• Korean Journal of Metals and Materials
• /
• v.49 no.12
• /
• pp.989-994
• /
• 2011

Samples with compositions of 80 wt% Mg-14 wt% Ni-6 wt% $Fe_2O_3$ (named $Mg-Ni-Fe_2O_3$), and 78 wt% Mg-14 wt% Ni-6 wt% $Fe_2O_3-2$ wt% CNT (named $Mg-Ni-Fe_2O_3-CNT$ ) were prepared by reactive mechanical grinding. Hydriding and dehydriding properties and effects of CNT addition on the hydriding and dehydriding rates of $Mg-Ni-Fe_2O_3$ were then investigated. Activation of the $Mg-14Ni-6Fe_2O_3$ sample was completed after three hydriding (under 12 bar $H_2$)-dehydriding (under 1.0 bar $H_2$) cycles at 573 K. The addition of CNT to the $Mg-14Ni-6Fe_2O_3$ sample made the activation process unnecessary, with a small decrease in the hydrogen-storage capacity.

• Journal of Society of Preventive Korean Medicine
• /
• v.8 no.2
• /
• pp.45-53
• /
• 2004

We measured biophoton emissions from seven acupuncture points of eight healthy subjects. The measured points are the Yintang, the $Danch{\bar{u}}$, the Shinketsu, the left and right $R{\bar{o}}ky{\bar{u}}$ and the left and right Yaotongwue of hands. The photo multiplier tube (H-610805s, Hamamatsu, Japan) has spectral range between 300nm and 650nm. Significantly low emission rate was observed at the Shinketsu where the rate was $3.7\;{\pm}\;1.8\;cps$. On the average the highest emission was from the Yaotongxue points where the rate was $11.3\;{\pm}\;5.4$. The high correlation between the left and right hands, and the low correlation between different points are consistent with previous reports.

• Bulletin of the Korean Chemical Society
• /
• v.15 no.1
• /
• pp.37-45
• /
• 1994

$(NH_4)_{4.5}[H_{3.5}{\alpha}-PtMo_6O_{24}]{\cdot}1.5\;H_2O(A),\;(NH_4)_4[H_4{\beta}-PtMo_6O_{24}]{\cdot}1.5\;H_2O(B),\;and\;K_{3.5}[H_{4.5}{\alpha}-PtMo_6O_{24}]{\cdot}3\;H_2O(C)$ have been synthesized and their molecular structures have been also determined by single-crystal X-ray diffraction technique. The space groups, unit cell parameters, and R factors are as follows: Compound A, monoclinic, $A_{2/a}$, a= 19.074 (3), b=21.490 (3), c=15.183 (2) ${\AA};\;{\beta}$=109.67 (1) ${\AA}$; z=8; R=0.075($IF_0I>4{\sigma}(IF_0I);$ Compound B, triclinic, P$bar{1}$, a=10.776 (2), b=15.174 (4), c=10.697 (3) ${\AA};\;{\alpha}$ =126.29 (2), ${\beta}$=111.55 (2), ${\gamma}$=93.18 (2) ${\AA}$; Z=2; R=0.046($IF_0I>3{\sigma}(IF_0I);$): Compound C, triclinic, Pl, a=12.426 (2), b=13.884 (2), c=10.089 (1) ${\AA}$; ${\alpha}$=102.59 (2), ${\beta}$=110.73 (1), ${\gamma}$=53.93 (1) ${\AA}$; Z=2; R=0.074 ($IF_0I>3{\sigma}(IF_0I)$. Compounds A and C contain the well-known Anderson structure (planar structure) heteropoly oxometalate having approximate $bar{3}_m(D_{3d})$ symmetry, while compound B contains the bent structure heteropoly oxometalate having appproximate $2_{mm}(C2_v)$ symmetry. The bent structure and the planar one are geometrical isomers. These compounds are rot only novel heteroply molybdates containing platinate(IV) but also the first example of geometrical isomerism in the hexamolybdoheteropoly oxometalates. That isomerization surprisingly occurred because of the change of only 0.5 non-acidic hydrogen atom attached to the polyanion such as $[H_{3.5}{\alpha} -PtMo_6O_{24}]^{4.5-}{\to}[H_4{\beta}-PtMo_6O_{24}]^{4-}{\to}[H_{4.5}{\alpha} -PtMo_6O_{24}]^{3.5-}$. It seems that the gradual protonation of the polyanion plays an important role in that isomerism. These heteropolyanions form dimers by strong hydrogen bonds between two heteropolyanions in the respective crystal system.

