• Journal of Korean Society of Forest Science
• /
• v.103 no.1
• /
• pp.87-97
• /
• 2014

This study was conducted to provide field-based harvesting study information which can be used to select an optimal cable system for certain work conditions on steep grounds (> $20^{\circ}$ ground slope) in Korea. To accomplish this study objectives, we evaluated three cable yarding systems (RME-300T tower-yarder, Chuncheon tower-yarder, FARMI tractor winch) working in typical work conditions for their yarding productivity and operational efficiency. Those yarders are commonly used for removing logs or trees on steep grounds in Korea. Under the same work conditions (average DBH of tree to be cut, 20 cm; yarding distance, 60 m; lateral yarding distance, 10 m; and machine utilization rate, 70%), the average productivities were $33.04m^3$/day, $38.47m^3$/day, and $14.17m^3$/day for RME-300T, Chuncheon tower-yarder, and FARMI, respectively. Our standardized cost comparison study also showed that the yarding cost was highest at $37,835won/m^3$ with FARMI, followed by RME-300T at $25,105won/m^3$ for the same work conditions. We found the lowest yarding cost with the Chuncheon tower-yarder at $20,520won/m^3$ which was resulted primarily from high yarding productivity at the yarding distance (60 m). Our analysis suggested that a small machine such as FARMI could be a low-cost yarding machine option for a cable yarding job with a short yarding distance (40 m or less). The Chuncheon tower-yarder is well suited for a mid-range yarding distance job in Korea, ranged between 40 to 140 m. If yarding distance were longer than 140 m, the RME-300T tower yarder appears to be most cost-effective.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.41 no.4
• /
• pp.24-41
• /
• 2013

This study aims to investigate the complex planning processes and design ideas of the Gwanghwamun Plaza which was opened in 2009. The opening of the plaza was significant as it was built in order to restore the symbolic meaning of axis in the historical Joseon Dynasty that was distorted during the Japanese Imperialism. The plaza itself attracts many citizens and tourists by providing the empty ground carrying historical ambiences around. In this paper, the story of the Gwanghwamun plaza will be summarized. Particularly, the background of promoting the project will be discussed and the whole planning process will be dealt with. The plaza was realized through several stages. First, the planning stage will be reviewed. The planning stage had been a quite long process since the initial idea was discussed. Since the early 90s, the political decision of making the plaza was made through the change of people's understanding toward public space. At this stage, the city government worked together with diverse citizens and professionals to share the vision and to realize the right decision in making the plaza. Second, the design stage will be elaborated in detail. This is the second design stage. The former was the idea competition and the latter was the turn-key base. The final design scheme emphasized the restoration of symbolic axis and the forgotten Yukjo Street. The scheme consists of four zones such as history restoration zone, prospect and history representation zone, culture zone, and the urban zone. Through the whole design process, the original idea remained as it was. The design concept was "a place of memory and prospect." It emphasizes the history representation, view corridor, cultural activities platform as well as the emptiness and flexibility of the basic premise of the plaza. Finally, the construction stage will be discussed. There were some additions and omissions in the construction process. The design chances in the construction stage will be reviewed in detail. After the opening of the plaza, there were some changes in the detail design. We will discuss how and why these modifications were made. In the end, the social and cultural implication of the plaza will be discussed. The storytelling of the Gwanghwamun Plaza will contribute to the clear understanding of planning and design process of pubic places. Based on this reflection, we are able to think about some suggestions of public projects for the future.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.30 no.4
• /
• pp.1-13
• /
• 2012

