• Journal of the Korean Society of Radiology
• /
• v.15 no.7
• /
• pp.965-973
• /
• 2021

Since radiation therapy is irradiated with high-energy X-rays in a variety of at least 20 Gy to 80 Gy, a high dose is administered to the local area where the tumor is located, and various side effects of some normal tissues are expected. Currently, in clinical practice, lead, a representative material, is used as an effort to shield normal tissues, but lead is classified as a heavy metal harmful to the human body, and a large amount of skin contact can cause poisoning. Therefore, this study intends to manufacture a measurement sheet that can compensate for the limitations of lead using the materials Tungsten, Brass, and Copper of the 3D printer of the FDM (Fused Deposition Modeling) method and to investigate the penetration performance. Tungsten mixed filament transmission measurement sheet size was 70 × 70 mm and thickness 1, 2, 4 mm using a 3D printer, and a linear accelerator (TrueBeam STx, S/N: 1187) was measured by irradiating 100 MU at SSD 100 cm and 5 cm in water using a water phantom, an ion chamber (FC-65G), and an elcetrometer (PTW UNIDOSE), and the permeability was evaluated. As a result of increasing the measurement sheet of each material by 1 mm, in the case of Tungsten sheet at 3.8 to 3.9 cm in 6 MV, the thickness of the lead shielding body was thinner than 6.5 cm, and in case of Tungsten sheet at 4.5 to 4.6 cm in 15 MV. The sheet was thinner than the existing lead shielding body thickness of 7 cm, and equivalent performance was confirmed. Through this study, the transmittance measurement sheet produced using Tungsten alloy filaments confirmed the possibility of transmission shielding in the high energy region. It has been confirmed that the usability as a substitute is also excellent. It is thought that it can be provided as basic data for the production of shielding agents with 3D printing technology in the future.

• Korean Journal of Medicinal Crop Science
• /
• v.13 no.3
• /
• pp.93-100
• /
• 2005

This research was performed to investigate the possibilities of industrial usage of camellia (Camellia japonica L.) by examining the antioxidant and antimicrobial effects of methanol extract with different sections. Content of total phenolics, DPPH radical scavenging activities and antibacterial activity of young leaf, mature leaf, flower bud, flower, bark, and seed of camellia were compared in vitro experimental models. Total phenolics was contained the higher in young leaf (74.62 mg), flower bud (65.02 mg) and flower (62.42 mg) but less than 20.95 mg per 100 g of dry weight in other parts of Camellia japonica L. And effects of antioxidant measured by DPPH radical scavenger activity ($RC_{50}$, reduce concentration 50%), was shown higher $7.16{\sim}18.14\;{\mu}g/m{\ell}$ in methanol extract of young leaf, flower bud and flower than $61.23\;{\mu}g/m{\ell}$ of BHT as a chemical oxidant. Also, the antimicrobial activity of Camellia japonica L. extracts determined using a paper disc method against food-borne pathogen and food spoilage bacteria, the young leaves extracts showed the most active antimicrobial activity against 7 kinds of harmful microorganisms. Flower bud extracts showed the highest antibacterial activity against P. aeruginosa and Enterobacter spp. C1036. In addition, the minimum inhibitory concentration (MIC) of young leaf extract against B. subtillis,S. fradiae,S. aureus,E. coli,P. aeruginosa, Enterobacter spp. C1036, and S. typhimurium were revealed 1 to 15 ${\mu}g/m{\ell}$. As a result, antimicrobial activity of camellia extracts was shown higher gram positive bacteria than gram negative bacteria.

• The korean journal of orthodontics
• /
• v.28 no.5 s.70
• /
• pp.813-823
• /
• 1998

