• Proceedings of the Korean Geotechical Society Conference
• /
• 2010.09c
• /
• pp.81-85
• /
• 2010

The medicinal plant, Kanzo (Glycyrrhiza uralensis), mainly grows on arid lands. The root of Kanzo has been compounded about 70% of herbal medicines in Japan because it has an important medicinal element. In addition, in recent years, the expansion of desertification becomes a serious problem. The cause is chiefly man activity such as over gathering plants1). The aim of this study is to prevent desertification by cultivating Kanzo with high quality. The first step is to grow Kanzo for greening. The second step is to stably produce the root with high medicinal quality. This paper presents growth properties of cultivating Kanzo by bottom watering method, which is under constant groundwater level. The main results of this paper are as follows: (1) The lower water content of cultivating soil is, the longer the root length is, (2) Growth of Kanzo is influenced by soil types, (3) Thick primary roots grow directly and vertically in low water content. On the other hand, thin secondary roots grow curvedly and horizontally in high water content and (4) Measuring evapo-transpiration velocity is the effective method to evaluate roots' growth tendency in the field.

• Journal of Sensor Science and Technology
• /
• v.29 no.3
• /
• pp.187-193
• /
• 2020

Ultraviolet (UV) sensors are widely applied in industrial and military fields such as environmental monitoring, medicine and astronomy. Zinc oxide (ZnO) is considered as one of the promising materials for UV sensors because of its ease of fabrication, wide bandgap (3.37 eV) and high chemical stability. In this study, we used the hydrothermal growth of ZnO to form two types of ZnO nanostructures (Nanoflower and nanorod) and applied them to a UV sensor. To improve the performance of the UV sensor, the hydrothermal growth was used in a two-step process for fabricating ZnO hierarchical nanostructures. The fabricated ZnO hierarchical nanostructure improved the performance of the UV sensor by increasing the ratio of volume to surface area and the number of nanojunctions compared to one-step hydrothermal grown ZnO nanostructure. The UV sensor based on the ZnO hierarchical nanostructure had a maximum photocurrent of 44 ㎂, which is approximately 3 times higher than that of a single nanostructure. The UV sensor fabrication method presented in this study is simple and based on the hydrothermal solution process, which is advantageous for large-area production and mass production; this provides scope for extensive research in the field of UV sensors.

• Journal of Powder Materials
• /
• v.20 no.1
• /
• pp.19-23
• /
• 2013

Ru films were successfully prepared by plasma-enhanced atomic layer deposition (PEALD) using $Ru(EtCp)_2$ and $NH_3$ plasma. To optimize Ru PEALD process, the effect of growth temperature, $NH_3$ plasma power and $NH_3$ plasma time on the growth rate and preferred orientation of the deposited film was systemically investigated. At a growth temperature of $270^{\circ}C$ and $NH_3$ plasma power of 100W, the saturated growth rate of 0.038 nm/cycle was obtained on the flat $SiO_2$/Si substrate when the $Ru(EtCp)_2$ and $NH_3$ plasma time was 7 and 10 sec, respectively. When the growth temperature was decreased, however, an increased $NH_3$ plasma time was required to obtain a saturated growth rate of 0.038 nm/cycle. Also, $NH_3$ plasma power higher than 40 W was required to obtain a saturated growth rate of 0.038 nm/cycle even at a growth temperature of $270^{\circ}C$. However, (002) preferred orientation of Ru film was only observed at higher plasma power than 100W. Moreover, the saturation condition obtained on the flat $SiO_2$/Si substrate resulted in poor step coverage of Ru on the trench pattern with an aspect ratio of 8:1, and longer $NH_3$ plasma time improved the step coverage.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.12 no.6
• /
• pp.311-316
• /
• 2002

Two different approaches, namely two-step deposition process and Bias-Enhanced Nucleation (BEN) technique have been examined for deposition of high quality diamond thin film on polycrystalline Ni which has low chemical activity with the carbon neutrals provided from the $CH_4/H_2$mixtures. A two-step deposition process, consisted of pre-deposition of soot layer at lower temperatures and subsequent deposition at higher temperature condition, has been developed to deposit diamond layer directly on Ni substrate. Diamond particles were observed after deposition step at $925^{\circ}C$ for 5 hours and those particles seem to be nucleated from the soot layer pre-deposited at lower temperatures ($810^{\circ}C$). Diamond particles of a substantial size were found on Ni substrate after biasing -220 V for 10 minutes and subsequent deposition for 2 hours while no diamond particles were observed under the conditions without applied bias.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.16 no.6
• /
• pp.85-105
• /
• 2021

