• Transactions on Electrical and Electronic Materials
• /
• v.17 no.2
• /
• pp.92-97
• /
• 2016

This paper presents design and simulation of wide band RF microswitch that uses electrostatic actuation for its operation. RF MEMS devices exhibit superior high frequency performance in comparison to conventional devices. Similar techniques that are used in Very Large Scale Integration (VLSI) can be employed to design and fabricate MEMS devices and traditional batch-processing methods can be used for its manufacturing. The proposed switch presents a novel design approach to handle reliability concerns in MEMS switches like dielectric charging effect, micro welding and stiction. The shape has been optimized at actuation voltage of 14-16 V. The switch has an improved restoring force of 20.8 μN. The design of the proposed switch is very elemental and primarily composed of electrostatic actuator, a bridge membrane and coplanar waveguide which are suspended over the substrate. The simple design of the switch makes it easy for fabrication. Typical insertion and isolation of the switch at 1 GHz is -0.03 dB and -71 dB and at 85 GHz it is -0.24 dB and -29.8 dB respectively. The isolation remains more than - 20 db even after 120 GHz. To our knowledge this is the first demonstration of a metal contact switch that shows such a high and sustained isolation and performance at W-band frequencies with an excellent figure-of merit (fc=1/2.pi.Ron.Cu =1,900 GHz). This figure of merit is significantly greater than electronic switching devices. The switch would find extensive application in wideband operations and areas where reliability is a major concern.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.10 no.4 s.50
• /
• pp.77-84
• /
• 2006

Recently, as large structures such as high-rise building and long span bridge become lighter and more flexible, the necessity of structural control for reducing excessive dynamic response due to seismic excitation is increased. In this study, a semi-active base isolation system using Magneto-Sensitive (MS) rubbers is proposed to effectively protect structures against earthquakes. MS Rubber is a class of smart controllable materials whose mechanical properties change instantly by the application of a magnetic field. To demonstrate the performance of this device, the MS Rubber isolation system is compared to Lead-Rubber Bearing (LRB) isolation systems and judged based on computed responses to several historical earthquakes. The MS Rubber isolation system is shown to achieve notable decreases in base drifts over comparable passive systems with no accompanying increase in base shears or in accelerations imparted to the superstructure. The proposed MS Rubber system is shown to perform better than the passive isolation system.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2008.11a
• /
• pp.105-108
• /
• 2008

For the early seismic isolation design in Korea, foreign products of isolation bearings were used. But these days, the application of domestic products of isolation bearings is increasing. However various experimental studies can be found very seldom on the extreme and lonr term behaviors of isolation bearings. In this study, we considered the laminated rubber type isolation bearings that have many application cases in Korea and we evaluated their shear strength, long term characteristics such as aging and creep affecting shear strength of bearings in long term period. For the reality of experiments, fabricated isolation bearing specimens are designed for a real structure and shear loading was applied under design compressive loads. To evaluated aging effect, the specimens were exposed to high temperature environment for certain period and their shear properties were measured to compare with their original values. Also we measured creep amount of isolation bearings under constant compressive load for 1,000 hours and estimated creep amount after 60 years compatible with general life cycle of bridges.

• 한국노년학
• /
• v.30 no.3
• /
• pp.895-910
• /
• 2010

This study examined the mediating effect of social isolation on the life satisfaction among lowincome older adults. The purpose of this study was to find out isolated older adults' social isolation rate and mediating effect of sense of community by community dwelling older adults with loweconomic status. This study used the Gijang Welfare Network study(2009). The sample consisted 256 older adults 65 and older residing in Busan(Gijang). As statistical method, correlation analysis and structural equation model used in this paper. The results of this study suggested some practical implications in reducing social isolation for older adults with low economic status. We need to emphasize social relations and social participations as well as outreach program for high-risk elderly of social isolation. In addition, Findings suggested that community based interventions should be provided to protect older people, especially poor elderly from social isolation.

• The Journal of the Korean Society for Microbiology
• /
• v.11 no.1
• /
• pp.69-78
• /
• 1976

