• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.51 no.5
• /
• pp.483-490
• /
• 2006

In order to breed hemp variety with nondrug type adapted to Korea, a total of 44 accessions were introduced from Center for plant breeding and reproduction research (CPRO) In Netherland and evaluated for plant growth characteristics and contents of cannabinoids such as tetrahydrocannbinol (THC), cannabidiol (CBD), Cannabinol (CBN) in Korean climatical and geographical condition. 1. In Korean geographical position which latitude is $34^{\circ}N$, days to flowering and stem length were shorter than in Netherlands which latitude is $52^{\circ}N$. But THC content was not shown significant difference between two areas. 2. Corrected accessions of hemp were classified into 3 variety groups by cluster analysis and 4 accessions including Korean local variety were not classified into any variety group. 3. Most hemp accessions have low THC contents but were not suitable for fiber production in Korea due to short days to flowering and stem length. 4. Among the introduced accessions, IH3 was suitable for breeding material of fiber hemp with non-drug type because of low THC content and similar days to flowering with Korean local variety.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.10 no.3
• /
• pp.314-320
• /
• 2022

The function of reinforcing fibers used in building materials is to maintain resistance to bending loads and to function for cracking caused by drying shrinkage. High-density fiber-cement composites are mainly used for linear plates and are used to increase bending resistance. Therefore, tensile properties, bonding strength with cement hydrate, alkali resistance, and the like are required. Recently, as the non-combustible performance has been strengthened, a function to minimize the occurrence of sparks during high-temperature heating has been added. Therefore, the use of organic fibers is limited. In this study, a study was conducted to replace polypropylene used as reinforcing fiber with hemp fiber with excellent heat resistance. Hemp fibers have excellent heat resistance, good affinity with cement, and excellent alkali resistance. Based on the total volume of polypropylene fibers used in the existing formulation, the non-combustible performance was compared and evaluated by using hemp fibers instead of the polypropylene fibers, and basic physical properties such as flexural strength were tested. As a result of conducting a non-combustibility and physical property test using hemp fibers with a fiber length of 7 mm using 2 % and 3 % by weight, it was found that there is no remaining time of the flame, and the flexural strength can be secured at 95 % level of the existing polypropylene fiber.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2011.04a
• /
• pp.293-300
• /
• 2011

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2011.10a
• /
• pp.389-395
• /
• 2011

• Journal of the Korean Society of Costume
• /
• v.58 no.10
• /
• pp.164-172
• /
• 2008

Soochonri tombs are assumed to be of the Baekje Kingdom in the early 5th century. We have examined 12 artifacts and 24 textiles in the four tombs. Along with hemp textiles, silk and embroidery threads were found In the Soochonri tombs. Within the hemp textiles both hemp and ramie were made using s-twist threads and the thread count distribution is calculated to be $8.5{\sim}15.5/cm^2$. Taffeta, one of the silk, can be categorized in to four types. First, the plain woven silk was made with warp and weft of the same thickness. The rates of thread count are also similar. Secondly the warp and weft are of the same thickness but has more spaces between threads. Third, the type of warp and weft is different in thickness, the thicker thread woven in the same direction. Lastly, a textile was woven with spaces the same as the width of the reed mark in every two warps. There were five compound weave found. Among them one was made with non-twisted thread for warp and s-twist thread for weft. One plain braiding with apparent spaces between threads were found. All three of the twining were made with wefts thicker than warps, barely showing the warps as a result. Textiles of the Soochonri tombs are the oldest of the Baekje Kingdom studied by far and therefore important artifacts of the Baekje Kingdom. These textiles are similar to those found in the King Muryeong's Tomb and tombs of Gaya and Shilla.

• Journal of the Korean Society of Costume
• /
• v.57 no.1 s.110
• /
• pp.93-104
• /
• 2007

This study is considered about the fabrics culture of Baekje Period by analyzing the fabrics pieces at a inner part of the It-bronze shoes found at the tomb of King Mu-ryeong in 1971 AD. The analysis methods of the fabrics pieces are a photographing of fabrics pieces surface by VMS, Digital camera(Nikon Coolpix 995) and the analysis of samples by SEM, XRD and FT-IR. It is assumed this fabrics pieces are the inner shoes, which consisted of compound woven silk at outward, some of tabby and a hemp at inward and the braids for decoration, of the gilt-bronze shoes. The features are as follows. 1. All of compound woven silk are the warp-faced compound tabby of plain fabrics and the density is various from high to low one. Compound woven silk which is attached the gilt-bronze shoes of the tomb of King Mu-ryeong weaves in high density by a thick thread. The fibers material of compound woven silk prove to be a silk by the analysis of wrap samples by SEM, XRD and FT-IR. 2. Tabby are excavated under the condition which attached on reverse side of compound woven silk. Those ran classify two types. First, the fine weaving by high density of wrap and weft. Second, the loose warp weaving with one warp and some of weft. 3. Hemp is almost ramie by SEM analysis and the density is different. Ramie which supposed to be attached Guem has the very low density. In addition to, Ramie pieces, excavated in condition and weaved finely, proved the conspicuous weaving skill in Baekje period. 4. Various kinds of braid are found and these ones classifies by fiber material and entwining way. Two types out of these are the one of silk thread, decorates the upper, middle parts of compound woven silk shoes and the other of hemp thread, decorates the lower parts.

