• 한국정보컨버전스학회논문지
• /
• 제7권1호
• /
• pp.47-53
• /
• 2014

본 연구는 안경조정과 관련하여 2회에 걸쳐 실시한 설문 결과를 바탕으로 안경조정에 대한 안경사의 인식 및 실태 변화에 대하여 조사하였으며, 그 결과 다음과 같은 결론을 얻었다. 안경사 업무 중 안경조정에 대한 비중이 점차 증가하는 것으로 나타났다. 안경조정에 있어서 비용의 유료화에 대한 긍정적 인식의 변화가 고객뿐만 아니라 안경사에게서도 나타났다. 플라스틱 안경테의 경우 불편감 해소에 대한 부담 및 조정 빈도에 대한 조사 결과 모두 다리 부분에 대해서 증가한 것으로 나타났다. 안경사들의 조정에 대한 부담을 줄이기 위해서는 올바른 안경사용법에 대한 지속적인 교육이 이루어져야 할 것으로 판단된다.

• 한국임상보건과학회지
• /
• 제9권1호
• /
• pp.1462-1468
• /
• 2021

Purpose; The purpose of this study is to objectively identify and quantify the wearer's feelings of wearing glasses. Methods: The temperature of the skin on the nose ridges and ear, and the area where the glasses were seated, was measured using a thermal imaging camera. Results: Before wearing the glasses, the temperature of the skin surface on the nasal ridge was 34.908 ± 0.875 ℃ and the temperature of the ear region was determined as 31.981 ± 0.549 ℃. The changed temperature measured at 5 minutes later after taking off the glasses showed that the nasal ridge was determined as 35.467 ± 0.342 ℃ and the ear area was determined as 32.994 ± 0.412 ℃ (p<0.05). Conclusions: In this experiment, it was revealed that the glasses cause discomfort and heat in the fitting area. It was the first attempt to study objectively and scientifically. Analysis of frame fitting points by using thermal camera is expected to be helpful when consulting a sensitive person about changes in the fit of glasses.

• 한국안전학회지
• /
• 제35권3호
• /
• pp.105-115
• /
• 2020

This study compares the difference of fit factors (FF) and visual acuity according to masks and eyeglasses preferences for 54 participants. We the precautions and behaviors of discomfort when wearing masks of eyewear wearers. Contact lens discomfort and priority action of complaints was investigated Glasses fitting factors is Optical Center Height(OH), Vertex Distance(VD) and Pantoscopic Angle(PA). We measured those factors and expressed by the ratio of standard point and change point. Quantitative fit factor was measured by Portacount Pro+ 8038. Also, we selected to 6 exercises among 8 exercises OSHA QNFT (Quantitative Fit testing) protocol to measure the fit factors. The pass/ fail criterion of FF was set at 100. Visual acuity(VA) test chart is developed by Chunsuk Han was used, Descriptive statistics was performed. Descriptive statistics(SAS ver 9.2), it is used geometric means, Wilcoxon analysis(P=0.05) When wearing the mask preferentially, fit factor(FF) was high according to the step of glasses fitting parameter. on the other hand, when the glasses first choice, the visual acuity(VA) was high. there was no significant difference. In the case of fit factor (FF), mask first choice/ glasses first choice is OH (p=0.671/ p=0.332), VD (p=0.602/ p=0.571) and PA (p=0.549/ p=0.607). Visual acuity (VA), mask first choice/ glasses first choice is OH (p=0.753/ p=0.386), VD (p=0.815/ p=0.557) and PA (p=0.856/ p=0.562). The workers of workplace and office chose glasses but occupational health workers and students chose mask. In case of discomforts, it was suggested to remove the mask and tolerate discomforts. The main discomforts and usual action of lens were dryness, hyperemia, foreign body sensation, ophthalmodynia, decreased vision and glasses wearing. Therefore, it is necessary to develop a mask wearing method education program considering glasses fitting and develop a hybrid model that minimizes inconvenience when wearing glasses and a mask at the same time.