In this study, a case study was conducted on Advanced Nano Products Co.,Ltd, a company that was established in 2000 and has the core technology to produce and commercialize nano materials and ultrafine nano powders based on nano technology. Deviating from the general case study, a case study analysis frame was set based on the theory of technology management and industry-university cooperation theory, and cases were analyzed. In this case study, Advanced Nano Products Co.,Ltd. was analyzed from two analytical perspectives: the establishment of a Management Of Technology system within the company and the Industry-Academic Cooperation activity. Based on this theoretical-based analysis framework, company visit interviews and related data research and analysis were conducted. As a result of the study of the case company, it was possible to derive how the technology management and industry-university cooperation affect the growth stage of the company as follows. First, the strategic use of technology management is an important factor in strengthening the competitive advantage and core competencies of venture companies, and for survival and growth of startups in the early stages. Second, strategic use of technology management and patents and establishment of a patent management system are a part of business strategy and play a pivotal role in corporate performance. Third, the human and material infrastructure of universities affects the growth of companies in the early stage of start-up, and the high utilization of industry-university cooperation promotes the growth of companies. Fourth, continuous industry-academic cooperation activities in the growth and maturity stages of a company's growth stage are the basis for activating external exchanges and building networks. Lastly, technology management and industry-university cooperation were found to be growth factors for each growth stage of a company. In order for a company to develop continuously from the start-up to the growth and maturity stages, it is necessary to establish a technology management system from the beginning and promote strategic technology management activities. In addition, it can be said that it is important to carry out various industry-academic cooperation activities outside the company. As a result of the case analysis, it was found that Advanced Nano Products Co.,Ltd, which performed these two major activities well, overcame the crisis step by step and continued to grow until now. This study shows how the use of technology management and industry-academic cooperation creates value in each growth stage of technology-based venture companies. In addition, its active use will play a big role in the growth of other venture companies. The results of this case study can be a valid reference for growth research of technology start-up venture companies and related field application and utilization.

• Journal of Surface Science and Engineering
• /
• v.44 no.4
• /
• pp.131-136
• /
• 2011

A kinetic study has been made for the growth of nanocrystalline diamond (NCD) particles to a continuous thin film on silicon substrate in a microwave plasma chemical vapor deposition reactor. Parameters of deposition have been microwave power of 1.2 kW, the chamber pressure of 110 Torr, and the Ar/$CH_4$ ratio of 200/2 sccm. The deposition has been carried out at temperatures in the range of $400\sim700^{\circ}C$ for the times of 0.5~16 h. It has been revealed that a continuous diamond film evolves from the growth and coalescence of diamond crystallites (or particles), which have been heterogeneously nucleated at the previously scratched sites. The diamond particles grow following an $h^2$ = k't relationship, where h is the height of particles, k' is the particle growth rate constant, and t is the deposition time. The k' values at the different deposition temperatures satisfy an Arrhenius equation with the apparent activation energy of 4.37 kcal/mol or 0.19 eV/ atom. The rate limiting step should be the diffusion of carbon species over the Si substrate surface. The growth of diamond film thickness (H) shows an H = kt relationship with deposition time, t. The film growth rate constant, k, values at the different deposition temperatures show another Arrhenius-type expression with the apparent activation energy of 3.89 kcal/mol or 0.17 eV/atom. In this case, the rate limiting step might be the incorporation reaction of carbon species from the plasma on the film surface.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.14 no.1
• /
• pp.26-33
• /
• 2001

The proposed system was composed of pre-processor which was executing binary/high-pass filtering and post-processor which ranged from statistic data to prediction. In post-processor work, step one was filter process of image, step two was image recognition, and step three was destruction degree/time prediction. After these processing, we could predict image of the last destruction timestamp. This research was produced variation value according to growth of tree pattern. This result showed improved correction, when this research was applied image Processing. Pre-processing step of original image had good result binary work after high pas- filter execution. In the case of using partial discharge of the image, our research could predict the last destruction timestamp. By means of experimental data, this prediction system was acquired $\pm$3.2% error range.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2001.07a
• /
• pp.319-322
• /
• 2001

The proposed system was composed of pre-processor which was executing binary/high-pass filtering and post-processor which ranged from statistic data to prediction. In post-processor work, step one was filter process of image, step two was image recognition, and step three was destruction degree/time prediction. After these processing, we could predict image of the last destruction timestamp. This research was produced variation value according to growth of tree pattern. This result showed improved correction, when this research was applied image Processing. Pre-processing step of original image had good result binary work after high pass- filter execution. In the case of using partial discharge of the image, our research could predict the last destruction timestamp. By means of experimental data, this Prediction system was acquired ${\pm}$3.2% error range.

• KDI Journal of Economic Policy
• /
• v.46 no.1
• /
• pp.1-19
• /
• 2024

This paper evaluates explanations for China's growth slowdown. The natural tendency for rapidly growing economies to slow down is a major factor, along with problems bequeathed by unbalanced growth, including a declining ICOR, slowing total factor productivity growth, and rising indebtedness. A number of other mechanisms are of lesser importance: demographics, President Xi's centralization of political power and anti-corruption campaign, and U.S. export controls. Sustaining growth in the longer term will require China to step away from investment, debt and export-fueled growth in favor of a balanced growth model with household consumption playing a larger role. Doing so will require hardening of the budget constraints of regional and local governments and restructuring of the nonperforming debts of property and construction companies.

• KSBB Journal
• /
• v.32 no.2
• /
• pp.90-95
• /
• 2017

Mammalian cell cultures have been used extensively to produce proteins for therapeutic agent because of their ability to perform post-translational modification including glycosylation. To produce recombinant protein, many factors and parameter are considered such as media composition, host cell type, and culture process. In this study, recombinant human erythropoietin (rhEPO) producing cell line was established by using glutamine synthetase system. To reduce serum concentration in media, we compared direct adaptation with step adaptation. Cell growth was faster in step adaptation. In low-level serum media, there were insufficient glucose for cell growth. Thus, we added glucose in low-level serum media from 2 g/L to 4.5 g/L. Titer of rhEPO was higher than other conditions at 4.5 g/L of glucose. Additionally, N-methyl-D-aspartate (NMDA), 13-cis-retinal, and pluronic F-68 (PF-68) were added to enhance productivity in CHO cell cultures. In conclusion, we applied CHO cell producing rhEPO to low-level of serum in media using step-adaptation. Also, we confirmed positive effect of NMDA, 13-cis-retinal, and PF-68.