• Journal of the Korean Society of Costume
• /
• v.62 no.7
• /
• pp.41-53
• /
• 2012

Hwangnamdaechong Tomb (The 98th tomb in Hwangnam-dong), one of the royal tombs located around the area of royal tomb of King Michu in Hwangnam-dong, Gyeongju, is currently designated as Historic Site No. 40. It is assumed that Hwangnamdaechong Tomb is a royal tomb of the early 5th century. This study aims to examine the fabric relics excavated from Hwangdamdawchong Tomb and currently housed in Gyeongju National Research Institute of Cultural Heritage. The types of fabrics excavated from Hwangdamdawchong Tomb include plain silk, warp-faced compound woven silk, and hemp cloth. Most of these fabrics are adhered to metal products that became rusty. Plain silk found in Hwangnamdaechong Tomb can be divided into four types by its weaving method. Geum excavated from Hwangnamdaechong Tomb is typical Gyeong Geum that uses colored warp for its base and pattern. It is plain Gyeong Geum that the binding weft and warp is plain woven. Although there are a lot of Gyeong Geum fabrics whose colors are hard to define due to yellowing after long years, there are still many fabrics whose color such as purple, red, blue, and green can be identified. As literatures have shown that p cloth as well as silk were frequently woven during Silla dynasty, tremendous amount of hemp cloth was excavated. Most of the hemp cloth has S-twist in the warp and 8-12 seung degree of delicacy.

• Korean Journal of Heritage: History & Science
• /
• v.52 no.4
• /
• pp.170-183
• /
• 2019

Fiber scutching refers to the process of extracting fibers from plants by separating or extracting fibers from the raw materials. As the definition of the term implies, the "Fiber Scutching" is performed on plants with advanced bast fiber as the primary material processing technique performed on plant materials. Some of the most popular phosphorus plants are ramie, hemp, flax, and the paper mulberry, which have a long history of cultivation and a wide range of distribution, making them very universal as a material supporting human life and culture. This study was described in Oju-yeonmunjangjeon-sango but was designed to re-examine the method of breaking dried stalks, which is currently unused in Korea, to examine the feasibility and characteristics of the technology. As a result of sampling and experimenting with hemp bast using the method recorded in the literature, hemp fiber was actually produced. The criteria for removing the shell from the hemp stem were the degree of discoloration and drying, and only when the stalk was completely discolored to yellow could segregation of the stalk from the shell be performed. The amount of sunlight and temperature were conditions that accelerated drying. However, if exposed for a long time, it is confirmed that hemp bast will be in a suitable condition to process, regardless of the amount of sunlight and temperature. 'Breaking of dried stalks', which utilizes the physical power of 'threshing with a flail' is considered a core process of the fiber scutching technique in 'Yukjin' in Hamgyeong-do. The bark and the core of the hemp were separated by tapping, the bast was thinly split, and the shell was peeled off, making it suitable for collecting with thread. The method of collecting the fibers by applying physical power causes downing on the fibers, which is to be generally avoided in the manufacture of bast fabric woven hemp or ramie. However, Hamgyeong-do's fiber scutching method seems to have applied this principle to the method of making fragile fabrics by using it in reverse. This method is distinct from the steaming or boiling of the stalks' in Andong, Korea, and it is similar to the Western method of spinning fabrics.

• Journal of the Korean Society of Costume
• /
• v.59 no.6
• /
• pp.118-125
• /
• 2009

Goryeong Jeesandong tombs No.73 from the 5th century located in Gyeongsangbookdo is the most representative remains of the Daegaya. They were excavated and examined by the Daedong Research Center for Cultural Properties. In this study, the textiles in the Goryeong Jeesandong tomb No.73 is identified and their features are examined through scientific analysis. Due to the fact that the remains were not treated for preservation, we were able to observe many samples under the microscope. Within the hemp textiles both hemp and ramie were made using s-twist threads and the thread count distribution is calculated to be 8.0${\sim}$20.0/$cm^2$. Among the silk, the taffeta was categorized into five types. First, there was plain woven silk which the thickness of the warp and the weft is the same and their rate of threadcount was the same. The second type was thin tabby which is spacious between threads. The third kind was woven by warp and weft which had very different thickness. The fourth type used two threads for each warp. The fifth kind used two threads for the warp threads and used thick threads for the weft for a modified plain weave, and it is the first of its kind to be found. Also, there was a compound weave with warp-faced compound weave among silk.

• Proceedings of the Korean Society For Composite Materials Conference
• /
• 2005.04a
• /
• pp.42-45
• /
• 2005

Interfacial evaluation of various combinations of both Flax and Hemp fibers/polypropylene were performed by using micromechanical test and nondestructive acoustic emission (AE). It can be because interfacial adhesion between the natural fiber surface and matrix plays an important role in controlling the overall mechanical properties of polymer composite materials by transferring the stress from the matrix to the fiber. It is necessary to characterize the interphase and the level of adhesion to understand the performance of the composites properly. Microfailure mechanism of single Flax fiber bundles were investigated using the combination of single fiber tensile test and nondestructive acoustic emission. Microfailure modes of the different natural fiber/polypropylene systems were observed using optical microscope and determined indirectly by AE and their FFT analysis.