• 한국안전학회지
• /
• 제33권1호
• /
• pp.47-53
• /
• 2018

This study compares the interrelation of fit factor(FF) and visual acuity test by the order of wearing preference between Particulate filtering face piece respirators(PFFR) and glasses for 54 participants. Glasses fitting factors is Optical Center Height(OH), Vertex Distance(VD) and Pantoscopic Angle(PA) or Visual acuity. We measured those factors and expressed by the ratio of standard point and change point. Quantitative fit factor was measured by Portacount Pro+ 8038 and compared the result of preference of wearing order between respirators and glasses. Also, we selected to 6 exercises among 8 exercises OSHA QNFT (Quantitative Fit testing) protocol to measure the fit factors. The pass/ fail criterion of FF was set at 100. Visual acuity test chart is developed by Chunsuk Han was used, Descriptive statistics was performed. Descriptive statistics(SAS ver 9.2), it is used geometric means, Wilcoxon analysis, peason correlation(P=0.05) Fit factor was increased when the respirator was worn before wearing the glasses(p=0.000) and decreased for visual acuity(p=0.000) The negative correlation was showed between OH and Overall fit factor(r=-0.409, p=0.002). Among 54 participants, 11 participants(20.3%) were worn respirator before wearing glasses and 1 participant(1.9%) was worn glasses before wearing respirator. The overall fit test showed the higher level was investigated for the group of participants wearing respirator before wearing glasses in 6 exercises. Also, overall fit factor were increased when participants wore glasses prior to respirator(16.6) to respirator prior to glasses(36.6). Visual acuity were increased when participants wore respirator prior to glasses(93.8) to glasses prior to respirator(106.0). Finally, comparison result of overall fit factor and visual acuity were glasses first choice from mask first choice. The results showed that higher overall fit factor was investigate when the participants wore the respirator prior to glassess at all. The results implied that it is important to maintain the overall fit factor and visual acuity according to the consideration of OH for glasses fitting when worker wore respirator and glasses at the same time.

• 제어로봇시스템학회논문지
• /
• 제14권5호
• /
• pp.415-419
• /
• 2008

Detecting and correcting defects on LCD glasses early in the manufacturing process becomes important for panel makers to reduce the manufacturing costs and to improve productivity. Many attempts have been made and were successfully applied to detect and identify simple defects such as scratches, dents, and foreign objects on glasses. However, it is still difficult to robustly detect low-contrast defect region, called Mura or blemish area on glasses. Typically, these defect areas are roughly defined as relatively large, several millimeters of diameter, and relatively dark and/or bright region of low Signal-to-Noise Ratio (SNR) against background of low-frequency signal. The aim of this article is to present a robust algorithm to segment these blemish defects. Early 90's, a highly robust estimator, known as the Model-Fitting (MF) estimator was developed by X. Zhuang et. al. and have been successfully used in many computer vision application. Compared to the conventional Least-Square (LS) estimator the MF estimator can successfully estimate model parameters from a dataset of contaminated Gaussian mixture. Such a noise model is defined as a regular white Gaussian noise model with probability $1-\varepsilon$ plus an outlier process with probability $varepsilon$. In the sense of robust estimation, the blemish defect in images can be considered as being a group of outliers in the process of estimating image background model parameters. The algorithm developed in this paper uses a modified MF estimator to robustly estimate the background model and as a by-product to segment the blemish defects, the outliers.

• 한국안광학회지
• /
• 제17권3호
• /
• pp.311-319
• /
• 2012

목적: 안경의 조제가공에 있어서 동공중심과 교정렌즈의 광학중심이 일치하지 않으면 안경이 프리즘을 발생시켜 사위가 유발되고 유발된 사위는 안정피로를 일으키는 요인으로 작용한다. 동공의 중심과 교정렌즈 광학중심의 불일치로 인해 발생하는 유발프리즘에 대해 알아보고자 하였다. 방법: 본 연구는 총 103명을 대상으로 착용 안경렌즈의 광학중심과 동공중심의 일치 여부를 수평방향과 수직방향으로 나누어 조사하였고, 그리고 그 결과들을 안경의 구조에 따라 4개의 그룹으로 분류하였다. 프리즘유발에 안경테의 효과를 보기 위해 프리즘의 총량을 비교하였고, 측정된 프리즘 값들은 독일의 RAL-RG 915 규약과 비교하였다. 결과: 수평방향의 경우 10.7%의 실험 대상자에서는 유발프리즘을 관찰할 수 없었고, 73.8%의 실험 대상자들은 유발프리즘에 의해 영향을 받았으나 그 범위는 허용 수준 내에 있었다. 하지만 15.5%의 실험 대상자들은 허용 범위를 초과하여 프리즘에 의해 영향을 받는 것으로 나타났다. 수직방향의 경우, 23.3%의 실험 대상자들은 안경의 초기 착용시 프리즘에 의한 영향이 없었고, 54.4%의 실험 대상자들은 허용 범위 내의 극히 적은 프리즘에 영향을 받았으며, 22.3%의 실험대상자들은 허용 범위를 초과하는 프리즘 영향을 받는 것으로 나타났다. 이러한 결과는 안경조정(fitting)이 가능한 요소가 적은 그룹 A와 B에서 그룹 C와 D에 비해 보다 많은 수평, 수직 방향의 유발프리즘이 발생한 것을 보여준다. 결론: 안경 착용자의 굴절이상도가 높을수록 안경테 전조정(pre-fitting)을 통하여 동공중심과 렌즈의 광학중심점을 일치시킴으로서 수평, 수직방향 유발프리즘을 최소화시켜 안정피로를 줄일 수 있을 것이다. 따라서 시지각력을 향상시키기 위해 단안PD와 단안Oh의 정확한 설계와 적절한 안경테 조정을 통해 정확한 안경의 조제가공이 필요하다고 사료된다.

