• The Magazine of the Society of Air-Conditioning and Refrigerating Engineers of Korea
• /
• v.33 no.3
• /
• pp.50-57
• /
• 2004

This article reviews absorption cooling R＆D in Europe from the viewpoint of fundamentals, cycle development and applications. The review contains information on R＆D, predominantly of public projects in the field of sorption cooling. We report on research which is performed in Europe with some stress on Germany. There is progress in fundamentals, thermodynamic cycle design, and also applications. In the fundamentals part the discussion about thermodynamics, working pairs, and heat and mass transfer is reflected. Today's discussion on thermodynamic cycles is not very strong. Main focus is on special solid sorption cycles, compression­sorption hybrids, and open cycles, In the applications part the chilling business is the main issue. Some interest is given to the improvement of efficiency on and the adaptation to low temperature waste heat use, but the stress is on the use of solar energy as heat source. The area of heat pumping for heating purposes is less prominent but not at all negligible. Finally, industrial heat pumping involves the reverse cycle (heat transformer, heat pump type Ⅱ) also, but there is no significant activity.

• Journal of Sensor Science and Technology
• /
• v.32 no.1
• /
• pp.39-43
• /
• 2023

Microscale thermophysical property measurements of liquids have been developed considering the increasing interest in the thermal management of cooling systems and energy storage/transportation systems. To accurately predict the heat transfer performance, information on the thermal conductivity, heat capacity, and density is required. However, a simultaneous analysis of the thermophysical properties of small-volume liquids has rarely been considered. Recently, we proposed a new methodology to simultaneously analyze the aforementioned three intrinsic properties using heater-integrated fluidic resonators (HFRs) in an atmospheric pressure environment comprising a microchannel, resistive heater/thermometer, and mechanical resonator. Typically, the thermal conductivity and volumetric heat capacity are measured based on a temperature response resulting from heating using a resistive thermometer, and the specific heat capacity can be obtained from the volumetric heat capacity by using a resonance densitometer. In this study, we analyze methods to improve the thermophysical property measurement performance using HFRs, focusing on the effect of the ambience around the sensor. The analytical method is validated using a numerical analysis, whose results agree well with preliminary experimental results. In a vacuum environment, the thermal conductivity measurement performance is enhanced, except for the thermal conductivity range of most gases, and the sensitivity of the specific heat capacity measurement is enhanced owing to an increase in the time constant.

• Korean Journal of Medicinal Crop Science
• /
• v.15 no.4
• /
• pp.256-260
• /
• 2007

Year-round cultivation of a monocarpic plant Orostachys japonicus should be possible in case to controlling floret flowering. To give some information on its year-round cultivation, this study was carried out to examine the effect of night-break treatment time (June 10, Aug. 25) on its growth, morphological characters, and flowering. Night-break treatment of 2 hours at midnight were done since Aug. 25 and heating were made under $20^{\circ}C$ Samples were taken every 4 weeks from Aug. 25. Growth, morphological and flowering related characters were measured from each sample until March 9. Plant height, inflorescence length, number of leaves including bracts and stem diameter were greater in the earlier treatment than in the later one. Leaves and bracts, floret, stem, root, shoot and total dry weights showed the same response as plant height did to the night-break treatment time. Florets were more formed in the earlier treatment than in the later treatment in which they were flowered only on March 9, meaning that its year-round cultivation should be possible under night-break treatment before bolting and heating during winter season.

• Journal of Korean Society for Atmospheric Environment
• /
• v.23 no.1
• /
• pp.50-63
• /
• 2007