The frictional force has been considered as an harmful factor in an active unit where tooth movement occurs, but as an advantageous factor in anchor unit that resist tooth movement. That is, efficient tooth movement is planned by using ligation methods that have low levels of bracket-wire frictional force and the anchorage control can be achieved by using ligation methods that have high levels of bracket-wire frictional force that result in binding of the bracket accompanied by little or no tooth movement. The purpose of this study was to evaluate the frictional force generated between bracket and wire in accordance with the methods of ligation, the material of ligation and the passage of time under artificial saliva. Tested were 0.017x0.022 inch stainless steel wires in standard edgewise twin brackets for upper central incisors in a 0.018-inch slot. The wires were ligated into the brackets with elastomeric modules and stainless steel ligatures. Whole tie, half tie, twisting tie and double overlay tie were done with elastomeric modules. With 0.009-inch stainless steel ligature whole tie and half tie were done by needle holder and whole tie by ligature tying plier. With 0.012-inch stainless steel ligature whole ties were done by needle holder. Whole tie groups of elastomeric module were kept in artificial saliva bath at $37^{\circ}C$ for 28 days. The frictional force was recorded by means of an Instron universial testing instrument (4202 INSTRON, Instron Co., U.S.A.) at initial, 7, 14, 21, and 28 days. The results for ligated samples in a simulated oral environment revealed the fellowing : ${\cdot}$In elastomeric module whole tie, 28 days group was significantly greater mean static frictional force than any other group but there were no significant differences among any other group (p>0.05). ${\cdot}$Elastomeric module twisting ties were significantly greater mean static frictional forces than any other ligation method but there were no significant differences between twisting tie and double overlay tie (p>0.05). Twisting tie, double overlay tie, whole tie, half tie showed differences in decreasing order. ${\cdot}$Stainless steel half tie produced lower mean static frictional force than whole tie, ligation by ligature tying plier produced greater mean static frictional force than by needle holder and ligation with 0.012-inch stainless steel ligature produced greater mean static frictional force than with 0.009-inch stainless steel ligature (p<0.05). ${\cdot}$There were no significant differences between the mean static frictional forces of elastomeric whole tie and stainless steel whole tie (p>0.05).

• Journal of Korean Society for Atmospheric Environment
• /
• v.32 no.5
• /
• pp.501-512
• /
• 2016

The study evaluated methods to measure condensable fine particles in flue gases and measured particulate matter by fuel and material to get precise concentrations and quantities. As a result of the method evaluation, it is required to improve test methods for measuring Condensable Particulate Matter (CPM) emitted after the conventional Filterable Particulate Matter (FPM) measurement process. Relative Standard Deviation (RSD) based on the evaluated analysis process showed that RSD percentages of FPM and CPM were around 27.0~139.5%. As errors in the process of CPM measurement and analysis can be caused while separating and dehydrating organic and inorganic materials from condensed liquid samples, transporting samples, and titrating ammonium hydroxide in the sample, it is required to comply with the exact test procedures. As for characteristics of FPM and CPM concentrations, CPM had about 1.6~63 times higher concentrations than FPM, and CPM caused huge increase in PM mass concentrations. Also, emission concentrations and quantities varied according to the characteristics of each fuel, the size of emitting facilities, operational conditions of emitters, etc. PM in the flue gases mostly consisted of CPM (61~99%), and the result of organic/inorganic component analysis revealed that organic dusts accounted for 30~88%. High-efficiency prevention facilities also had high concentrations of CPM due to large amounts of $NO_x$, and the more fuels, the more inorganic dusts. As a result of comparison between emission coefficients by fuel and the EPA AP-42, FPM had lower result values compared to that in the US materials, and CPM had higher values than FPM. For the emission coefficients of the total PM (FPM+CPM) by industry, that of thermal power stations (bituminous coal) was 71.64 g/ton, and cement manufacturing facility (blended fuels) 18.90 g/ton. In order to estimate emission quantities and coefficients proper to the circumstances of air pollutant-emitting facilities in Korea, measurement data need to be calculated in stages by facility condition according to the CPM measurement method in the study. About 80% of PM in flue gases are CPM, and a half of which are organic dusts that are mostly unknown yet. For effective management and control of PM in flue gases, it is necessary to identify the current conditions through quantitative and qualitative analysis of harmful organic substances, and have more interest in and conduct studies on unknown materials' measurements and behaviors.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.7
• /
• pp.504-509
• /
• 2018

