• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.22 no.7
• /
• pp.675-682
• /
• 2011

This paper presents two ground plane effects due to the size of two rectangular apertures for two-wire transmission line with equal line length crossing the changeable rectangular apertures in infinite ground planes. The CST MWS is used to determine the characteristics of the insertion loss of the transmission line from the load section in accordance with the ground plane aperture size. The results show that the insertion gain and the insertion loss are periodically observed for the multiple frequency of the half wavelength resonance by the wire length when the transmission line is nearby to horizontal side or vertical side of the aperture. The measurements of the insertion loss are performed to verify the theoretical analysis.

• Proceedings of the KSR Conference
• /
• 2008.06a
• /
• pp.339-342
• /
• 2008

In this paper, the lessons and learns are introduced from the result of the trial project which is the first CBTC(Communication Based Train Control System) at Korail Bundang Line. This project has started end of 2002 and finished recently by Samsung SDS. The main purpose of this project was that new technology was seek for next generation of railway signal control system adapted in Korea. In 2002, there was no any revenue service system using Radio Frequency CBTC in the world at that time. Just a few trial project was on going in USA and EU. In well developed cities, the metro system have been built and old enough therefore they have to be considering re-signalling their existing system with advanced system for increasing availabilities of line usage and safety. This Bundang Line Trial Project was the first Korean CBTC project for above reasons. Most sub systems have been developed using local technology such as Electronics Controlled Interlocking System and Track Circuit Systems etc. Specially, in this project the RF-Communication devices are developed by local technology using DSSS(Direct Sequency Spread Spectrum) instead of FHSS(Frequency Hopping Spread Spectrum). This project has lasted for more than five years originally planned for three years because it was only accessible only night time in the main line from Ori to Suseo about 20km long. Each night only 2 and half hours are available to use the main line. Now the trial project has been done successfully with meet the customer's requirement, therefore the upgrade the mainline of Bundang line and another extension area up to Wangsipli to make revenue service using this new technology. This paper shows this result of the trial project and the strategy of upgrade and extension project as well.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.40 no.7
• /
• pp.532-541
• /
• 2003

In a memory, most power is dissipated in high capacitive lines such as predecoder lines, word lines, and bit lines. To reduce the power dissipation in these high capacitive lines, this paper proposes three techniques using charge recycling and charge sharing. One is the charge recycling predecoder (CRPD). The second one is the charge recycling word line decoder (CRWD). The last one is the charge sharing bit line (CSBL) for a ROM. The CRPD and the CRWD recycle the previously used charge in predecoder lines and word lines. Theoretically, the power consumption in predecoder lines and word lines are reduced to a half. The CSBL reduces the swing voltage in the ROM bit lines to very small voltage using a charge sharing technique. the CSBL can significantly reduce the power dissipation in ROM bit lines. The CRPD, the CRWD, and the CSBL consume 82%, 72%, and 64% of the power of previous ROM designs respectively. A charge recycling and charge sharing ROM (CRCS-ROM) with the CRPD, the CRWD, and the CSBL is implemented. A CRCS-ROM with 8K16bits was fabricated in a 0.3${\mu}{\textrm}{m}$ CMOS process. The CRCS-ROM consumes 8.63㎽ at 100MHz with 3.3V. The chip core area is 0.1 $\textrm{mm}^2$.

• Fashion & Textile Research Journal
• /
• v.7 no.5
• /
• pp.494-500
• /
• 2005

This study classifies somatotype from exact measurements according to the women somatotype with different drop value and isfunctional and has high body fitness. This study was preceded in the following process. Took 147 women in their 20's measurement directly and grasped the general body characteristic, and classified somatotype according to distribution of drop. Drop value is classified into Drop I, Drop II, and Drop III. Drop I is the difference value between bust line and waist line measurement. Drop II is the difference value between hip line and waist line measurement. Drop III is the difference value between hip line and bust line measurement. Suggested distribution of somatotype based on drop istribution. Classified somatotype into 4 types according to the mixture of combination of Drop I, II, and III. Comprehended the characteristics of somatotype based on basic statistical data. Type 1, M type, displays 40 % distribution that is most high distribution rate among four types and it is normal type which is similar to average value in size in the this study. Type 2, A type, displays 32.4% and it's a lower half of their body developed type with a flat busted and hippy. Type 3, X type, displays 19% and it's a healthy type with tall height, slender waist and curves of bust and hip lines. Type 4, H type, displays 8.6% and it's a biggest type in size which is busty, full hipped and nearly has no curves of body line.

