• 제목/요약/키워드: granulated blast furnace slag

검색결과 446건 처리시간 0.022초

Strength characteristics of granulated ground blast furnace slag-based geopolymer concrete

  • Esparham, Alireza;Moradikhou, Amir Bahador;Andalib, Faeze Kazemi;Avanaki, Mohammad Jamshidi
    • Advances in concrete construction
    • /
    • 제11권3호
    • /
    • pp.219-229
    • /
    • 2021
  • In recent years, geopolymer cements, have gained significant attention as an environmental-friendly type of cement. In this experimental research, effects of different alkaline activator solutions and variations of associated parameters, including time of addition, concentration, and weight ratio, on the mechanical strengths of Granulated Ground Blast Furnace Slag (GGBFS)-based Geopolymer Concrete (GPC) were investigated. Investigation of the effects of simultaneous usage of KOH and NaOH solutions on the tensile and flexural strengths of GGBFS-based GPC, and the influence of NaOH solution addition time delay on the mechanical strengths is among the novel aspects investigated in this research. four series of mix designs and corresponding specimen testing is conducted to study different parameters of the active alkali solutions on GPC mechanical strengths. The results showed that addition of NaOH to the mix after 3 min of mixing KOH and Na2SiO3 with dry components (1/3 of the total mixing duration) resulted in the highest compressive, tensile and flexural strengths amongst other cases. Moreover, increasing the KOH concentration up to 12 M resulted in the highest compressive strength, while weight ratio of 1.5 for Na2SiO3/KOH was the optimum value to achieve highest compressive strengths.

고로슬래그 혼입율에 따른 CA계 기포콘크리트의 강도특성 (Strength Properties of Calcium-aluminate based Foamed Concrete according to Replacement Ratio of GGBFs)

  • 유재성;최선미;최홍범;이무;김진만
    • 한국건축시공학회:학술대회논문집
    • /
    • 한국건축시공학회 2016년도 추계 학술논문 발표대회
    • /
    • pp.39-40
    • /
    • 2016
  • The aim of this research was evaluating strength characteristics of foamed concrete using Ladle Furnace slag with GGBFs. For all mixtures, because of the early setting and strength development, it was possible to deform the formwork and measure the compressive strength within 3 hours.

  • PDF

고로슬래그 미분말을 대량 사용한 콘크리트의 건조수축 및 중성화에 관한 실험적 연구 (An Experimental Study on the Carbonation and Drying Shrinkage of Concrete Using High Volumes of Ground Granulated Blast-furnace Slag)

  • 류동우;김우재;양완희;박동철
    • 한국건축시공학회지
    • /
    • 제12권4호
    • /
    • pp.393-400
    • /
    • 2012
  • 본 연구에서는 고로슬래그의 치환율이 80% 이상에 이르는 슬래그 대량 치환 콘크리트(High Volume Slag Concrete, HVSC)의 개발을 목표로 응결특성, 압축강도, 건조수축 및 중성화 저항성에 미치는 고로슬래그 치환율의 영향 및 알칼리 자극제의 효과에 대해 평가하였다. 고로슬래그 미분말의 치환율 증가에 따른 시험결과는 다음과 같다. 응결시간은 초결 및 종결 도달시간이 약 2~2.5 시간 지연되는 것으로 나타났으며 압축강도 발현특성은 초기 및 장기의 모든 재령에서 감소하였다. 건조수축은 치환율에 따른 뚜렷한 경향을 나타내지 않았으며 모든 배합에서 $6{\times}10^{-4}$ 이하의 값을 보여 매우 양호한 것으로 나타났다. 중성화는 현저히 증가하는 경향을 나타냈다. 한편 알칼리 자극제의 첨가에 따른 응결시간 및 초기강도 발현특성은 현저히 개선되었으며 건조수축에 기여하는 효과가 큰 것으로 나타났다. 반면 중성화 저항성에 미치는 영향은 크지 않은 것으로 나타났다.

