• The Korean Journal of Soil Zoology
• /
• v.4 no.2
• /
• pp.89-100
• /
• 1999

Four new and a known spacies of the order Mononchida were described and illustrated. Iotonchus obtusus sp. n. was 2.8 mm long, a=33, b=4.2, c=61, V=68%, buccal cavity=61${\times}$45 mm, and is characterized by having basally situated dorsal tooth, presence of vulval papillae and in having short, hemispherical tail with thick cuticle at terminus. Miconchus vulvapapillatum sp. . was 2.7-3.6 mm long, a=29-36, b=4.1-4.5, c=18.4-21, V=65-69%, buccal cavity=53-61${\times}$29-33 mm, spicules=132-137 mm, ventromedian supplements 28-31, and was characterized by having 5-8 pre- and post vulval papillae in contiguous series, and three pairs of vulval glands. Clarkus koreanus sp. n. was 1.1-1.3 mm long, a=27.5-28.8, b=3.5-3.9, c=12-14.5, V=60-64%, buccal cavity=24-28${\times}$13.5-15 mm, and was characterized by well offset lip region, amphids situated well below to dorsal tooth apex, and vulva elevated, with vulval flap. Coomansus ulsani sp. n. was 1.2-1.5 mm long, a=23.5-26, b=3.4-3.8, c=13.6-14.8, V=65-68%, buccal cavity=36-39${\times}$21-23 mm and was characterized by well offset lip region and a thin longitudinal ridge on vertical walls of stoma.

• Conservation Science in Museum
• /
• v.26
• /
• pp.83-182
• /
• 2021

This study summarized the results of the conservation treatment and investigation on the production method of the golden crown (Treasure No. 339) excavated from Tomb No. 129 (also known as Seobongchong Tomb) in Noseo-dong, Gyeongju-si, Gyeongsangbuk-do Province. The golden crown from Seobongchong Tomb was discovered during the excavations conducted by the Museum of the Government-General of Korea in 1926 during the Japanese colonial era. It is currently in the collection of the National Museum of Korea. A total of six Silla golden crowns have survived in Korea, among which the crown from Seobongchong Tomb is the only example with a dome-shaped hemispherical decoration attached with a bird ornament while otherwise showing the typical features of Silla crowns. The crown had been repaired following its excavation using metallic materials and adhesives, but due to the partial deformation and damage brought about by the repair materials, it required further conservation treatment. This article describes in detail the overall process of the conservation treatment and the restoration of the original form of the golden crown from Seobongchong Tomb, particularly the method of reinforcing the joints to secure the stability of the crown. It presents the characteristics of the crown's production as revealed in the investigation during the conservation treatment, and further analyzes the relationship of this crown from Seobongchong Tomb with other Silla crowns through a comparison of their production techniques. The investigation revealed that the crown was primarily decorated with golden sequins at the time of its production. At a later point some of the sequins in the upright ornament were replaced with comma-shaped jade beads and additional comma-shaped jade beads were added to the headband. In order to determine if such modifications to the decoration had occurred with other Silla crowns, the decoration of the six extant Silla golden crowns were investigated. The crown from Cheonmachong Tomb features traces of this same modification to the decoration and possesses other similarities with the crown from Seobongchong Tomb.

• Journal of Mushroom
• /
• v.21 no.3
• /
• pp.167-172
• /
• 2023

A new brown variety of Flammulina velutipes, referred to as 'Asakgold,' was bred by crossing two monokaryons isolated from the "Geumhyang2ho" and "Garlmoe" varieties. The pileus color of the new variety is light brown and its shape is hemispherical. During bottle cultivation, the period necessary for mycelial growth was 40 days, 9 days for primordia formation and 15 days for fruiting body growth. The total cultivation period was 64 days, which was similar to that of the control variety "Yeoreumhyang1ho." The pileus of the new variety was similar and the stipe was thinner and longer than that of the control. The number of valid stipes per bottle was 495, which was 37 % higher than that of the control (362), and the yield was 214 g, 16 % higher than that of the control (185 g). The β-glucan content was 28.69 %, which was observed to be 1.6 times more than that of the control.