• Membrane Journal
• /
• v.34 no.1
• /
• pp.50-57
• /
• 2024

In this experiment, Pd-Ag-Cu membrane was manufactured using electroless plating on an α-Al₂O₃ support. Pd, Ag and Cu were each coated on the surface of the support through electroless plating and heat treatment was performed for 18 h at 500℃ in H₂ in the middle of electroless plating to form Pd alloy. The surface of the Pd-Ag-Cu membrane was observed through Scanning Electron Microscopy (SEM), and the thickness of the Pd membrane was measured to be 7.82 ㎛ and the thickness of the Pd-Ag-Cu membrane was measured to be 3.54 ㎛. Energy dispersive X-ray spectroscopy and X-ray diffraction analysis confirmed the formation of a Pd-Ag-Cu alloy with a composition of Pd-78wt%, Ag-8.81wt% and Cu-13.19wt%. The gas permeation experiment was conducted under the conditions of 350~450℃ and 1~4 bar in H₂ single gas and H₂/N₂ mixed gas. The maximum H₂ flux of the hydrogen separation membrane measured in H₂ single gas is 74.16 ml/cm²·min at 450℃ and 4 bar for the Pd membrane and 113.64 ml/cm²·min at 450℃ and 4 bar for the Pd-Ag-Cu membrane. In the case of the separation factor measured in H₂/N₂ mixed gas, separation factors of 2437 and 11032 were measured at 450℃ and 4 bar.

• The Journal of Pediatrics of Korean Medicine
• /
• v.22 no.1
• /
• pp.13-24
• /
• 2008

Objectives This study was designed to analyze the clinical studies on Mental retardation(MR) in traditional Chinese medicine(TCM). Methods For this study, we searched the clinical studies on MR, which had been published from 2003 to 2007, through web site CNKI(中國知識基礎設施工 http://www.cnki.net). There were 17 clinical studies and we focused on those studies. Results 1. In those Chinese studies, they used following words to describe Mental retardation; 小人弱智($xi\check{a}o\acute{e}rru\grave{o}zh\grave{i}$), 智能發育不全($zh\grave{i}n\acute{e}ngf\bar{a}y\grave{u}buqu\acute{a}n$), 智力低下($zh\grave{i}l\grave{i}d\bar{i}xi\grave{a}$), 精神發育遲滯($j\bar{i}ngsh\acute{e}f\bar{a}y\grave{u}ch\acute{i}zh\grave{i}$), 智能落后($zh\grave{i}n\acute{e}nglu\grave{o}h\grave{o}u$), 智能落后($zh\grave{i}n\acute{e}ngch\acute{i}hu\check{a}n$), 失天愚型患人($xi\bar{a}nti\bar{a}ny\acute{u}x\acute{i}nghu\grave{a}n'\acute{e}r$). 2. There were many kinds of TCM treatment methods for MR, such as herbal medicine, acupuncture, electroacupunture, acupoint injection, Chuna therapy, and special education. And those TCM treatments methods showed higher efficacies in the treatment of MR compared with Western medicine. 3. Mental retardation was related with the deficiency of heart, kidney, liver, spleen(心虛, 腎虛, 肝虛, 脾虛) and the pathological mechanism of Phlegm(絹) and Blood stasis(慫沂)in the studies about the Bian Zheng-the types of differential diagnosis- of MR. 4. Most of studies used Intelligence Quotient(IQ) to assess the efficacy of TCM treatment of MR. And the duration of treatment, the degree of illness, the age of patient, and the cause of illness affected the prognosis of MR. Conclusions These results suggest that traditional medicine could be one of the useful treatments on MR. And these results could be used in the clinical practices and studies on MR in Korea.

• Journal of Digital Convergence
• /
• v.10 no.5
• /
• pp.283-288
• /
• 2012

This study was undertaken to investigation the spray characteristics of the twin fluid atomization nozzle system. The light oil was injected at the normal temperature and injection pressure was 5 bar - 10 bar by 1 bar and volume flow was 0.5, 1.0 and 2,0 mmH2O(X10-2). We measured the SMD of sprayed droplet to study spray characteristics. The following conclusions were reached from the results of these study. 1. The more injection pressure increased, the more SMD decreased. 2. The more measuring distance between pressure nozzle tip and analyser beam increased, the more SMD increased. 3. SMD of the blower-air-added injection system were shown, increasing volume flow decreased respectively. The result of this study indicated the blower-air-added injection system induced beneficial changes in SMD. And it will be considered important indicator for spray characteristics design and performance evaluation of twin fluid atomization nozzle system.