The purpose of this study was to manufacture a high-performance titanium yellow pigment. Anatase type $TiO_2$ was the skeleton of the pigment and $Sb_2O_3$ is used as the color assistant for the coloring agent, $Cr_2O_3$. Mixed raw materials for the pigment were $TiO_2$(98%), $Sb_2O_3$(99.5%), and $Cr_2O_3$(99.5%). The raw materials were mixed by a dry process and crystallized by calcination at $1,000{\sim}1,200^{\circ}C$. The crystalline material was pulverized in a Jar Mill under $1{\mu}m$ by a wet process and dried for 12 hours at $100^{\circ}C$. The pigment was finally made by a fine grinding process. To determine the best temperature for calcination, 4 temperature sections ($1000^{\circ}C$, $1100^{\circ}C$, $1150^{\circ}C$, and $1200^{\circ}C$) were set up. The X-ray diffraction peak of the rutile crystalline structure was highest at $1,150^{\circ}C$. The yellow ceramic pigment, which has the rutile structure, was applied for coating materials. The synthesized pigments underwent a discoloration tests on the acid resistance, alkaline resistance, weather resistance and heat resistance. In addition, a detection test on harmful heavy metals ($Cr^{+6}$) was done. The resulting values (${\Delta}E$) of the weather resistance test (2000hr), acid resistance test, alkaline resistance test, and heat resistance test were 0.74, 0.16, 0.07 and 0.29. The resulting value for heavy metals testing was 34ppm.

• Journal of Chest Surgery
• /
• v.37 no.2
• /
• pp.131-138
• /
• 2004

High-flow gas insufflation to get a bloodless field during off-pump coronary artery bypass may have adverse effects on the coronary endothelium. This study was designed (1) to elucidate the effect of carbon dioxide gas insufflations on the coronary endothelium at different flow rates and (2) to assess the protective effect of humidifcation against the coronary endothelial damage. Material and Method: In nine pigs, the left anterior descending coronary artery (LAD) was exposed after a median sternotomy. The LAD was divided into 4 segments and a coronary arteriotomy was made in each LAD segment in the beating heart. The far distal arteriotomy was exposed to room air for 10 minutes and was harvested as a control. Non-humidified carbon dioxide gas at a continuous flow rate of 5 L/min (Group I), humidified carbon dioxide gas at a continuous flow rate of 5 L/min (Group II), and humidified carbon dioxide gas at a continuous flow rate of 10 L/min (Group III) were insufflated for 10 minutes on each coronary arteriotomy site, respectively. After harvesting the coronary segments, hematoxylin-eosin staining, elastic fiber staining, and immunostaining with a CD34 monoclonal antibody were performed to evaluate the depth of endothelial damage and to count the residual endothelial cells, Result: In all three groups (Group I, II, and III), internal elastic laminae were preserved, however, the endothelial layers were significantly damaged by carbon dioxide gas insufflation. The mean percentages of remaining endothelial cells were 20,9$\pm$16.7%, 39.3$\pm$19.6%, and 6.8$\pm$5.3%, in groups I, II, and III, respectively. The percentages of remaining cells were significantly higher in group II than in groups I and III (p=0.008). The percentages of remaining cells were significantly higher in group I than in group III (p=0.008). Conclusions: The harmful effect of carbon dioxide gas insufflation on the coronary endothelium was dependent on the flow rate. The addition of humidification did not protect the coronary endothelium from denudation injury caused by high flow carbon dioxide gas insufflations.