• Journal of Korean Society of Water and Wastewater
• /
• v.37 no.4
• /
• pp.203-214
• /
• 2023

In this study, the physical properties and fracture characteristics according to the tensile load are evaluated on the materials of the polymeric filler and carbon fiber-based composite sleeve technique. The polymeric filler and the composite sleeve technique are applied to areas where the pipe body thickness is reduced due to corrosion in large-diameter water pipes. First, the tensile strength of the polymeric filler was 161.48~240.43 kg_f/cm², and the tensile strength of the polyurea polymeric filler was relatively higher than that of the epoxy. However, the tensile strength of the polymeric filler is relatively very low compared to ductile cast iron pipes(4,300 kg_f/cm²<) or steel pipes(4,100 kg_f/cm²). Second, the tensile strength of glass fiber, which is mainly used in composite sleeves, is 3,887.0 kg_f/cm², and that of carbon fiber is up to 5,922.5 kg_f/cm². The tensile strengths of glass and carbon fiber are higher than ductile cast iron pipe or steel pipe. Third, when reinforcing the hemispherical simulated corrosion shape of the ductile cast iron pipe and the steel pipe with a polymeric filler, there was an effect of increasing the ultimate tensile load by 1.04 to 1.06 times, but the ultimate load was 37.7 to 53.7% compared to the ductile cast iron or steel specimen without corrosion damage. It was found that the effect on the reinforcement of the corrosion damaged part was insignificant. Fourth, the composite sleeve using carbon fiber showed an ultimate load of 1.10(0.61T, 1,821.0 kg_f) and 1.02(0.60T, 2,290.7 kg_f) times higher than the ductile cast iron pipe(1,657.83 kg_f) and steel pipe(2,236.8 kg_f), respectively. When using a composite sleeve such as fiber, the corrosion damage part of large-diameter water pipes can be reinforced with same level as the original pipe, and the supply stability can be secured through accident prevention.

• Journal of Mushroom
• /
• v.22 no.3
• /
• pp.107-111
• /
• 2024

A new oak mushroom cultivar 'K815' was bred from monokaryotic strains of 'Jadam-2' and 'LE191732-118'. The optimal temperature for mycelial growth of 'K815' was 25℃, and the temperature for primordia formation and fruiting body development was 15~20℃. The fruiting body morphology is hemispherical and the fruiting form is sporadic. Total cultivation period of the new cultivar, from inoculation to its first harvest, was 133 days, which was 3 days longer than control cultivar 'Jadam' (129 days), with 32 days for spawn running, 89 days for browning, 4 days for primordia formation, and 8 days for fruiting body development. In the fruiting body, the thickness and diameter of pileus of the new cultivar were 32.2 mm and 58.3mm, respectively, and the length of stipe was 35.6 mm. Compared to the control cultivar ('Jadam', 'L808'), the pileus of the new cultivar was thicker and smaller and the length of stipe was shorter. The total number of fruiting bodies of 'K815' was 58.9, which was higher than the control varieties and total yield of 2 crop cycle of 'K815' was 580 g (per 3 kg substrate), which was similar to the control variety.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.31 no.3
• /
• pp.95-105
• /
• 2013

This study on circular identifying purposes was performed of Youngbeokji space located in Seongnagwon(Scenic Sites No.35). Through the data acquisition of 3D high precision, such as the surrounding terrain of the Youngbeokji. The results of this study is summarized like the following. First, the purpose of the stone structures and structure within the Youngbeokji search is an important clue to find that earlier era will be a prototype. 3D scan method of enforcement is searching the whole structure, including the surrounding terrain and having the easy way. Second, the measurement results are as follows. Department of bedrock surveyed from South to North was measured by 7,665mm. From East to West was measured at 7,326mm. The size of the stone structures, $1,665mm{\times}1,721mm$ in the form of a square. Its interior has a diameter of 1, 664mm of hemispherical form. In the lower portion of the rock masses in the South to the North, has fallen out of the $1,006mm{\times}328mm$ scale traces were discovered. Third, the Youngbeokji recorded in the internal terrain Multiresolution approach. After working with the scanner and scan using the scan data, broadband, to merge. Polygon Data conversion to process was conducted and mash as fine scan data are converted to process data. High resolution photos obtained through the creation of 3D terrain data overlap and the final result. Fourthly, as a result of this action, stone structure West of the waterway back outgoing times oil was confirmed. Bangjiwondo is estimated to be seokji of structure hydroponic facility confirmed will artificially carved in the bedrock. As a result of this and the previous situation of the 1960s could compare data was created. This study provides 3D precision ordnance through the acquisition of the data. Excavations at the circle was able to preserve in perpetuity as digital data. In the future, this data is welcome to take a wide variety of professionals. This is the purpose of this is to establish foundations and conservation management measures will be used. In addition, The new ease of how future research and 3D scan unveiled in the garden has been used in the study expect.

