• 한국환경보건학회지
• /
• 제44권4호
• /
• pp.360-369
• /
• 2018

Objectives: Outdoor tobacco smoke can penetrate into the indoor environment through cracks in the building envelope. This study aimed to characterize the particle size distribution of infiltrated secondhand smoke (SHS) through the gap in a single glazed and a secondary glazed window according to pressure differences in a chamber. Methods: Two polyvinyl chloride sliding windows were evaluated for infiltration, one with a glazed window and the other with a secondary glazed window. Each window was mounted and sealed in a polycarbonate chamber. The air in the chamber was discharged to the outside to establish pressure differences in the chamber (${\Delta}P$). Outdoor smoking sources were simulated at a one-meter distance from the window side of the chamber. The particle size distribution of the infiltrated SHS was measured in the chamber using a portable aerosol spectrometer. The particle size distribution of SHS inside the chamber was normalized by the outdoor peak for fine particles. Results: The particle size distribution of SHS inside the chamber was similar regardless of window type and ${\Delta}P$. It peaked at $0.2-0.3{\mu}m$. Increases in particulate matter (PM) concentrations from SHS infiltration were higher with the glazed window than with the secondary glazed window. PM concentrations of less than $1{\mu}m$ increased as ${\Delta}P$ was increased inside the chamber. Conclusions: The majority of infiltrated SHS particles through window gap was $0.2-0.3{\mu}m$ in size. Outdoor SHS particles infiltrated more with a glazed window than with a secondary glazed window. Particle sizes of less than $1{\mu}m$ were associated with ${\Delta}P$. These findings can be a reference for further research on the measurement of infiltrated SHS in buildings.

• 동남아시아연구
• /
• 제21권2호
• /
• pp.329-358
• /
• 2011

The pottery and porcelain of Myanmar is very various such as Celadon, Black glazed large Jar and White galzed Jar painted Green Colour. In these Myanmarese Ceramics, Black glazed large Jar is very important to understand the Character and Role of Myanmar Ceramics. The description on the Black glazed large Jar of Myanmar is seen in several Books such as a travel essay of Ibun Battuta, Duarte Barbosa, The book of Duarte Barbosa: A Account of the Contries Bordering on the Indian Ocean and their Inhabitants, Jan Huygen van Linschoten, Volker, T., Porcelain and the Dutch East India Company These descriptions on the Black glazed Jar in these Books are important evidence to discovery the existence of it and its Types and Price and Use. The appearance of Black glazed Jar of Myanmar is considered in the Middle of 14C with the description of the Book of Ibn Battuta. Furthermore, Excavated from the Shipwreck of China in the Sinan, Chellanamdo, it is certain that the Black glazed large Jar was already existed in the early of 14C. And it was considered that the Shipwreck of China in the Sinan, Chellanamdo was started from Ninbo(寧波) of China to the destination of Japan with the Inscrition made Bamboo. So we know that The route of $Ninbo{\rightarrow}Korea{\rightarrow}Japan$ is very important in the Trade Ceramics of East Asia in 14C. And The size of Black glazed Jar has 3 types, Large, Middle and Small. The large type is used as a Tools for Water and Oil. The small type is the personal bottle for drinking. The Price of Black glazed Jar of Myanmar was changed as times go by. The price of the late of 16C and the early of 17C is 30 prolin and the late of 17C is 8 Prolin. The price of the Black glazed Jar of Myanmar in the late of 16C and the early of 17C is estimated 3 times for the price of the late of 17C. and This change of the price of Myanmarese Black Glazed Jar is decided on the Demand and Supply. and the Black glazed Jar of Myanmar was mainly used for the tools for Morpin in the year of 1620 and for Salt and Sugar in the year of 1640 and for Water and Oil in the late of 17C.

• International Journal of Automotive Technology
• /
• 제3권4호
• /
• pp.171-176
• /
• 2002

A bench test set-up is employed to simulate the friction characteristics of a paper-based friction material operating against a steel plate. Dry friction tests are run as well as tests with transmission fluids. Glazed friction material produces a negative coefficient of friction versus sliding velocity (f-v) curve for both dry friction and lubrication with transmission fluids. At low sliding speeds, the coefficient of friction when operating in transmission fluids for glazed friction materials is greater than that under dry friction. An appreciable negative f-v slope occurs at low sliding speeds for glazed friction materials when running with the transmission fluid. The friction material after running in produces a constant f-v curve under dry friction and a negative slope when lubricated with transmission fluid. At low sliding speeds, the coefficient of friction of the run-in friction material is lower than that of the glazed wet material. On the other hand, the run-in friction material has a larger friction coefficient than does the glazed friction material at higher sliding speeds.

• KIEAE Journal
• /
• 제9권4호
• /
• pp.37-42
• /
• 2009

Photovoltaic-thermal(PVT) collectors are a combination of photovoltaic modules with solar thermal collectors, forming one device that receives solar radiation and produces electricity and heat simultaneously. The PVT collectors can produce more energy per unit surface area than side by side PV modules and solar thermal collectors. There are two types of water type PVT collectors, depending on the existence of glass cover over PV module; glass-covered(glazed) PVT module, which produces relatively more thermal energy but has lower electrical yield, and uncovered(unglazed) PVT module, which has relatively lower thermal energy with somewhat higher electrical performance. In this paper, the experimental performance of two types of the water-based PVT combined collectors, glazed and unglazed, was analyzed. The electrical and thermal performances of the PVT combined collectors were measured in outdoor conditions, and the results were compared.