Landscape Garden tradition of excellent examples of places that are focused on hydroponics management. South Korea and China, this thing was noticeable among them South Korea which emphasizes the natural contours of the natural streams in accordance with the basic idea to use examples that feature will do. Gardens in China by constructing a flat terrain also naturally expect to find examples of conscious ideas depending on the water and the mountains are characterized. These differences and similarities through the Gardens of the tradition of separating the two countries to build their Garden by site Soswaewon and Zolzengwon appear in the target hand is to identify the characteristics between the director. Research methods literature survey, field survey of the natural environment through the plantation, background history, the people who intend to study, to configure the ground water space, Jian, construction and management has been studied in hydroponics. As a result, Damyang-gun, Jeollanam-do, South Korea in the Garden of the Soswaewon(瀟灑園) organization with inner garden and outer garden of a small, but the scale of production to Yang San-Bo's 'eunilgwan' implement security based rock mooring takes the form of a linear channel and the water came down from riding pending to avoid artifacts gathered again took the form of streams flowing into that. Hutton was a rubble pile structure Jian. Building an Gwangpunggak, Jewoldang, as Daebongdae consist, respectively, depending on the purpose of the mooring was deployed by focusing. The other hand, is located at Suzhou, Jiangsu of China Zolzengwon(拙政園) flat terrain is located on. Largely divided eastern gardens, Central Gardens and the Gardens of the West was conducted by five thirds of the total area of Water accounted for. Pavilion the center of the pond, Seokgasan achieve a variety of landscapes and architectural features that are most of the Ming. The two countries, each region's natural environment and human environment, different, unique characteristics to each other in the implementation of a unique hydroponic Garden tube and ideological backgrounds, but especially the 'eunilgwan' and the terrain that is divided according to the conditions of this study, so fulfilling Garden was conducted.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.28 no.4
• /
• pp.85-97
• /
• 2010

This study analyzed the distribution, structure and environmental condition of the vegetation of the Chionanthus retusus Lindly et Paxton community at the Wansanchielbong in the Jeonju city to offer basic data for sustainable conservation and ecological management system. And the results are as follows; 1. The average pH of soil at the community was pH 5.69 and it was slightly higher than the average of forest soil pH of Korea. But if the degree of pH will be down, it will be needed some more fertilization of Calcium. 2. The total average for contents of organism was 4.98%. And the nitrate - nitrogen content(mg/kg) of A, B, C, D quadrat was 20.29%, 28.87%, 7.65%, and 23.3% respectively. And there were good condition except quadrat C which was contaminated by amount of earth and sand. 3. The flora of the Chionanthus retusus Lindly et Paxton community was listed as 60 taxa; 37 families, 50 genera, 47 species, 10 varieties and 3 forms. The average appearance species of each Quadrat were A sector 30, B sector 26, C sector 19 and D 19 taxa respectively. 4. Surveyed woody plants in the community were as follows : Chionanthus retusus, Zelkova serrata, Quercus variabilis, Cornus walteri, Robinia pseudo-acacia and those were mixed status. And Chionanthus retusus, Zelkova serrata, Robinia pseudo-acacia, Albizzia julibrisin, Cudrania tricuspidata, Symplocos chinensis for. pilosa were mixed in mid layer trees. Herbaceous plants were founded such as Chionanthus retusus, Zelkova serrata, Robinia pseudo-acacia, Grewia parviflora, Rosa multiflora, Trachelospermum asiaticum was dominant with 35~64% in the ground cover, and Commelina communis, Calamagrostis arundinacea, Dryopteris bissetiana, Lilium lancifolium were founded also. 5. The importance values of Chionanthus retusus was 40.2% in the quadrat A1, 50.2% at quadrat A, 50.0% B1, 45.2% B2, 22.4% C1, 73.6% C2, 33.2% D1 and the total average of I.V. was 44.9%. 6. The average height of surveyed Chionanthus retusus was 5.7m and the average DBH was 12.4cm. The number of trees higher than 2m were 107 and the number of trees lower than 2m were 63. The total numbers of Chionanthus retusus were 170. 7. The age of surveyed Chionanthus retusus were analyzed 42 thru 87 years old and that of Zelkova serrata were 42, Quercus variabilis were 60, Quercus aliena were 48, Robinia pseudo-acacia were 40. 8. The number of trees with DBH 40 through 50cm were 6, and that of 30~39cm were 3, and that of 20~29cm were 16, so the total number that was over 20cm was 25. And there were 70 trees under 10cm of DBH and 63 seedlings. It will be very important data to conserve the habitat that the structure and environmental condition of the Chionanthus retusus Lindly et Paxton community at the Wansanchielbong was stable, and sustainable monitoring will be needed. Now that community is nurse forest of Jeonju City but more positive preservation plan will be needed and assigning monument of city or province also be necessary.