• Journal of Korean Society of Environmental Engineers
• /
• v.27 no.2
• /
• pp.163-169
• /
• 2005

Photocatalytic oxidation of Cu(II)-EDTA has been studied using solar/$TiO_2$ photocatalysis as an energy source. Photocatalysis efficiency on the treatment of Cu(II)-EDTA was investigated using different types of solar collectors as well as by variation of the angles of solar collector solar light intensities, flow rates, and areas of solar collector. effect of $H_2O_2$ and types of $TiO_2$ catalyst on the treatment of Cu(II)-EDTA was also investigated. Removal of Cu(II) and DOC was favorable with a hemispherical collector than with a flat collector Removal of Cu(II) and DOC increased with increasing angles of solar collector up to $38^{\circ}$. Slurry type $TiO_2$ showed four-times higher removal efficiency than immobilized type $TiO_2$. Removal of both Cu(II) and DOC at a clear sky of solar light intensity ranging from 0.372 to $2.265\;mW/cm^2$ was greater than removal at a cloudy day of solar light intensity ranging from 0.038 to $1.129\;mW/cm^2$. From the result of this research that the removal efficiency of Cu(II) and DOC increased as the solar light intensity increased, it can be inferred that quantum yield in the destruction of Cu(II)-EDTA may directly related with the solar light intensity. Removal of Cu(II) increased as increasing the area of solar collector and was similar at lower flow rates white removal of Cu(II) was interfered at higher flow rates. When immobilized $TiO_2$ was used, removal efficiency of Cu(II) increased in the presence of $H_2O_2$ while negligible effect was found in the use of $TiO_2$ slurry.

• Korean Journal of Heritage: History & Science
• /
• v.54 no.4
• /
• pp.192-211
• /
• 2021

In Seongju, Gyengsangbuk-do, the Placenta Chamber (胎室, Taesil) of 18 sons and a son of the crown prince of King Sejong(世宗大王) is located in one place. Taesil refers to the place where the umbilical cord and placenta, which are separated when the baby is born, are placed in a jar made of pottery and stone box and then buried on the ground. The placenta chamber in Seongju has the Buncheong ware (粉靑沙器) cover buried on the ground to protect the baby's placenta. These covers are all hemispherical, with a diameter of more the 20cm. The decorations were made using black and white inlaid techniques only on the outside. The Buncheong ware cover with this shape and pattern has been confirmed only in the placenta chamber in Seongju. This study targets 6 of the Buncheong ware cover whose owners were identified, when and where they were prepared, what the stylistic features and meanings are, and where it was produced. The results of the study are as follows. First, ss a result of reviewing the production background and procurement system of this bowl, it was inferred that it was sourced from Jangheunggo (長興庫) at the central government office, between 1436 and 1439, when the event to bury the placenta of royal members in the ground was the most active. Second, it analyzed the unique features of this cover, such as the shape, pattern, and baked traces. The shape and pattern were compared to the ritual objects contained in the Sejong Silok Oryeui (『世宗實錄』 「五禮」, Five Rites of King Sejong Chronicle) and the lid of the royal placenta jar made in the 15th and 16th centuries. Third, this study suggests that the baking method was based on the shape and location of the traces remaining outside the cover. Finally, the following data were used to estimate the production site: the relationship with the 'Jagiso (磁器所, ceramic workshop) registered in the Sejong Silok Jiriji (『世宗實錄』 「地理志」, Geographical Appendix of King Sejong Chronicle); various records of contribution and dedication about the Buncheong ware made here; and the Buncheong ware and related tools excavated from the kiln site in the area. The place where the Buncheong ware cover was produced is estimated to be the most likely production site for the kiln site in Chunghyo-dong Kiln Site, located in Jeolla-do province by synthesizing the data above.

