• 한국구조물진단유지관리공학회 논문집
• /
• 제26권6호
• /
• pp.33-38
• /
• 2022

지속적인 폭염이 발생함에 따라 협착으로 인한 포장 솟음이나 교량 신축이음 파손 사례가 다수 발견되고 있다. 특히 교량에서의 협착은 구조물의 안전성을 위협하거나 장기적인 내구성을 저하시킬 수 있는 중요한 문제이다. 본 논문에서는 교량에 협착이 발생할 경우에 대한 구조해석 방법을 제시하고, 대표형식 교량에 대한 협착상태 구조해석을 수행하여 그 거동 영향을 확인하였다. 대표교량은 상부구조의 경우 콘크리트교와 강교, 하부구조의 경우 직접기초와 말뚝기초로 구분하여 선정하였으며, 측방유동압, 알칼리 골재반응에 의한 포장팽창, 뒤채움재의 Creep로 인한 침하를 협착에 대한 추가적인 하중으로 고려하였다. 구조해석 결과를 실제 측정된 유간 데이터와 비교하여 구조해석 방법을 검증하였다. 또한 협착에 의한 거동 영향 분석을 수행하여 축력이 증가함에 따른 상부구조의 형식별 안전율 변화 경향을 확인하였다.

• 한국태양에너지학회 논문집
• /
• 제31권3호
• /
• pp.95-100
• /
• 2011

Currently, office buildings in Korea tend to adopt as their outer wall the curtain wall structure which can be easily constructed and has beautiful external appearance as well. However, the problem is that the curtain wall structure does not have a uniform composition unlike the wall of existing reinforced concrete structures and has a frame made of metal with high heat conduction. Therefore, it is expected that the structure will be highly influenced by the thermal bridge. Thereupon, this study analyzes how to set up the composition of the wall system and heat transmission rate in consideration of the thermal characteristics of the curtain wall structure and applies it in practice by simulation in order to propose a guideline for the energy simulation method of the curtain wall structure and analyze its differences from existing simulation methods.

• Computers and Concrete
• /
• 제20권5호
• /
• pp.529-537
• /
• 2017

Excessively elevated temperature can lead to cracks in prestressed concrete (PC) continuous bridge with box girder on the pier top at cement hydration age. This paper presents a case study for evaluating the behavior of PC box girder during the early hydration age using a two-stage computational model, in the form of computer program ANSYS, namely, 3-D temperature evaluation and determination of mechanical response in PC box girders. A numerical model considering time-dependent wind speed and ambient temperature in ANSYS for tracing the thermal and mechanical response of box girder is developed. The predicted results were compared to show good agreement with the measured data from the PC box girder of the Zhaoshi Bridge in China. Then, based on the validated numerical model three parameters were incorporated to analyze the evolution of the temperature and stress within box girder caused by cement hydration heat. The results of case study indicate that the wind speed can change the degradation history of temperature and stress and reduce peak value of them. The initial casting temperature of concrete is the most significant parameter which controls cracking of PC box girder on pier top at cement hydration age. Increasing the curing temperature is detrimental to prevent cracking.

• 한국마린엔지니어링학회:학술대회논문집
• /
• 한국마린엔지니어링학회 2000년도 추계학술대회 논문집(Proceeding of the KOSME 2000 Autumn Annual Meeting)
• /
• pp.21-29
• /
• 2000

본 논문의 목적은 허니콤 코어로 보강된 샌드위치 항공기 구조물 제작 시 오토클레이브 성형 과정 중에 발생되는 결함의 원인을 분석하고, 이를 최소화시키는 것이 다 결과적으로 금형의 곡률, 코어 두께, 저글 높이 등과 같은 구조물 및 금형의 형상과 오토클레이브 경화 조건인 승온율, 승압율 등이 Core movement, Core wrinkle, core depression 및 bridge phenomenon 등의 결함 발생에 큰 영향을 미치고 있음을 알 수 있었다.

• 열처리공학회지
• /
• 제19권3호
• /
• pp.163-169
• /
• 2006

Fretting is a kind of surface degradation mechanism observed in mechanical components and structures. The fretting damage decreases into 50-70% of the plain fatigue strength. The connecting rod for automobile has been used in special environments and various loading conditions. Failure of connecting rod in automotive engine may cause catastrophic situation. In this study, we investigated the fatigue characteristic of connecting rod material for an automobile. Fatigue life is defined as the number of cyclic stress to failure by regular cyclic stress. Fatigue life of C70S6 specimen was obtained from 134,000 to 147,000 cycles. Fatigue limit showed 432MPa by normal fatigue test. The other hands, it was 96MPa in the case of fretting fatigue test. It was extremely lower than that of a normal fatigue test. From observation of fracture surface, it was confirmed that the fatigue crack was initiated at the boundary of a specimen and bridge pad.