There have been increasing reports of mycobacterioses in man and animals caused by "atypical" or "opportunist" mycobacteria. At the presnt, "opportunist mycobacterioses" are not generally responsive to antituberculosis drugs, and therefore, create considerable problems with regard to chemotherapy and control measures. In recent years studies have been made to isolate opportunist mycobacteria from soil, house-dusts and tap-water. It seemed quite interesting to define the extent of circumstantial presence of "opportunist" mycobacteria and nocardia in the soils of school-ground of primary schools and middle-high schools. This communication is the results of pilot study to isolate and identify "opportunist" mycobacteria and nocardia from 504 soil specimens of 72 schools in Seoul City. 1. Of a total of 59 isolates from 504 soil specimens tested, 32 strains were identified as opportunist mycobacteria and 27 strains as nocardia. 2. Isolation rates of opportunist mycobacteria by the areas(of specimen collection) were as follows: 36.4% in the southern area of Han-River, 33.3% in the central area, 22.7% in the outskirt area and 16.6% in the intermediate area. There observed no apparent difference in the isolation rates both-between the areas and between primary schools and middle-high schools. However, a significant difference was noted in the isolation rates between the places of soil sampling in a given school(P<0.05), i.e., the highest was the soil of refuge heaps(15.2%), and tap-water pole area(11.1%), the school-lavatory entrance(9.7%), the school gate entrance(5.5%), and iron-bar play ground(2.7%). The soil specimens from the center of school ground and from school building entrance yielded none of mycobacterial isolates. 3. Isolation rates of nocardia by the areas were as follows: 33.3% in the central area, 31.8% in the outskirt area, 27.3% in the southern ares of Han-River and 11.1% in the intermediate area. As in the case of mycobacteral isolates, there observed no apparent differences in the isolation rates both between the areas and between primary schools and middle-high schools, but a significant difference was noted between the places of soil sampling(P<0.05), i.e., the highest was the soil of school building entrance(15.2%), and of school gate entrance(6.9%), refuge heaps(5.5,%), iron-bar play ground(4.1%), the school-lavatory entrance(2.7%) and tap-water pole area(2.7%), respectively. The soil specimens from the center of, school ground yielded none of nocardia isolates. 4. Of the 32 strains of isolated mycobacteria. 15 strains were slow-growing mycobacteria and the remaining 17 strains belonged to the rapid growers. Of the 15 slow-growers. 4 strains were M. scrofulaceum-szulgai complex, 3 M. gordonae, 4 M. terrae-triviale complex, 2 M. avium-intracellulare-xenopi complex, and 2 unclassified schotochromogens. Of the 17 strains of rapid growers, 12 were M. diernhoferi, 2 M. fortuitum-peregrinum complex, 2 M. vaccae and one M. flavescens. 5. Of the 27 strains of nocardia isolated, 11 strains were N. transvalensis, 5 N. convoluta, 5 N. erythropolis, one N. vaccinii, one N. polychromogens-paraffinae complex and 4 untypable strains of orange-pigmented nocardia spp.

• Journal of Power Electronics
• /
• v.15 no.5
• /
• pp.1402-1408
• /
• 2015

A MOSFET's gate driver based on magnetic coupling is investigated. The gate driver can meet the demands in applications for wide range of duty cycles and high frequency. Fully galvanic isolation can be realized, and no auxiliary supply is needed. The driver is insensitive to the leakage inductor of the isolated transformer. No gate resistor is needed to damp the oscillation, and thus the peak output current of the gate driver can be improved. Design of the driving transformer can also be made more flexible, which helps to improve the isolation voltage between the power stage and the control electronics, and aids to enhance the electromagnetic compatibility. The driver's operation principle is analyzed, and the design method for its key parameters is presented. The performance analysis is validated via experiment. The disadvantages of the traditional magnetic coupling and optical coupling have been conquered through the investigated circuit.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2000.04b
• /
• pp.35-38
• /
• 2000

In this study, the rise throughput and the stability in fabrication of device can be obtained by applying of CMP process to STI structure in 0.l8um semiconductor device. Through reverse moat pattern process, reduced moat density at high moat density, STI CMP process with low selectivity could be to fit polish uniformity between low moat density and high moat density. Because this reason, in-situ motor current end point detection method is not fit to the current EPD technology with the reverse moat pattern. But we use HSS without reverse moat pattern on STI CMP and take end point current sensing signal.[1] To analyze sensing signal and test extracted signal, we can to adjust wafer difference within $110{\AA}$.

• New & Renewable Energy
• /
• v.1 no.2 s.2
• /
• pp.11-18
• /
• 2005

A modular photovoltaic PCS with high-frequency isolation is proposed. The proposed system consists of a SEPIC converter and a full-bridge inverter Using the power slope versus voltage of the PV array, the MPPT controller is proposed that produces a smooth transition to the maximum power point. The dc current of the PV array is estimated without using a dc current sensor The disturbance of the line voltage is detected using a fast sensing technique. Experimental results obtained on a 500W prototype show high performance such as almost unity power factor, $90\%$ power efficiency, $3.6\%$ THD.

• Journal of Applied Biological Chemistry
• /
• v.56 no.3
• /
• pp.137-139
• /
• 2013

Free radical scavengers in the bisdemethoxycurcumin (BDMC), demethoxycurcumin (DMC) and curcumin of turmeric (Curcuma longa) were screened, identified, quantified and isolation using coupled off-line-2,2'-azino-bis(3-ethylbenzthiazoline-6-sulphonic acid) (ABTS) and on-line screening high-performance liquid chromatography (HPLC)-ABTS assay. There was a very small margin of error between the off-line-ABTS method and the on-line screening HPLC-ABTS method.

• Transactions on Electrical and Electronic Materials
• /
• v.17 no.2
• /
• pp.86-91
• /
• 2016

Ever increasing demand for microwave operated applications has cultivated need for high-performance universal systems capable of working on multi-bands. This objective can be realized using Multi-Dielectrics in RF MEMS capacitive switch. In this study, we present a detailed analysis of the effect of various dielectrics on switch performance. The design consists of a capacitive switch and performance is analyzed by changing the dielectric layers beneath the switch. The results are obtained using three different dielectrics including Silicon nitride (7.6), Hafnium dioxide (25) and Titanium oxide (50). Testing of proposed switch yields high isolation (- 87.5 dB) and low insertion loss (- 0.1 dB at 50 GHz) which is substantially better than the conventional switches. The operating bandwidth of the proposed switch (DC to 95 GHz) makes it suitable for wide band microwave applications.