• Journal of Mushroom
• /
• v.17 no.2
• /
• pp.52-63
• /
• 2019

Agrocybe spp. belongs to the Agaricales order, Bolbitiaceae family, and Agrocybe genus. In Korea, so far, it has been cultivated through bottle cultivation; therefore, this study was conducted for the development of a new cultivar using the bag cultivation method for quantitative improvement. Thirty-three gene resources of Agrocybe spp. were collected and their quantity and characteristics of bag cultivation were examined. Next, 5 kinds of crossing parents were selected based on the cultivation period and shape of the fruit body. Seven strains were selected through 3 cross combinations. The 7 selected strains and the comparative cultivar 'Cham' were cultivated in a bag. As a result, the cultivation period was 49 days for 'JBAC15-1' and 50 days for 'JBAC15-6' which are 4 days and 3 days less than the cultivation period of the comparative cultivar 'Cham'(53 days), respectively. Cultivation periods of other strains except for 'JBAC15-1' and 'JBAC15-1' were longer than that of the comparative cultivar'Cham'. The best ratio of primordia formation among the selected strains was found to be that of 'JBAC15-1' with 96.1% followed by 'JBAC15-6' with 94.5%. These rates were 3.1% and 1.5% higher than the ratio of primordia formation of the comparative cultivar 'Cham', which is found to be 93.0%. The quantity was maximum in the 'JBAC15-1' cultivar with 176.8 g per bag followed by 'JBAC15-6' with 168.7 g per bag. The quantities were 10% and 5% more than the comparative cultivar 'Cham' with 160.7 g per bag. Based on these results, 'JBAC15-1' and 'JBAC15-6', which had shorter cultivation periods and more quantities than the comparative cultivar 'Cham' were finally selected. For the selected strains of 'JBAC15-1' and 'JBAC15-6', mycelial growth was observed to be optimal on PDA medium and the optimum temperature was $27.5^{\circ}C$. The optimum pH was pH 5 for 'JBAC15-1' and pH 6 for 'JBAC15-6'. The color of the pileus of the fruit body was dark brown in 'JBAC15-1' and 'Cham' and light brown in 'JBAC15-6'. The pileus was hemispherical in shape in both 'JBAC15-1' and 'Cham'. However, the colors of the stem were different - light brown in 'JBAC15-1', white in 'JBAC15-6', and ivory in the comparative cultivar 'Cham'.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.23 no.6
• /
• pp.517-534
• /
• 2021

Hydrogen fuel is emerging as an new energy source to replace fossil fuels in that it can solve environmental pollution problems and reduce energy imbalance and cost. Since hydrogen is eco-friendly but highly explosive, there is a high concern about fire and explosion accidents of hydrogen fueled vehicles. In particular, in semi-enclosed spaces such as tunnels, the risk is predicted to increase. Therefore, this study was conducted on the applicability of the equivalent TNT model and the numerical analysis method to evaluate the hydrogen explosion pressure in the tunnel. In comparison and review of the explosion pressure of 6 equivalent TNT models and Weyandt's experimental results, the Henrych equation was found to be the closest with a deviation of 13.6%. As a result of examining the effect of hydrogen tank capacity (52, 72, 156 L) and tunnel cross-section (40.5, 54, 72, 95 m²) on the explosion pressure using numerical analysis, the explosion pressure wave in the tunnel initially it propagates in a hemispherical shape as in open space. Furthermore, when it passes the certain distance it is transformed a plane wave and propagates at a very gradual decay rate. The Henrych equation agrees well with the numerical analysis results in the section where the explosion pressure is rapidly decreasing, but it is significantly underestimated after the explosion pressure wave is transformed into a plane wave. In case of same hydrogen tank capacity, an explosion pressure decreases as the tunnel cross-sectional area increases, and in case of the same cross-sectional area, the explosion pressure increases by about 2.5 times if the hydrogen tank capacity increases from 52 L to 156 L. As a result of the evaluation of the limiting distance affecting the human body, when a 52 L hydrogen tank explodes, the limiting distance to death was estimated to be about 3 m, and the limiting distance to serious injury was estimated to be 28.5~35.8 m.