• 구강회복응용과학지
• /
• 제16권1호
• /
• pp.1-11
• /
• 2000

Dental temporary resin should have adequate strength and similar esthetics as natural teeth. Recently esthetics has become a high priority in clinical dentistry. Thus the evaluation of color stability of dental temporary resin has become an important part in dental research. The purpose of this study was to evaluate the difference in color stability of 3 resins($Snap^{(R)}$, Temporary bridge $resin^{(R)}$, Trim $II^{(R)}$) according to polymerizing methods and stainning. The resins were divided into groups by 2 types of polymerizing methods ( air or pressure and heat curing) The resins were dyed with coffee, chlorhexidine and artificial saliva and then the color stability was evaluated with a spectrophotometer(CM-503i, Minolta, Japan). The results were as follows ; 1. In the color stability according to polymerizing method, pressure and heat polymerizing method was higher than air polymerizing method. 2. The color stability according to staining fluid decreased in the order of I, II, III group, there was significant difference among the groups of staining fluid. 3. The color stability according to resins decreased in the order of $Snap^{(R)}$, Trim $II^{(R)}$, Temporary Bridge $resin^{(R)}$, The $Snap^{(R)}$ resin was highest color stability, there was significant difference among the 3 resins.

• 대한의용생체공학회:의공학회지
• /
• 제22권4호
• /
• pp.349-358
• /
• 2001

A novel electro-mechanical implantable ventricular assist system is developed as a bridge to transplantation or recovery for patients with end-stage heart failure. The developed system is composed of an implanted blood pump, an external monitoring system which stores data, and a wearable system including a portable external driver and a portable power supply system. The blood pump is designed to be implanted into the left upper abdominal space and provides blood flow from the left ventricular apex to the aorta. The pulsatile blood flow is generated by a double cylindrical cam. There was mo excessive heat emission from the blood pump into the temperature-controlled chamber in the heat test and no stagnated flow within the blood sac by the observation in the flow visualization test. Animal experiments were performed using sheep and calves. The maximum assist flow rate reached 7.85L/min in the animal experiment. The evaluation results showed that the developed system was feasible for the implantable ventricular assist system. The long-term in vitro durability test and mid-term in vivo experiments are in progress and mow the modified next model is under development.

• 한국구조물진단유지관리공학회 논문집
• /
• 제17권3호
• /
• pp.145-152
• /
• 2013

본 논문은 1990년대~2011년 시공 중이었던 건축물의 커튼월의 단열성을 평가하기 위하여 내외 표면 온도를 측정하여 부위별 온도 차이를 분석하였다. 유리면이나 단열층이 있는 표면보다 커튼월의 프레임 (멀리온 및 트랜섬)의 온도는 동절기 외부 평면의 경우 $6^{\circ}C{\sim}10^{\circ}C$ 정도 높게 나타났다. 또한, 같은 프레임에서도 앵커유닛이 있는 부위가 다른 프레임보다 $2^{\circ}C{\sim}3^{\circ}C$ 더 높게 나타나 보다 큰 열 손실이 일어나고 있는 것으로 나타났다.

• Journal of the Korean Wood Science and Technology
• /
• 제41권6호
• /
• pp.515-527
• /
• 2013

국내에서 주로 사용되고 있는 건물에너지 성능평가 시뮬레이션 마다 상이한 재료의 열전도율로 평가 되고 있음이 파악되었다. 시뮬레이션을 통한 정확한 건물에너지부하를 평가하기 위하여, 각 시뮬레이션에서 목조건축물의 스터드로 사용되고 있는 목재의 열전도율을 확인하고, 이에 따른 벽체의 열관류율과 부재 접합부위에서의 선형열교 차이를 연구하였다. 각 시뮬레이션은 동일 수종에 대해 상이한 열전도율을 채택 후, 각 시뮬레이션에서 추출한 열전도율 간의 차이가 가장 상이한 소나무의 열전도율을 스터드에 적용하였다. 시뮬레이션 간 지붕, 벽체, 지면 슬래브의 열관류율 중 최대오차는 $0.023W/m^2{\cdot}K$이었으며, 지붕의 서까래 접합부, 지붕-벽체 접합부, 지면슬래브-벽체 접합부 중 최대 선형열교 오차는 $0.025W/m{\cdot}K$이었다. 또한, HEAT2 정상상태전열해석 프로그램을 활용하여 선형열교 및 벽체의 온도변화에 대한 전열해석 이미지를 분석하였다. 구조체에 온도 분포를 선으로 표시하여 단열이 부족한 곳에서는 온도선이 급격하게 변하는 것이 확인되었고, 온도선이 급격하게 변하는 부위에서는 다른 곳보다 온도가 낮으며, 다른 구조체 부분보다 더 많은 열류가 손실됨이 확인되었다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2000년도 봄 학술발표회 논문집
• /
• pp.291-296
• /
• 2000

The crack of concrete induced by the heat of hydration is s serious problem, particularly in concrete structures such as bridge piers. thick walls, box type walls, mat-slab of nuclear reactor building, dams of foundations of high rise buildings, etc. As a result of the temperature rise and restriction condition of foundation, the thermal stress which way induce the cracks can occur. Therefore the various techniques of the thermal stress control in massive concrete have been widely used. One of them is prediction of the thermal stress, besides low-heat cement which mitigates the temperature rise, design change which consider steel bar reinforcement, operation control and so on. In this study, firstly it introduce the thermal cracks control technique by employing low-heat cement concrete, thermal stress analysis, Secondly it shows the application of the cracks control technique like the bottom of No.15,16 Underground LNG Tank in Inchon.