에 의해서 생성된 고차 조화파는 레이저와 같은 좋은 결맞음과 펨토초 이하의 아주 짧은 펄스폭을 가질 수 있기 때문에 플라즈마 진단, 극자외선 광원을 이용한 비선형 광학, 아토초 영역의 물리적 현상을 관측하는데 아주 유용한 광원이 될 것으로 여겨져 오고 있다. (중략)

• Journal of Environmental Health Sciences
• /
• v.20 no.3
• /
• pp.78-84
• /
• 1994

The effects of heavy metal, Cd on the degradation of the herbicide butachlor (N-Butoxymethyl-2-chlor-2',6'-diethylacetanilide) in soils were examined the laboratory. The degradation of the herbicide in soil was greatly inhibited by the amendment of the heavy metal, Cd. The inhibited rate of Cd concentration was high in the order of 30 ppm>20 ppm> 10 ppm>0 ppm. And tile degradation rate of butachlor was high in order of 80 $\mu$M>40 $\mu$M>20 $\mu$M. The effects of Cd on the degradation of the butachlor in soil varied with concentration of heavy metal and butachlor.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.54 no.7
• /
• pp.339-342
• /
• 2005

We present a new high-frequency equivalent circuit model for 52pin QFP used in typical IC's and extract R, L, and C values of this circuit model using a 3-D E & M field simulator. Futhermore, L and C value variations as a function of Pin number due to the shape differences of the leads have been fitted to 2nd order polynomials in order to extend the applicability of this model.

• Journal of applied mathematics & informatics
• /
• v.28 no.1_2
• /
• pp.295-309
• /
• 2010

In this paper, we study delayed high-order Cohen-Grossberg neural networks with reaction-diffusion terms and Neumann boundary conditions. By using inequality techniques and constructing Lyapunov functional method, some sufficient conditions are given to ensure the existence and convergence of the periodic oscillatory solution. Finally, an example is given to verify the theoretical analysis.

• 한국전산유체공학회:학술대회논문집
• /
• 2003.08a
• /
• pp.56-62
• /
• 2003

The WENO filter is presented for unsteady flow analysis. The filter is low dissipative and dispersive. The results using the present WENO filter show more accurate resolution than those using other filters. The numerical analyses for several test cases are performed.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.22 no.4
• /
• pp.442-451
• /
• 1998

The purpose of this study was to investigate the current brand of mail-order clothing, consumers' attitude over importance of brand and the effectiveness of brand when consumers purchase clothing by mail-order shopping. for this study, mail order catalogs were analyzed and the samples were collected through the questionaire distributed to 214 women. It was analyzed by SAS package. The results are as follows; 1. As a result of mail-order catalog analysis, domestic clothing included few famous brand except foreign brand. 2. The users of mail-order purchasing were old and married women comparably. They were also high clothing-expense users and housekeepers. Item that consumers wanted to buy using mail-order shopping were home-wear, night-wear, accessories and scarves which were involved low risks comparably. 3. Consumers regard brand significantly as a means of credit in purchasing mail-order shopping clothing. In analysis between importance of mail-order clothing brand and demographics, degree of education and clothing expense per month showed significant difference.