• Restorative Dentistry and Endodontics
• /
• v.31 no.4
• /
• pp.263-268
• /
• 2006

Recently, self-etching adhesive system has been introduced to simplify the clinical bonding proce- dures. It is less acidic compared to the phosphoric acid, thus there is doubt whether this system has enough bond strength to enamel. The purpose of this study was to investigate the influence of additional etching on the adhesion of resin composite to enamel. Ninety extracted bovine permanent anterior teeth were used. The labial surfaces of the crown were ground with 600-grit abrasive paper under wet condition. The teeth were randomly divided into six groups of 15 teeth each. Clearfil SE $Bond^{\circledR},\;Adper^{TM}$ Prompt L-Pop and Tyrian $SPE^{TM}$ were used as self-etching primers. Each self-etching primers were applied in both enamel specimens with and without additional etching. For additional etching groups, enamel surface was pretreated with 32% phosphoric acid (UNI-ETCH, Bisco, Inc., Schaumburg, IL. USA). Hybrid resin composite Clearfil AP-X, (Kuraray Co., Ltd., Osaka, Japan) was packed into the mold and light-cured for 40 seconds. Twenty-four hours after storage, the specimens were tested in shear bond strength. The data for each group were subjected to independent t - test at p < 0.01 to make comparisons among the groups. In Clearfil SE $Bond^{\circledR}$, shear bond strength of additional etching group was higher than no additional etching group (p < 0.01). In $Adper^{TM}$ Prompt L-Pop and Tyrian SPE, there were no significant difference between additional etching and non-etching groups (p > 0.01). In conclusion, self-etching adhesive system with weak acid seems to have higher bond strength to enamel with additional etching, while self-etching adhesive system with strong acid seems not.

• Restorative Dentistry and Endodontics
• /
• v.31 no.4
• /
• pp.312-322
• /
• 2006

The objectives of this study were to evaluate the effect of surface roughness on the surface color and translucency of the composite resins. Two composite resins (Esthet-X, Dentsply, Milford, USA and Charisma, Kulzer, Domagen, Germany) were used to investigate the surface color. Charisma was used to investigate the translucency. 40 disc samples (diameter: 8 mm, thickness: 5 mm) were made by each product to measure the surface color. Polymerized each sample's one side was treated by Sof-Lex finishing and polishing system (Group C, M, F, SF). 40 disc samples (diameter: 6 mm, thickness: 1 mm) were prepared to measure the opacity. 1 mm samples were ground one side with #600, #1000, #1500 and #2000 sandpapers. CIE $L^{*}a^{*}b^{*}$ values of each 5 mm thickness samples, and XYZ values of 1 mm thickness samples on the white and black background were measured with spectrophotometer (Spectrolino, GretagMacbeth, Regensdorf, Switzerland). Mean surface roughness (Ra) of all samples before and after surface treatment was measured using the Surface Roughness Tester SJ-301 (Mytutoyo, Tokyo, Japan). Regardless of type and shade of the composite resin, $L^{*}$ values measured in group C were higher than others (p < 0.05), and $L^{*}$ value decreased as the Ra value decreased except B3 shade of Esthet-X. But there were no significant difference in $a^{*}$ values among groups. In control group and SF, highest $b^{*}$ values were measured (p < 0.05), except B1 shade of Esthet-X. Contrast ratio decreased as the Ra value decreased (p < 0.05). With the above results, difference of surface roughness has influence on surface color and translucency of dental composite resins.