• 설비공학논문집
• /
• 제9권4호
• /
• pp.484-496
• /
• 1997

The fluid flow and heat transfer characteristics of conjugate forced and natural convection in the triple-glazed airflow window, where the outer air passes through a space contrived between the interior and exterior window panes, were studied numerically by a finite volume method for the elliptic form of the Navier-Stokes equations. The investigation focused on the influence of window geometry, ventilastion rate and solar energy on the temperature, velocity distribution and thermal performance of the airflow window. The comparison between the triple-glazed airflow window and the enclosed triple-glazed window was also made to evaluate the effect of buoyancy upon which the thermal performance of the window depended.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2010년도 추계학술대회 초록집
• /
• pp.64.2-64.2
• /
• 2010

The objective of this study is to make a comparative study of the operation performance of different type of solar collectors. A flat-plate collector, a single-glazed evacuated collector and a double-glazed evacuated collector are used in this study. These 3 type of collectors are connected in series in the order of a flat-plate collector, a single-glazed evacuated collector and a double-glazed evacuated collector. This experimental facility is a kind of a solar system with a controller, a heat exchanger, a storage tank and a circulation pump. Each collector has a different collection area(flat-plate collector-$6.00m^2$ total area/$5.61m^2$ aperture area, double-glazed evacuated collector-$6.04m^2$ total area/$4.92m^2$ aperture area, single-glazed evacuated collector-$7.65m^2$ total area/$5.61m^2$ aperture area) and its performance characteristic respectively. The experiments have been demonstrated at around $70^{\circ}C$ operating temperature(flat-plate collector inlet temperature). The thermal collecting efficiencies of each collector are obtained under the different insolation and operation condition as a result.

• 대한치과보철학회지
• /
• 제34권2호
• /
• pp.246-265
• /
• 1996

After adjusting glazed surface of laminate veneer porcelain by reduction in the clinical procedure, an additional polishing procedure is required to smoothen the roughened surface by reduction, as it is difficult to glaze it again in the furnace. In this study, four kinds of laminate veneer porcelain were ground with diamond points as done in the clinical procedure. The adjusted porcelain surface was polished with Durawhite stone, Ceramiste points, Exa cerapol, Porcelain polishing wheel, Diamond polishing paste. The degree of surface roughness was evaluated with SEM and profilometer at each step, The self glazed surface and the glazed surface with glazing powder were compared with the polished surface and surface roughness of four kinds of laminate veneer porcelain according to the polishing method and step were obserbed. The following results were obtained : 1. There was no difference in the average surface roughness Ra value and the surface roughness obserbed under SEM according to the polishing methods and steps used, among the four kinds of laminate veneer porcelain including Colorlogic, Exelco, Vintage, and Vitadur alpha product. 2. Due to porosities, the surface in the course of polishing by polishing instruments was rougher than the glazed surface, evaluated with a SEM. 3. Insta-Glaze diamond polishing paste has no statistical difference with self glazed group 1, although it has a lower value in average surface roughness Ra value. 4. Group 2 which was glazed with galzing powder was lowest in view of SEM, but it revealed higher surface roughness Ra value than group 1, the glazed surface and group 8, polished by diamond polishing paste, due to surface waveness. 5. Proper surface smoothness could not be in the surface roughness analysis of SEM and profilometer by Shofu laminate polishing kit composed of Diamond point, Durawhite stone and Ceramiste points. Based on the results of this study, the following conclusions can be drawn. We obtain low surface roughness than glazed surface by polishing instruments, but not perfect results clinically. In order to obtain a perfect clinical result or a surface smoothness comparable to glazed porcelain there is a need for further improvement of porcelain materials, condensa-tion techniques, polishing instruments and polishing methods. Furthermore card should be taken not to breakdown the glazed surface during the clinical and laboratory procedure.

• 대한치과교정학회지
• /
• 제45권6호
• /
• pp.299-307
• /
• 2015

Objective: The aims of this study were to compare the shear bond strength between orthodontic metal brackets and glazed zirconia using different types of primer before applying resin cement and to determine which primer was more effective. Methods: Zirconia blocks were milled and embedded in acrylic resin and randomly assigned to one of four groups: nonglazed zirconia with sandblasting and zirconia primer (NZ); glazed zirconia with sandblasting, etching, and zirconia primer (GZ); glazed zirconia with sandblasting, etching, and porcelain primer (GP); and glazed zirconia with sandblasting, etching, zirconia primer, and porcelain primer (GZP). A stainless steel metal bracket was bonded to each target surface with resin cement, and all specimens underwent thermal cycling. The shear bond strength of the specimens was measured by a universal testing machine. A scanning electron microscope, three-dimensional optical surface-profiler, and stereoscopic microscope were used to image the zirconia surfaces. The data were analyzed with one-way analyses of variance and the Fisher exact test. Results: Group GZ showed significantly lower shear bond strength than did the other groups. No statistically significant differences were found among groups NZ, GP, and GZP. All specimens in group GZ showed adhesive failure between the zirconia and resin cement. In groups NZ and GP, bonding failed at the interface between the resin cement and bracket base or showed complex adhesive and cohesive failure. Conclusions: Porcelain primer is the more appropriate choice for bonding a metal bracket to the surface of a full-contour glazed zirconia crown with resin cement.