• Journal of Chest Surgery
• /
• v.33 no.9
• /
• pp.697-706
• /
• 2000

Background: Isolated lung perfusion(ILP) was developed as a new treatment approach to non-resectable primary or metastatic lung cancer, because of its ability to reduce systemic toxicity while delivering high-dose chemotherapeutic agents to the target organs. This research was planned to evaluate the direct toxic effect of high-dose cisplatin to the lung tissue during isolated lung perfusion. Material and Method: Fifteen mongrel dogs were divided in the perfusate for 40 minutes. The second group was composed of 5 mongrel dogs which underwent ILP with cisplatin 2.5 mg/Kg added to the perfusate for 30 minutes and 10 minutes with washing solution without cisplatin. The third group underwent the same procedure as the second group except cisplatin 5.0 mg/Kg in the perfusate. Activities of serum angiotensin converting enzyme(ACE), tumor necrosis factor-$\alpha$(TNF-$\alpha$), and concentration of serum lactate dehydrogenase(LDH) and blood urea nitrogen/creatinine (BUN/Cr) were analyzed in each groups at the time of pre-perfusion, 1 hour, 1 day, 1 week, and 2 weeks after ILP. Result: Serum ACE activities before and 1 hour, 1 day, 1 week, and 2 weeks after ILP in control group were 45.1$\pm$6.3, 44.6$\pm$9.3, 46.7$\pm$9.5, 50.8$\pm$9.1, 46.1$\pm$4.3 U/L. Those in cisplatin 2.5 and 5.0 mg/Kg groups were 49.4$\pm$12.6, 39.0$\pm$8.6, 42.3$\pm$15.9, 50.0$\pm$2.6, 53.8$\pm$8.3 and 55.5$\pm$12.3, 47.0$\pm$6.3, 45.1$\pm$6.9, 74.8$\pm$19.5, 60.2$\pm$12.0 U/L, respectively. Serum TNF-$\alpha$ activities in each group before and after ILP were 5.0$\pm$1.5 / 7.7$\pm$2.2 / 6.6$\pm$2.5 / 4.3$\pm$1.3 / 5.2$\pm$1.1(control), 8.7$\pm$1.6 / 9.9$\pm$2.2 / 7.9$\pm$1.5 / 6.3$\pm$2.2 / 7.4$\pm$2.4 (cisplatin 2.5 mg/Kg), and 6.9$\pm$0.7 / 8.9$\pm$3.4 / 7.9$\pm$4.0 / 3.3$\pm$0.9 / 5.8$\pm$1.3 pg/ml(cisplatin 5.0 mg/Kg). Mean LDH levels of each group were 225.7 / 271.3 / 328.9 / 350.8 / 255.7(control), 235.7 / 265.7 / 336.0 / 379.5 / 299.2 (cisplatin 2.5 mg/Kg), and 259.6 / 285.2 / 340.6 / 433.4 / 292.4 IU/L(cisplatin 5.0 mg/Kg). So there was no significant difference in serum ACE, TNF-$\alpha$, and LDH activity changes after ILP between the 3 groups. And, there was no significant changes in BUN/Cr in each groups, which was independent of ILP and perfused concentration of cisplatin. In addition, all dogs survived the ILP and there was no significant evidence of pulmonary vascular injury after 2 weeks of ILP with cisplatin. Conclusion: There was no harmful effect of cisplatin to the lund tissue of the mongrel dog up to 5.0 mg/Kg in perfusate. Therefore, it is perceived to be safe and effective to deliver high-dose cisplatin to the lung without pulmonary toxicity and renal damage with ILP.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.44 no.11
• /
• pp.1612-1620
• /
• 2015

Inflammation is a complex process involving a variety of immune cells, which defend the body from harmful stimuli. However, pro-inflammatory cytokines and inflammatory mediators can also exacerbate diseases such as cancer. Onion peel contains several phenolic compounds, including quercetin at an amount 20 times greater in peel than edible flesh. Therefore, in this study, the anti-inflammatory effects of onion peel ethanol extract (OPEE) were investigated lipopolysaccharide-induced inflammatory response. In our results, NO production decreased in a dose-dependent manner. Secretion of IL-6, $TNF-{\alpha}$, and $IL-1{\beta}$ was suppressed by 44%, 53%, and 60% respectively, at $100{\mu}g/mL$. Moreover, OPEE also suppressed expression of COX-2, iNOS, $NF-{\kappa}B$, and MAPKs in a dose-dependent manner. Formation of mice ear edema was reduced at the highest dose tested compared to the control, and reduction of ear thickness was observed in the histological analysis as well. In the acute toxicity test, no morality was observed in mice administered 5,000 mg/kg body weight of OPEE over a 2-week observation period. These results suggest that OPEE may have significant effects on inflammatory factors and be a potential anti-inflammatory material.

• Research in Community and Public Health Nursing
• /
• v.12 no.3
• /
• pp.795-814
• /
• 2001