• Korean Chemical Engineering Research
• /
• v.43 no.2
• /
• pp.318-323
• /
• 2005

Supercritical water oxidation (SCWO, P>221 bar, T>$374^{\circ}C$) is a promising method for the decomposition of refractory organic compounds. In this study, the SCWO of Ethylenediaminetetraacetic acid (EDTA) was carried out in a tubular-type continusous reactor system with an $H_2O_2$ oxidant at $387-500^{\circ}C$, 250 bar and residence time (RT) of 15.9-88.9 s. The decomposition efficiencies increased with increasing temperature and oxidant amount, while it was inversely proportional to feed flow rate. The decomposition efficiency of 99.6% was obtained at $500^{\circ}C$, 250 bar, oxidant amount of 400% and residence time of 40.1 s. The effect of temperature on the decomposition efficiency was more significant than that of oxidant amount. In the case of the decomposition efficiency of 5,000 mg/L of EDTA (3,063 mg/L as $COD_{Cr}$), the decompostion of 99% or higher was obtained at the condition of over 40.1 s (RT) and 200 stoichiometric % of $H_2O_2$ in the supercritical water of $500^{\circ}C$ and 250 bar.

• Analytical Science and Technology
• /
• v.20 no.4
• /
• pp.355-360
• /
• 2007

The title complex, $(C_3H_{12}N_2)[\{Cd(H_2O)(C_6H_5O_7)\}_2]{\cdot}6H_2O$, I, has been prepared and its structure characterized by FT-IR, EDS, elemental analysis, ICP-AES, and X-ray single crystallography. It is triclinic system, $P{\bar{1}}$ space group with a = 10.236(2), b = 11.318(2), c = $13.198(2){\AA}$, ${\alpha}=77.95(1)^{\circ}$, ${\beta}=68.10(1)^{\circ}$, ${\gamma}=78.12(1)^{\circ}$, V = $1373.5(3){\AA}^3$, Z = 2. Complex I has constituted by protonated 1,3-diaminopropane cations, citrate coordinated cadmium(II) anions, and free water molecules. The central cadmium atoms have a capped trigonal prism geometry by seven coordination with six oxygen atoms of three different citrate ligands and one water molecule. Citrate ligands are bridged to three different cadmium atoms. Each cadmium atom is linked by carboxylate and hydroxyl groups of citrate ligand to construct an one-dimensional ladder-type assembly structure. The polymeric crystal structure is stabilized by three-dimensional networks of the intermolecular O-H${\cdots}$O and N-H${\cdots}$O hydrogen-bonding interaction.

• Transactions of the Korean hydrogen and new energy society
• /
• v.16 no.1
• /
• pp.25-30
• /
• 2005

수소 분위기에서 10wt.%MnO와 기계적인 분쇄(반응성 기계적 분쇄)에 의해 Mg의 수소 저장 성질을 향상시켰다. 회전 속도는 250 rpm, 밀링시간은 2 h, 그리고 시료 대 볼 중량비는 1/45이었다. 준비한 Mg-10wt.%MnO 시료는 활성화를 위한 수소화물 형성 분해 싸이클링이 필요없었으며, 첫 번째 싸이클 593k 12 bar $H_2$에서, 10분 동안에 3.12wt.%, 60분 동안에 3.95wt.%의 수소를 흡수하였다. 또한 Mg-10wt.%MnO는 593k 0.8 bar $H_2$에서 60분 동안에 2.12wt.%의 수소를 방출하였다. MnO와 Mg의 방응성 분쇄는, 핵생성을 용이케하고 (Mg 입자의 표면에 결함 형성과 첨가물에 의해), Mg 입자의 표면에 crack을 만들어 Mg의 입자 크기를 줄여 그 결과 수소 원자의 확산 거리를 작게 함으로써 수소 흡수 방출 속도를 증가시킨다. 수소화물 형성 분해 싸이클링은 Mg 입자의 표면에 crack을 만들고 Mg의 입자 크기를 줄여 수소 흡수 방출 속도를 증가시킨다.

• Korean Journal of Metals and Materials
• /
• v.49 no.4
• /
• pp.298-303
• /
• 2011

Mg-23.5 wt%Ni-xwt%Cu (x = 2.5, 5 and 7.5) samples for hydrogen storage were prepared by melt spinning and crystallization heat treatment from a Mg-23.5 wt%Ni-5 wt%Cu alloy synthesized by the gravity casting method. They were then ground under $H_2$ to obtain a fine powder. Among these samples the Mg-23.5Ni-2.5Cu sample had the highest hydriding and dehydriding rates after activation. The Mg-23.5Ni-2.5Cu sample absorbed 3.59 and 4.01 wt%H for 10 and 60 min, respectively, at 573K under 12 bar $H_{2}$. The activated 88(87.5Mg-10Ni-2.5Cu)-$5Nb_{2}O_{5}-7NbF_{5}$ sample absorbed 2.93 wt%H for 10 min, and 3.14 wt%H for 60 min at 573K under 12 bar $H_{2}$.