• Restorative Dentistry and Endodontics
• /
• v.24 no.2
• /
• pp.299-309
• /
• 1999

The composite resin, due to its esthetic qualities, is considered the material of choice for restoration of anterior teeth. With respect to shade control, the direct-placement resin composites offer some distinct advantages over indirect restorative procedures. Visible-light-cured (VLC) composites allow dentists to match existing tooth shades or to create new shades and to evaluate them immediately at the time of restoration placement. Optimal intraoral color control can be achieved if optical changes occurring during application are minimized. An ideal VLC composite, then, would be one which is optically stable throughout the polymerization process. The shade guides of the resin composites are generally made of plastic, rather than the actual composite material, and do not accurately depict the true shade, translucency, or opacity of the resin composite after polymerization. So the numerous problems associated with these shade guides lead to varied and sometimes unpredictable results. The aim of this study was to assess the color changes of current resin composite restorative materials which occur as a result of the polymerization process and to compare the color differences between the shade guides provided with the products and the actual resin composites before- and after-polymerization. The results obtained from this investigation should provide the clinician with information which may aid in improved color match of esthetic restoration. Five light activated, resin-based materials (${\AE}$litefil, Amelogen Universal, Spectrum TPH VeridonFil-Photo, and Z100) and shade guides were used in this study. Three specimens of each material and shade combination were made. Each material was condensed inside a 1.5mm thick metal mold with 10mm diameter and pressed between glass plates. Each material was measured immediately before polymerization, and polymerized with Curing Light XL 3000 (3M Dental products, USA) visible light-activation unit for 60 seconds at each side. The specimens were then polished sequentially on wet sandpaper. Shade guides were ground with polishing stones and rubber points (Shofu) to a thickness of approximately 1.5mm. Color characteristics were performed with a spectrophotometer (CM-3500d, Minolta Co., LTD). A computer-controlled spectrophotometer was used to determine CIELAB coordinates ($L^*$, $a^*$ and $b^*$) of each specimen and shade guide. The CIELAB measurements made it possible to evaluate the amount of the color difference values (${\Delta}E{^*}ab$) of resin composites before the polymerization process and shade guides using the post-polishing color of the composite as a control, CIE standard D65 was used as the light source. The results were as follows. 1. Each of the resin composites evaluated showed significant color changes during light-curing process. All the resin composites evaluated except all the tested shades of 2100 showed unacceptable level of color changes (${\Delta}E{^*}ab$ greater than 3.3) between pre-polymerization and post-polishing state. 2. Color differences between most of the resin composites tested and their corresponding shade guides were acceptable but those between C2 shade of ${\AE}$litefil and IE shade of Amelogen Universal and their respective shade guides exceeded what is acceptable. 3. Comparison of the mean ${\Delta}E{^*}ab$ values of materials revealed that Z100 showed the least overall color change between pre-polymerization and post-polishing state followed by ${\AE}$litefil, VeridonFil-Photo, Spectrum TPH, and Amelogen Universal in the order of increasing change and Amelogen Universal. Spectrum TPH, 2100, VeridonFil-Photo and ${\AE}$litefil for the color differences between actual resin and shade guide. 4. In the clinical environment, the shade guide is the better choice than the shade of the actual resin before polymerization when matching colors. But, it is recommended that custom shade guides be made from resin material itself for better color matching.

• The Journal of Engineering Geology
• /
• v.14 no.1
• /
• pp.29-46
• /
• 2004

It is important to identify geometries of fracture that act as a conduit of fluid flow for characterization of ground water flow in fractured rock. Fracture geometries control hydraulic conductivity and stream lines in a rock mass. However, we have difficulties to acquire whole geometric data of fractures in a field scale because of discontinuous distribution of outcrops and impossibility of continuous collecting of subsurface data. Therefore, it is needed to develop a method to describe whole feature of a target fracture geometry. This study suggests a new approach to develop a method to characterize on the whole feature of a target fracture geometry based on the Fourier transform. After sampling of specimens along a target fracture from borehole cores, effective frequencies among roughness components were selected by the Fourier transform on each specimen. Then, the selected effective frequencies were averaged on each frequency. Because the averaged spectrum includes all the frequency profiles of each specimen, it shows the representative components of the fracture roughness of the target fracture. The inverse Fourier transform is conducted to reconstruct an averaged whole roughness feature after low pass filtering. The reconstructed roughness feature also shows the representative roughness of the target subsurface fracture including the geometrical characteristics of each specimen. It also means that overall roughness feature by scaling up of a fracture. In order to identify the characteristics of permeability coefficients along the target fracture, fracture models were constructed based on the reconstructed roughness feature. The computation of permeability coefficient was performed by the homogenization analysis that can calculate accurate permeability coefficients with full consideration of fracture geometry. The results show a range between $10^{-4}{\;}and{\;}10^{-3}{\;}cm/sec$, indicating reasonable values of permeability coefficient along a large fracture. This approach will be effectively applied to the analysis of permeability characteristics along a large fracture as well as identification of the whole feature of a fracture in a field scale.