The development of domestic plant specific emission factors is very important to estimate reliable national emissions management. This study, for the reason, was carried out to obtain advances emission factor for Carbon Dioxide ($CO_2$) by source-specific emission tests from the iron and steel industry sector which is well known as one of the major sources of greenhouse gases ($CO_2$). Emission factors estimated in this study were compared with those of IPCC for evaluation and they were found to be of similar level in the case of $CO_2$. There was no good information available on $CO_2$ plant specific emission factors from the iron and steel industry in Korea so far. The major emission sources of $CO_2$ examined from the iron and steel manufacturing precesses were a hot blast stove, coke oven, sintering furnace, electric arc furnace, heating furnace, and so on. In this study, the concentration of $CO_2$ from the hot blast stove process was the highest among all processes. The $CO_2$ emission factors for a ton of Steel and Iron products (using B-C oil) were estimated to be 0.315 $CO_2$ tonne (by Tier 3 method) and 4.89 $CO_2$ tonne. In addition, emission factor of $CO_2$ for heating furnace process was the highest among all process. Emission factors estimated in this study were compared with those of IPCC for evaluation and they were found to be of similar level in the case of $CO_2$.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.7 no.4
• /
• pp.213-218
• /
• 2009

Electrowinning process recovers uranium with actinide elements from spent fuels and is a key step in the Pyroprocessing because of proliferation resistance. An analysis of heat transfer of the Electrowinning cell was conducted to develop basic tool for designing engineering-scale Electrowinner. For the calculation of the heat transfer, ANSYS CFX commercial code was adapted. As a result of the calculation, the vertical Heating Zone length had great effect upon temperature of LiCl-KCl eutectic salt. To maintain constant temperature in the salt, the Heating Zone length should be three times longer than the height of the salt. However, the argon and salt temperatures were barely affected by the Cooling Zone length. The temperature under the Cell cover was mainly influenced by the number of the cooling plates. When the cooling plates were installed more than the number of 5, temperature under the cover was maintained below $250^{\circ}C$. These temperature properties had similar tendency toward the temperature of the Cell which was measured from experiments, Simulated heat transfer information from this study could be used to design engineering-scale Electrowinner.

• Journal of Navigation and Port Research
• /
• v.35 no.1
• /
• pp.57-62
• /
• 2011

On the view point of renewable energies as energy sources of district heating and cooling plant, the purpose of this study is to develop, classify and map the 500m${\times}$500m mesh, of which is treated as normal size in DHC regulations for evaluation process. Followings are the results. Various building and geographical informations including 13 districts and 108 counties are re-defined to create 500m${\times}$500m meshes, and it is find out that 3,289 meshes among 8,463 meshes have meaningful floor areas. Only 59 meshes(1.8%) are evaluated as mesh which has more than 50% of building volume ratio per mesh. 5 clusters classified by principal analysis and cluster analysis with building needs' characteristics are defined. Gwang-an Dong is representative of cluster 1 characterized as commercial area, and the cluster 4, 5 which has mainly residential needs are distributed in Yong-ho dong. Because there are a lot of cluster 3 meshes, which has complex needs area based on residential, cluster 3 could be defined as representative of Busan metropolitan city.

• Journal of the East Asian Society of Dietary Life
• /
• v.23 no.5
• /
• pp.613-619
• /
• 2013

Konjac gel is known as a low calorie food, because the main component is water. Mugwort has been used for food and medicine for a long time due to itsfunctional property, which contains a lot of vitamins and minerals. Therefore, konjac noodle-added mugwort was prepared. The konjac gel was made by from a centrifuge after adding water, alkali and mugwort power in konjac flour. The centrifuge was used to remove air in the gel. After centrifuging by heating the gel in boiling water for one hour, konjac noodle was made by pressing using a flat heating press. The results are as follows. In the drying process of mugwort freeze drying after blanching in 1% $NaHCO_3$ solution is better than other drying methods. The physical properties (hardness, elasticity, cohesiveness, gumminess) of konjac gel were measured with a Rheometer. The optimum processing conditions were decided by these measured values. The optimum condition of making konjac gel is 9% concentration of konjac flour, a ph of 12.0, $Na_3PO_4$ coagulant and 1.5% concentration of mugwort power in konjac flour.