• Journal of the Korean Society of Costume
• /
• v.12
• /
• pp.9-23
• /
• 1988

This study is on the costumes for Korean traditional play, Nong-ak(farm music), and intends to analyze their aesthetic features, laying emphasis on Pilbong Nong-ak, Im sil, Chollanam-do. About its origin there are many kinds of theories; for example, the theory of hoping stability, the theory of it being related with Buddhism, the theory of martial music, etc. Shamanic, Buddhist, and martical fators that support these theories are expressed through flags, bells, drums, Deograe (half-coats), Cheonrips (sang-mo, felf hats), go-kkals(peaked hats), colored lines called 'ga-sa', which are used in Nong-ak. The characteristic of the costumes used in Pilbong Nong-ak is that it keeps its conservativeness and the costumes of its members are various and splendid. For example, leader groups' black half coats, Changbu's and Hwa-dong's red and bule over coats are remarkable. Particpants wear gok-kal or cheonrip, trousers and half coats which are the basic costumes of Korean Hanbok, and wear blak half coats or blue vests and put blue, red, and yellow lines around them. The colors and knotting methods of those lines in this region are the same with those of chollawoo-do and Kyongi province, but different form those of Kongwon and Kyong-sang province using green, red, and yellow colors. This comparison of colors shows each region's preference of peculiar colors and those colors coincide with colors used in flags. The research on the aesthetic characteristics of Nong-ak clothes through each region's clothes tells us that these can be linear clothes which have expressiveness as stage clothes used in Madangori, the play which is performed in the field, and modern spatial formativeness. Those characteristics are as follows; 1. The expressions of a rhythmical and daring round line by turning a long line of sang-mo. 2. Various rhythms according to the attaching methods. 3. The expressions of thick, simple, and daring color lines. 4. Natural beauty of materials. 5. The popular simplicity and non-technicality 6. The beauty of five-direction colors, Oriental ideal colors Consequently in this study our national consciousness of beauty are examined through clothes. It is suggested that the aesthetic characteristics of Nong-ak clothes and ornaments should be effectively expressed, for this purpose. interests in participants' clothes should be increased in order to prevent the confusion of each region's features. Also it is necessary to improve color lines, their length, width, and knotting methods, and beautify instrument. Finally this study intends to bring the reappraisal about the art of Nong-ak clothes and its re-establishment in view of modern aesthetic consciousness.

• Journal of electromagnetic engineering and science
• /
• v.9 no.2
• /
• pp.85-97
• /
• 2009

As operating frequency is raised and as more integration with active and passive elements is required, it becomes difficult to fabricate more than 120 ${\Omega}$ characteristic impedance of a mierostrip line. To solve this problem, an equivalent high impedance transmission-line section is suggested, which consists mainly of a pair of coupled-line sections with two shorts. However, it becomes a transmission-line section only when its electrical length is fixed and its coupling power is more than half. To have transmission-line characteristics(perfect matching), independently of coupling power and electrical length, two identical open stubs are added and conventional design equations of evenand odd-mode impedances are modified, based on the fact that the modified design equations have the linear combinations of conventional ones. The high impedance transmission-line section is a passive component and therefore should be perfectly matched, at least at a design center frequency. For this, two different solutions are derived for the added open stub and two types of high impedance transmission-line sections with 160 ${\Omega}$ characteristic impedance are simulated as the electrical lengths of the coupled-line sections are varied. The simulation results show that the determination of the available bandwidth location depends on which solution is chosen. As an application, branch-line hybrids with very weak coupling power are investigated, depending on where an isolated port is located, and two types of branch-line hybrids are derived for each case. To verify the derived branch-line hybrids, a microstrip branch-line hybrid with -15 dB coupling power, composed of two 90$^{\circ}$ and two 270$^{\circ}$ transmission-line sections, is fabricated on a substrate of ${\varepsilon}_r$= 3.4 and h=0.76 mm and measured. In this case, 276.7 ${\Omega}$ characteristic impedance is fabricated using the suggested high impedance transmission-line sections. The measured coupling power is -14.5 dB, isolation and matching is almost perfect at a design center frequency of 2 GHz, showing good agreement with the prediction.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.17 no.2
• /
• pp.257-262
• /
• 2017

In this paper, we proposed a rectangular planar monopole antenna with a double sleeve that applied to a half-cut and a discontinuous feed structure. A rectangular planar monopole antenna with a double sleeve was cut in half along the magnetic symmetry line, and impedance matching was achieved by a discontinuous structure was applied to a feeder and by adjusting the double sleeve gap. We used the HFSS simulator of ANSYS company to confirm the antenna parameter property, and the antenna size was $21{\times}40mm^2$. In the proposed antenna, the simulation frequency range with VSWR of 2 or less was 2.6GHz to 10.25GHz. The bandwidth was 7.65GHz. The frequency range of the fabricated antenna was 3.3GHz to 9.75GHz, and the bandwidth was 6.45GHz. The measured radiation pattern frequencies were 3.5GHz, 5.5GHz, 7.5GHz, and 9.5GHz. A radiation pattern similar to the dipole antenna pattern was obtained at all frequencies.

• Journal of applied mathematics & informatics
• /
• v.9 no.2
• /
• pp.679-694
• /
• 2002

New fixed point theorems of the authors are used to establish the existence of one (or more) C[0, $infty$) solutions to the nonlinear integral inclusion $y(t)\in{\int_0}^{\infty}K(t,s)F(s,y(s))ds\;for\;t\in[0,\infty)$.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.26 no.11
• /
• pp.1728-1735
• /
• 1989

A design procedure for microstrip bandpass filters using step impedance resonators (SIR's) and tapped input/output to a conventional parallel coupled line bandpass filter is presented. The filter configuration consisting of both half-wavelength and SIR's suppreses to spurious resonance response near the second harmonics, while tapping techniques offer benefit in situations where the impractical. The measured frequency responses of the designed filter are in close agreement with the computed responses.

• Proceedings of the IEEK Conference
• /
• 1998.06a
• /
• pp.433-436
• /
• 1998

Hot carrier induceed the performance degradation of sense amplifier circuit in DRAM has been measured and analyzed using 0.8.mu.m CMOS process. Simulation and experimental results show that the degradation of the MOS devices affects the decrease of the half-Vcc, voltage gain and the increase of the sensing voltage gain and the increase of the sensing voltage. The dominant degradation mechanism is the capacitance imblance in the bit-line pair. We carried out the spice simulation to investigate the degradation of the sense amplifier circuit.