• The Journal of Engineering Geology
• /
• v.18 no.4
• /
• pp.415-422
• /
• 2008

Pumping test was conducted to understand hydraulic conductivity for leaky confined aquifer with high permeability. Test aquifer was formed in $25{\sim}35\;m$ below ground surface at predetermined site of riverbank filtration which junction of Nakdong river and Milyang river in the Ttaan isle, Gimhae city, Korea Monitoring wells were located at intervals of 2 m and 5 m from pumping well in south-west direction (MW1 and MW2 wells) and northeast direction (MW3 and MW4 wells), respectively. Pumping test was continuously conducted for constant pumping rate of $2,500m^3/day$, hydraulic conductivity was estimated using AQTESOLV 3.5 program. Hydraulic conductivity were estimated to be $1.745{\times}10^{-3}m/sec$ for pumping well (PW), $2.452{\times}10^{-3}m/sec$ for between PW and MW1 wells, $2.161{\times}10^{-3}m/sec$ for between PW and MW2 wells, $2.270{\times}10^{-3}m/sec$ for between PW and MW3 wells and $2.591{\times}10^{-3}m/sec$ for between PW and MW4 wells. The function of hydraulic conductivity (K) as monitoring distance (d) were estimated to be logK = 0.0693logd - 2.671 for south-west direction (PW-MW1-MW2 line), logK = 0.0817logd - 2.655 for north-east direction (PW-MW3-MW 4 line). Scale exponent of hydraulic conductivity as test volume was estimated using Schulze-Makuch et al.(1999) method. Scale exponent of this aquifer was estimated to be 0.15. It means that test aquifer has very low heterogeneity. The radius of influence estimated using transmissivity, maximum groundwater level displacement, distance from pumping well and pumping rate during pumping test were 7.148 m for south-west direction and 6.912 m for north-east direction. The increasing rate of hydraulic conductivity from pumping well to maximum radius of influence were estimated to be 1.40 times for south-west direction and 1.49 times for north-east direction. Thus, heterogeneity of test aquifer was a little higher in north-east direction.

• Cartoon and Animation Studies
• /
• s.36
• /
• pp.437-467
• /
• 2014

This study is intended to reveal reading comic books helps improve creativity. Though the long-lasting negative recognition towards comic books has positively changed these days, we need a ground upon which the social recognition needs improvement in that children's comic books have been used as a learning tool. Its introduction points out that there has been shortage of empirical researches on comic book reading, and as one of the empirical research methods, presents a method of comparative analysis on comic book reading, school study, and creativity tests via survey. The theoretical background in the 2nd chapter, first, puts emphasis on the significance of the creativity theory among all the other theories related to creativity, which focuses on problem-solving capacity. Second, it theoretically reviews the meaning which 'fun' and 'interest' have in development of creativity in the context of developmental process of the modern educational theories. Third, it empathizes that traits of reading comic books start off with 'fun' and 'interest', that awareness of reality gets expanded via the process of characters making their way through a strange world with empathy and absorption, and that comic book reading has to do with creativity. Fourth, it presents a model questionnaire with which to study relationship between comic books and creativity in an empirical way. The analysis on the survey outcome in the 3rd chapter shows, first, that smart students read many comic books, not to mention that studying helps improve creativity, which indicates above all, comic book reading and improvement of creativity are not negatively related, but are mutually complementary. Second, that creativity enhanced by reading comic books is higher than that enhanced by studying, which may mean comic book reading is more effective than studying in developing creativity. It has drawn a conclusion based upon these results, that reading comic books bears positive efficacy on both studying and developing creativity. Standing on this conclusion, it proposes it necessary to develop methods by grades of educating how to read comic books and to provide a recommended list of comic books to read.