• Fire Science and Engineering
• /
• v.34 no.1
• /
• pp.11-17
• /
• 2020

As performance-based design (PBD) has a direct impact on evacuation safety assessments, designing fire scenarios based on real fire tests is essential. To improve the reliability of the PBD for fire safety in multiplexes, information on fire behavior, such as heat release rate (HRR) and fire spread rate, are provided in this study by conducting a standard fabric flammability test. To this end, several chairs were arranged in a pattern that resembled a theater-style seating. The peak HRR and heating value per unit mass for each chair ranged from 415 kW to 988 kW and 15.2 MJ/kg to 23.8 MJ/kg, respectively. The heating values per unit mass of the new and old chairs were 23.6 MJ/kg and 16.7 MJ/kg, respectively. As the quantity of plastic and cushioning materials in the new chairs was more than that of the old ones, the new chairs were more vulnerable to fire hazards. Furthermore, when the chairs were arranged in a line, the fire spread rate was observed to be 0.39-0.42 m/min, regardless of the ignition location. Finally, a fire growth curve showing the peak HRR and fire spread rate was also demonstrated.

• Journal of Families and Better Life
• /
• v.28 no.1
• /
• pp.131-143
• /
• 2010

The purpose of this study is to understand the living culture of transnational married women and to analyze the out door play of children in their hometown. The data was collected through observation from 27th June to 7th July 2008 in Jian, Jilin Province China. The children's play and lifestyles were observed, and data pertaining to the culture of the people were collected by a teacher and staff. We also visited the residents for housing information. The results are given below. 1. They dressed in Korean clothes on festive days and the boys put on a hood. They had eating habits which included cooking for themselves or buying semi-manufactured goods but did not use, instant food. The housing habits involved a combination of cooking and heating by Korean floor heating system(Ondol). They utilized outdoor space to grow vegetables. Those with a fulltime job(teacher) preferred to live in an apartment but an apartment was too expensive. Public utility charges and traffic expenses were cheap. 2. The main festive days are the lunar New Year's Day and Chuseok. The children returned home and enjoyed the festive day with their parents. The language used are Korean language and Chinese. Some Korean words and phrases in Jian Joseonjok have different meanings as compared to how they are used in Korea. A capping ceremony did not to celebrate becoming an adult from an adolescent. Couples performed a wedding ceremony at a wedding hall attended by their parents and invited relatives from both families. The relatives gave the couple a wedding gift. They did not go on a wedding trip as it was not affordable but instead spent their wedding night at a hotel in this culture. When someone dies, they bury the body after cremation. They perform a memorial service for three years on the birthday of the departed. They have a banquet on the 60th birthdays with their relatives and neighbours and are typically presented with a carp for longevity. 3. They understand capitalism and therefore send their children to school to improve their social position. The Korean and Chinese languages are required subjects in school. The students choose a second language(English or Russian). They prefer English class but at the time of this study an English class was not offered at the school in Jian Joseonjok. Therefore the children entered a Chinese school. 4. The children play outdoor games such as Y$\acute{a}$o J$\grave{i}\bar{a}$(要家), X$\grave{i}$ang g$\grave{i}$(象棋), T$\grave{i}\grave{a}$o p$\acute{i}$ j$\grave{i}$n(r)(跳皮節), D$\grave{o}$uch ing g$\grave{u}$n 凍冷根, B$\bar{e}$i B$\bar{e}$i 背背, and soccer. They play games according to the season.

• Journal of Sensor Science and Technology
• /
• v.12 no.3
• /
• pp.139-148
• /
• 2003

$LiPO_3$ glass scintillators were fabricated, and lanthanides(except Pm) oxides or chlorides were used as an activator. For the fabrication of $LiPO_3$ glasses, optimum heating conditions were obtained, and the photoluminescence of the glasses was measured by the monochromator. For the best transparency of the glass samples, optimum heating temperature and time are $950^{\circ}C$ and 90 min, respectively. It was found that Pr, Nd, Gd, Ho, Er, Tm, Yb and Lu do not work as activator; emission spectrums of samples with them were equal to those of samples without activators. In the case of samples with Europium, the peaks of emission spectrum of $Eu^{2+}$ and $Eu^{3+}$ were 420 nm and 620 nm respectively. And samples with $Ce^{3+}$ were about 380 nm, and $Tb^{3+}$ were about 550 nm. Glass scintillators with $Be^{3+}$, $Eu^{2+}$, and $Ce^{3+}$ were found to be more applicable to neutron detection. The result of neutron detection by Ra-Be sources showed that $Ce^{3+}$ was found to be the best activator of $LiPO_3$.