• 미술자료
• /
• 제100권
• /
• pp.82-110
• /
• 2021

이 연구는 건요의 "공어"·"진잔"명흑유완과 관련된 핵심적인 주제 가운데 하나인 그 제작시기 문제를 구체적으로 검토한 것이다. 필자는 주로 기형적(器形的) 측면에서 "공어"·"진잔"명흑유완의 특징을 제대로 파악한 후, 이러한 분석을 토대로 그것이 같은 유형의 건요 흑유완의 전개과정에서 시간적으로 어느 위치에 있는지를 추적함으로써, 이 문제를 밝히려고 하였다. 이 연구에서 도달한 대략적인 결론은 다음과 같다. 건요에서는 다양한 기형의 흑유완을 제작하였지만, "공어"명이나 "진잔"명은 거의 다 특정한 유형의 완, 즉 I형 속구완(束口碗)이나 II형 별구완(撇口碗)에서만 확인된다. 이 가운데에서도 전자의 비율이 월등하게 높다. "공어"명이나 "진잔"명이 있는 I형 흑유속구완의 경우, 모두 구부(口部)가 짧게 외반(外反)되었으며, 측사면의 경사각은 대략 50° 전후이다. 구연으로부터 0.3~0.5cm가량 아래에 속구(束口)가 이루어져 있다. 그리고 이것들은 건요의 I형 흑유속구완들 가운데에서는 비교적 운두가 낮은 편이어서, 그 높이/구경의 값이 0.5 이하이다. "공어"명흑유완과 "진잔"명흑유완 사이에 기형적인 측면에서의 차이는 거의 없다. 다만 양자의 출토상황 등으로 미루어 볼 때, 전자가 제작시기에 있어서 후자보다 앞서는 것으로 판단된다. 한편, "공어"·"진잔"명이 있는 I형 흑유속구완과 같은 기형적 특징을 가진 건요 흑유완은 같은 유형의 전형적인 건요 흑유속구완이 출토되는 12세기 말기~13세기 초기의 기년묘(紀年墓)에서는 발견되지 않는다. 일본의 하카타유지(博多遺址)의 경우, 그러한 기형적 특징을 가진 흑유완들은 전형적인 건요 흑유속구완들이 출토되는 12세기 후기~13세기 전기의 유지보다 이른 12세기 전기의 유지에서 출토된다. 복건지방의 흑유완이 거의 시간적 격차 없이 하카타에 유입되었다는 점에서 볼 때, "공어"·"진잔"명의 I형 흑유속구완의 제작시기가 12세기 전기를 벗어날 가능성은 매우 낮다. 요컨대, "공어"·"진잔"명흑유완은 12세기 전기에 제작되었을 것으로 판단된다.

• 헤리티지:역사와 과학
• /
• 제50권4호
• /
• pp.20-37
• /
• 2017

북제시기 유도 중에는 흰색 혹은 옅은 황색 유약 바탕에 녹색, 갈색, 황색 등으로 채색한 것이 있는데, 이는 "채회유도(彩繪釉陶)"로 통칭된다. 1971년 하남성(河南省) 안양시(安陽市) 홍하둔촌(洪河屯村)에 소재한 범수묘(範粹墓)에서 백유녹채삼계관(白釉綠彩三系罐)과 백유녹채장경병(白釉綠彩長頸甁)이 출토되었으나, 연구자들의 주목을 받지 못한 채 공반 출토된 백유기(白釉器)만이 중국에서 기년 자료가 확실한 가장 이른 백자의 증거로 제시되어 끊임없는 논쟁이 이루어졌다. 필자는 이 채회유도에 주목하여, 지금까지 무덤과 가마터에서 발견된 자료들을 정리하였으며, 이를 바탕으로 장식특징과 제작 기술을 파악하였다. 또한 이들이 부장된 무덤의 연대를 통한 출현 상한시점 및 피장자의 신분을 특정하여 채회유도의 사회적 가치를 알아보았다. 북제시기 채회유도는 이전 시기와 구별되는 제작특징이 확인되었는데, 구체적으로는 자토(瓷土)를 이용한 태토, 2차 소성, 유상회채(釉上繪彩) 기법이 새로 채용되었다. 이러한 특징은 이미 북위(北魏) 시기 유도에서 일부 나타난 변화로, 이것이 북제까지 이어져 백유 채회유도의 출현으로 나타났다고 볼 수 있다. 또한 채회유도의 기형은 동시기 남방지역 자기 기형과 북위시기 이래 생산된 채회의 속성이 결합되어 형성되었음을 확인하였다.