고로슬래그 미분말을 이용한 SBR혼입 폴리머 시멘트 콘크리트의 강도특성 (Strength Properties of SBR-Modified Concretes Using Ground Granulated Blast-Furnace Slag)

  • 주명기;연규석
    • 콘크리트학회논문집
    • /
    • 제14권3호
    • /
    • pp.315-320
    • /
    • 2002
  • 본 연구에서는 고로슬래그 미분말을 이용한 SBR혼입 폴리머 시멘트 콘크리트의 강도 성상에 미치는 고로슬래그 치환율 및 폴리머 결합재비의 영향에 대하여 구명하였다. 그 결과, 고로슬래그 미분말을 이용한 SBR혼입 폴리머 시멘트 콘크리트의 압축, 인장 및 휨강도는 폴리머-결합재비 및 고로슬래그 치환율의 증가에 따라 증가하였으며, 고로슬래그 치환율 40%에서 가장 높은 강도를 나타내었다. 특히 고로슬래그 치환율 40%의 SBR혼입 폴리머 시멘트 콘크리트의 인장 및 휨강도는 폴리머 미혼입의 강도보다 약 2배 이상의 높은 강도를 보였다. 이와 같이 높은 강도의 발현은 SBR 폴리머의 높은 인장강도와 SBR라텍스의 혼입에 의한 시멘트 수화물과 골재간의 접착성이 개선되었기 때문이라 판단된다.

Development of slag based Shirasu geopolymer

  • Katpady, Dhruva Narayana;Takewaka, Koji;Yamaguchi, Toshinobu
    • Computers and Concrete
    • /
    • 제20권1호
    • /
    • pp.77-84
    • /
    • 2017
  • Shirasu, a pyroclastic flow deposit, showed considerable performance as aluminosilicate source in geopolymer, based on past research. However, the polymerization reactivity was somewhat lower compared to the traditional fly ash based geopolymer even though the long-term strength was fairly good. The present study concentrates on the development of higher initial strength performance of Shirasu based geopolymer by utilizing ground granulated blast furnace slag as an admixture. Mortars with various mix proportions were adopted to study the effect of parametric changes on strength development along with the addition of slag in different percentages. A combination of sodium hydroxide and sodium silicate was used as alkaline activators considering parameters like molar ratios of alkali to geopolymer water and silica to alkali molar ratio. The mortars were cured at elevated temperatures under different curing conditions to analyze the effect on strength development. Compressive strength test, mercury intrusion porosimetry and X-ray powder diffraction were carried out to assess the strength performance and microstructure of slag-Shirasu based geopolymer. Based on the experimental study, it was observed that the initial and long-term strength development of Slag-Shirasu geopolymer were improved by the addition of slag.

조강슬래그시멘트를 이용한 콘크리트의 기초물성에 관한 연구 (A fundamental Study on the properties of Concrete by using the Rapid Hardening Blast Furnace Slag Cement)

  • 김진춘;최광일
    • 한국콘크리트학회:학술대회논문집
    • /
    • 한국콘크리트학회 1995년도 봄 학술발표회 논문집
    • /
    • pp.72-77
    • /
    • 1995
  • Blast-furnace slag cement has been used widely as a structural material due to the latent hydraulicity of granulated ground blast furnace slag(GGBS)for a long time as The wall as ordinary portland cement. In this study, based on the fundamental investigation on the high strength and high durable concrete using the high fineness GGBS the following remarks can be made. 1) The average desired strenth of concrete is Or=600~800kg/$\textrm{cm}^2$. 2) The above high strength concrete using the high fineness GGBS is more workable than those using only OPC. 3) The adiabatic temperature and drying shringkage decrease, so the density and resistance to sea water attack increase as results. 4)The unit cement content and unit air entrained admixture at the same desired strength of concrete decrease, so the economical high strength concrete can be manufactured from using the high fineness GGBS.

  • PDF

플라이애쉬 및 고로슬래그를 치환한 라텍스 개질 콘크리트의 중성화 특성 (The Carbonation Property of Latex Modified Concretes with Fly ash and Blast Furnace Slag)

  • 정원경;홍창우;김경진;심도식;윤경구
    • 한국콘크리트학회:학술대회논문집
    • /
    • 한국콘크리트학회 2006년도 춘계 학술발표회 논문집(II)
    • /
    • pp.569-572
    • /
    • 2006
  • This study was performed to investigate the characteristics of carbonation for latex modified concrete with fly ash and blast furnace slag. The experimental variables consisted of ground granulated blast-furnace slag contents (0%, 30%, 50%), fly ash contents (0, 30%) latex contents (0, 5, 10, 15%). Two different methods of carbonation test such as $CO_2$ gas and 5% sulphuric acid digestion resistance test were varied in this study.