• Current Optics and Photonics
• /
• 제8권3호
• /
• pp.230-238
• /
• 2024

The refractive index is a key material-design parameter, especially for high-refractive-index glasses, which are used for precision optics and devices. Increased demand for high-precision optical lenses produced by the glass-mold-press (GMP) process has spurred extensive studies of proper glass materials. B₂O₃, SiO₂, and multiple heavy-metal oxides such as Ta₂O₅, Nb₂O₅, La₂O₃, and Gd₂O₃ mostly compose the high-refractive-index glasses for GMP. However, due to many oxides including up to 10 components, it is hard to predict the refractivity solely from the composition of the glass. In this study, the refractive index of optical glasses based on the B₂O₃-La₂O₃-Ta₂O₅-SiO₂ system is predicted using machine learning (ML) and compared to experimental data. A dataset comprising up to 271 glasses with 10 components is collected and used for training. Various ML algorithms (linear-regression, Bayesian-ridge-regression, nearest-neighbor, and random-forest models) are employed to train the data. Along with composition, the polarizability and density of the glasses are also considered independent parameters to predict the refractive index. After obtaining the best-fitting model by R² value, the trained model is examined alongside the experimentally obtained refractive indices of B₂O₃-La₂O₃-Ta₂O₅-SiO₂ quaternary glasses.

• 한국안전학회지
• /
• 제33권2호
• /
• pp.52-60
• /
• 2018

This study compares the differences of the fit factor by the order of wearing preference between Particulate filtering facepiece respirators(PFFR) and glasses when participants wore simultaneously and a survey of physical and visual complaint. Recognition level about fit of respirators was investigated and the educational (before- and after-) effect of the fit factor. When participants wore PFFR and glasses, physical complaints were nose pressure, slipping, nose and ear pressure, ear pressure and rim loosen, the most highly physical complaints were nose pressure. Visual complaints were demister, blurry vision, dizziness, visual field, and lens dirty, the most highly visual complaints were demister. But, there was significant difference in physical complaint such as nose pressure(10.3%), slipping (23.0%), nose and ear pressure(14.3%), and rim loosen(16.2%), visual complaint such as visual field(13.8%) and lens dirty(32.4%). For the recognition of fit of respirators, respirators fitness, leak site, an initial point and an object, faulty factor, recognition level was higher. Fit factor was increased after education of proper wearing of respirator. Change of the fit factor was smaller compared to the normal breathing and after 6 actions in case of after education. Questionnaire consisted of general characteristics and physical/visual complaint, recognition of fit. Complaints were measured after the QNFT with multiple choices. Quantitative fit factor was measured by device and compared the result of (before- and after-) educational effect. Also, we selected to 6 actions (Normal breathing, Deep breathing, Bending over, Turning head side to side, Moving head up and down, Normal breathing) among 8 actions OSHA QNFT (Quantitative Fit testing) protocol to measure the fit factors. The fit factor was higher after the training (p=0.000). Descriptive statistics, paired t-test, and Wilcoxon analysis were performed to describe the result of questionnaire and fit test. (P=0.05) Therefore, it is necessary to investigate the quantitative research such as training program and glasses fitting factor about the wearing of PFFR and glasses simultaneously.

• Bulletin of the Korean Chemical Society
• /
• 제19권1호
• /
• pp.5-21
• /
• 1998

The purpose of this paper is to show that X-ray absorption spectroscopy (XANES and EXAFS) is a powerful technique for characterizing both crystalline and amorphous solids from structural (local order) and electronic point of view. The principle of this technique is briefly described by showing the main factors which must be considered for recording and fitting the experimental results. Some non-trivial examples have been selected for demonstrating that XAS spectroscopy is the only technique for bringing a definitive answer as for example: the determination of the local distortion of the $NiO_6$ octahedra in the $Li_{1-z}Ni_{1+z}O_2$ layered oxides and the evidence of the presence of copper pairs in the NASICON-type phosphate $CuZr_2 (PO_4)_3$. Are also reported some significant examples for which XAS spectroscopy is decisive with other characterization methods as (i) Raman spectroscopy for glasses (ii) Mossbauer spectroscopy for $LiNi_{1+z-t}Fe_To_2$ oxides (iii) magnetic measurements for Ce-based intermetallic compounds.

• 한국안광학회지
• /
• 제12권1호
• /
• pp.85-90
• /
• 2007

안경렌즈의 무반사 코팅물질로 사용되는 황화아연(Zinc Sulphide : ZnS)의 단일박막을 실리콘과 슬라이드 유리 기판위에 스핀코팅방법으로 증착하였다. 박막 증착 후 변입사각분광타원계(VASE : Variable Angle Spectroscopic Ellipsometer)를 사용하여 1.5~5.0 eV 광 에너지 영역에서 타원 각(ellipsometry angle) ${\Delta}$, ${\Psi}$를 측정하였다. 이 측정결과들을 Jellison Modine 분산관계식을 사용하여 최적맞춤하고, 매개변수들을 구하여 박막의 광학상수인 굴절계수 $n({\lambda})$와 소광계수 $k({\lambda})$를 결정하였다.