To evaluate the effect of sex education on middle school students' access to the obscene online computer and video film contents. 154 students were selected as experimental group. and 154 students were selected as control group, sampled randomly from Andong. Kyungbook, Korea. An analysis was performed. A non-equivalent control group pre test-post test research design was used. The data were collected from April 2nd to April 19th. 2001. A pre-survey was done on general characteristics and the condition of accessing obscene online computer and video film contents on both experimental and control group. From the survey results information. sex education contents were put together. The researcher organized 3 ready-made sex education program and explained to the four school health nurses about the ready-made sex education program step by step and they educated their selected students with three classes of 45 minutes lecture. Two weeks after the last lecture, a post-test was conducted. Four weeks from the last lecture, another post-test was conducted. The existing studies by Choi Yongseon(1998) and Kim Hyeok(1998) were reviewed and two professors in the department of community health nursing advised on the study questionnaire writing. An SPSS Win 10.0 was used. The data of respondents' general characteristics were analyzed using frequency and percentage. $X^2$ test was used to verify the homogeneity of the experimental group and the control group. Repeated Measures ANOVA was used to find out whether sex education had an effect on the awareness of obscene online computer and video film contents and under-age prostitution through the online computer networks. and time and frequency of access to the obscene online computer and video film contents. The results of the study are as follow. 1. The results of the verification of homogeneity between the experimental group and the control group showed that there was no significant difference between the experimental group and the control group. 2. The first hypothesis, 'the experimental group which received sex education would have a higher level of awareness of accessing obscene contents than the control group which did not receive the education' was supported at p<0.0001. 3. The second hypothesis. 'the experimental group which received sex education would have a higher level of awareness of underage prostitution on computer networks than the control group which did not receive the education' was supported at p<0.05. 4. The third hypothesis, 'the experimental group which received sex education would spend time less accessing obscene video and computer contents than the control group which did not receive the education' was rejected at p>.05. 5. The 4-1 hypothesis. 'the experimental group which received sex education would access obscene computer contents less frequently than the control group which did not receive the education' was supported at p<0.0001. 6. The 4-2 hypothesis, 'the experimental group which received sex education would access obscene video contents less frequently than the control group which did not receive the education' was supported at p<0.0001. In conclusion, a systematic step-by-step sex education program should be developed to protect middle school students from the harmful online computer and video film access. An effective teaching material for sex education should be prepared to decrease middle school students' access to obscene online computer and video film contents.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.39 no.6
• /
• pp.894-901
• /
• 2010

To measure the heavy metal contents of marine invertebrates, we collected 239 individuals representing 52 species from the eastern (Pohang), western (Gunsan), and southern (Tongyeong) coasts of Korea: 34 species of molluscan shellfish (Gastropoda and Bivalvia), 6 species of Cephalopoda, 8 species of Crustacea, and 4 other species. The mean levels of the heavy metals in the samples taken from the edible portion of each Gastropoda were high in the order of Zn ($21.471\;{\mu}g/g$), Cu ($4.115\;{\mu}g/g$), Mn ($0.868\;{\mu}g/g$), Ni ($0.254\;{\mu}g/g$), Pb ($0.238\;{\mu}g/g$), Cd ($0.154\;{\mu}g/g$), and Cr ($0.110\;{\mu}g/g$). The heavy metals in the Bivalvia were high in the order of Zn ($35.655\;{\mu}g/g$), Mn ($5.500\;{\mu}g/g$), Cu ($3.129\;{\mu}g/g$), Cd ($0.423\;{\mu}g/g$), Ni ($0.402\;{\mu}g/g$), Cr ($0.233\;{\mu}g/g$), and Pb ($0.232\;{\mu}g/g$). The heavy metals in the Cephalopoda were high in the order of Zn ($18.380\;{\mu}g/g$), Cu ($3.594\;{\mu}g/g$), Mn ($0.630\;{\mu}g/g$), Cr ($0.150\;{\mu}g/g$), Pb ($0.068\;{\mu}g/g$), Cd ($0.034\;{\mu}g/g$), and Ni ($0.030\;{\mu}g/g$). The heavy metals in the Crustacea were high in the order of Zn ($25.333\;{\mu}g$/g), Cu ($9.042\;{\mu}g/g$), Mn ($0.659\;{\mu}g/g$), Cr ($0.592\;{\mu}g/g$), Cd ($0.207\;{\mu}g/g$), Pb ($0.126\;{\mu}g/g$), and Ni ($0.094\;{\mu}g/g$). Therefore, the mean levels of the harmful heavy metals (Cd and Pb) in marine invertebrates were high in the order of Bivalvia>Crustacea＝Gastropoda>Cephalopoda. The average daily intakes of the heavy metals from the fisheries products were as follows: Cd ($6.88\;{\mu}g$), Cr ($19.13\;{\mu}g$), Cu ($137.02\;{\mu}g$), Mn ($156.13\;{\mu}g$), Ni ($11.39\;{\mu}g$), Pb ($7.01\;{\mu}g$) and Zn ($1,025.94\;{\mu}g$). The average weekly intakes of Cd, Cu, Pb and Zn from the fisheries products were 11.47%, 0.46%, 3.27% and 1.71% respectively, as compared with PTWI (Provisional Tolerable Weekly Intakes) established by FAO/WHO Expert Committee for Food Safety Evaluation.