  • PDF

고강도용 콘크리트의 온도상승 억제를 위한 고로슬래그 미분말의 효과 (The Effect of Ground Granulated Blast-Furnace Slag on the Control of Temperature Rising in High Strength Concrete)

  • 문한영;최연왕
    • 콘크리트학회지
    • /
    • 제10권4호
    • /
    • pp.195-204
    • /
    • 1998
  • 콘크리트가 고강도를 확보하기 위해서는 일반적으로 큰 단위시멘트량 및 낮은 물-시멘트비를 유지해야 하므로 콘크리트 타설후 내부온도 상승은 필연적이며, 구조물의 위치와 온도응력차에 의하여 콘크리트 구조물에 균열이 발생하게 된다. 그러므로 고강도용 콘크리트의온도상승 억제대책의 한 방안으로 고로슬래그미분말 3종류와 혼합률 4단계로 변화시킨 콘크리트를 제조하여 온도상승량과 최고온도 도달시간 및 강도를 측정하였으며, 고로슬래그미분말을 5단계로 혼합한 페이스트의 수화발열량 및 수화속도를 측정한 값에 대하여 고찰하였다. 본 연구결과 고로슬래그미분말의 분말도 6,000$\textrm{cm}^2$/g, 혼합률 50% 정도인 고강도용 콘크리트가 온도상승 억제효과 뿐만 아니라 조기재령에서의 강도도 비교적 잘 만족하였다.

고로슬래그미분말 및 강섬유를 적용한 고유동 흙막이 벽체 재료의 성능 평가 (Performance of High-Flowable Retaining Wall Material Using Ground Granulated Blast-Furnace Slag and Steel Fiber)

  • 김동규;유강민;이승태
    • 한국지반환경공학회 논문집
    • /
    • 제23권11호
    • /
    • pp.5-11
    • /
    • 2022
  • 본 연구는 고로슬래그미분말(SG) 및 강섬유(SF)를 적용한 고유동 흙막이 벽체 재료(RWM)의 역학적 성능을 평가하기 위한 것으로써, 흙막이 벽체 재료의 재료분리저항성, 유동성, 연행공기량을 확보하기 위하여 고성능감수제, 공기연행제 및 증점안정화제를 굳지 않은 흙막이 벽체 재료에 적정량을 사용하였다. 흙막이 벽체 재료 경화체의 강도특성을 고찰하기 위하여 압축, 할열 인장 및 휨강도를 소정의 재령에서 측정하였으며, 표면전기저항, 흡수율 실험을 통하여 흙막이 벽체 재료의 역학적 성능을 평가하였다. 실험결과에 따르면 SGC 배합은 OPC 배합에 비하여 대체적으로 우수한 성능을 나타내었으며, SF는 흙박이 벽체 재료의 역학적 성능향상에 효과적인 것으로 조사되었다. 특히, SG의 사용은 흙막이 벽체 재료의 장기강도 발현 뿐만 아니라 차수성능 향상에 기여할 것으로 판단된다.

플라이 애시와 고로슬래그 미분말의 복합사용한 콘크리트의 내구성능 향상 효과 (Combined Effect of Fly Ash and Granulated Blast Furnace Slag on Durability Performance)

  • 이창수;설진성;윤인석;박종혁
    • 한국콘크리트학회:학술대회논문집
    • /
    • 한국콘크리트학회 2002년도 가을 학술발표회 논문집
    • /
    • pp.23-26
    • /
    • 2002
  • Ternary blended concrete containing both fly ash and granulated blast furnace slag is initial cost effective, and environment friendly. Furthermore, it has many technical advantages such as improvement of long term compressive strength, rheology property, reduction of hydration heat, etc. However, use and data on the performance of ternary blended concrete are limited, and it is necessary to study on the adoption of this technology. This study examined the durability performance of ternary blended concrete comparing with binary blended concrete and ordinary portland concrete. From the results of this study, it was concluded that ternary blended concrete is very suitable to submerged zone under maine environment.

  • PDF