• 한국재료학회지
• /
• 제15권6호
• /
• pp.388-392
• /
• 2005

The $Zr_{57}V_{36}M_7$ getter alloy was prepared by Fe substituting Ga or Y for Fe on $Zr_{57}V_{36}M_7$ getter alloy(St707), and the activation temperatures and the hydrogen a sorption speeds of these alloys were investigated. The activation temperatures of these alloys were estimated from the ultimate pressure-temperature curve and lowered about $100\~200\;K$ compared to $Zr_{57}V_{36}M_7$, fetter alloy(St707). However, final pressures at fully activated temperature were increased with substitution of Fe by Ga and Y on $Zr_{57}V_{36}M_7$ getter alloy. The hydrogen sorption speeds of these alloys measured by an orifice method were decreased about $0.460\~0.586liter/sec$ g compared to $Zr_{57}V_{36}M_7$ getter alloy.

• 한국재료학회지
• /
• 제15권5호
• /
• pp.306-312
• /
• 2005

The hydrogen sorption properties of $Ti_{0.3}Zr_{0.2}V_{0.5}$ NEC(non-evaporable getter) alloy and its hydrides were evaluated at room temperature. The alloy and hydride powders were prepared by the Hydride-DeHydride(HDH) method. The hydrogen sorption speed of $Ti_{0.3}Zr_{0.2}V_{0.5}$ alloy was measured to increase with the amounts of hydride phase in the getter. The hydrogen sorption speeds of $Ti_{0.3}Zr_{0.2}V_{0.5},\;(Ti_{0.3}Zr_{0.2}V_{0.5})H_{1.52},\;and\;(Ti_{0.3}Zr_{0.2}V_{0.5})H_{1.94}$ were 2.22, 3.14 and 5.08 liter/sec, respectively. The unexpected enhancement of hydrogen sorption speed with the presence of the hydride phase is considered to be due to the pre-saturation of hydrogen trap sites which can retard the diffusion of hydrogen in the alloy.

• 한국재료학회지
• /
• 제15권2호
• /
• pp.79-84
• /
• 2005

The lowest activation temperature of a commercial vacuum getter reported so far in literature was about $400^{\circ}C$. Recently, $Ti_{0.3}Zr_{0.2}V_{0.5}$ alloy has been reported to exhibit the activation temperature lower than $200^{\circ}C$ when they are prepared as thin film. In this study, the alloy was prepared as bulk form and its activation temperature and hydrogen sorption properties were investigated in compliance with a standard method. The alloy powder was prepared by arc melting and subsequent HDH(Hydride-DeHydride) process. The activation temperature of the alloy was estimated from the ultimate pressure-temperature curve and located between $150^{\circ}C\;and\;200^{\circ}C$. The hydrogen sorption speed measured by an orifice method was 0.895 liter/sec which is comparable to thin film of same composition.

• 한국분말재료학회지
• /
• 제14권1호
• /
• pp.50-55
• /
• 2007

The hydrogen sorption speeds of $Zr_{57}V_{36}Ti_7$ amorphous alloy and its crystallized alloys were evaluated at room temperature. $Zr_{57}V_{36}Ti_7$ amorphous alloy was prepared by ball milling. The hydrogen sorption rate of the partially crystallized alloy was higher than that of amorphous. The enhanced sorption rate of partially crystallized alloy was explained in terms of grain refinement that has been known to promote the diffusion into metallic bulk of the gases. The grain refinement could be obtained by crystallization of amorphous phase resulting in the observed increase in sorption property.

• 한국진공학회지
• /
• 제14권1호
• /
• pp.1-6
• /
• 2005

비증발형 게터용 금속이나 합금의 표면은 대기중에서 얇은 산화층등으로 덮여있다. 이들이 제품 내에서 게터역할을 하기 위해서는 진공이나 불활성 분위 내에서 가열하여 표면 산화층을 제거하는 활성화공정이 필요하며 활성화온도는 장착 제품을 결정하는 중요한 인자가 된다. 게터의 기본적인 특성은 활성화 및 각종가스에 대한 흡수능으로 대별할 수 있다. 이중 게터의 흡수능에 대해서는 ASTM등에서 규정하고 있으나 활성화온도에 대해서는 아직 표준적인 방법이 제시되어 있지 못하다. 본 연구에서는 온도에 따른 도달압력 측정에 의해 게터의 활성화온도를 결정하는 비교적 간단한 방법을 제시하였다. 본 방법으로 측정한 TiZrV 합금의 활성화온도가 100℃～200℃ 범위에 있다.

• 한국재료학회지
• /
• 제15권12호
• /
• pp.802-808
• /
• 2005

The hydrogen sorption speeds of $Zr_{57}V_{36}Fe_7$ amorphous alloy and its crystallized alloys were evaluated at room temperature $Zr_{57}V_{36}Fe_7$ amorphous alloy was prepared by ball milling. The amorphous alloy was crystallized through two stages. Initially, $\alpha-Zr$ solid solution was appeared from the amorphous phase. Two cubic Laves compounds were precipitated afterwards from the remained amorphous and from excessively saturated solid solution at higher temperature. The hydrogen sorption speed of the partially crystallized alloy was higher than that of amorphous. The enhanced sorption speed of partially crystallized alloy was explained in terms of surface oxygen stability which has been known to retard the activation of amorphous alloys. The retardation could be reduce by crystallization process resulting in the observed increase in sorption property.

• 한국재료학회지
• /
• 제16권2호
• /
• pp.116-122
• /
• 2006

The effects of milling time in argon and hydrogen atmospheres on the hydrogen sorption speed of a getter alloy, $Zr_{57}V_{36}Fe_{7}$, was studied. The hydrogen sorption speed of milled alloys was evaluated at room temperature. In argon, as the oxygen content increased with milling time, the hydrogen sorption speed decreased accordingly. In hydrogen, on the other hand, the oxygen content decreased at first with milling time but started increasing after 5 hrs of milling time. Similar to the case of argon, however, the hydrogen sorption speed changed exactly in the opposite direction with the oxygen content, exhibiting the maximum rate at 5 hrs. These results suggest that in both atmospheres the hydrogen sorption speeds are inversely related with the oxygen contents.

• 한국분말재료학회지
• /
• 제16권1호
• /
• pp.28-32
• /
• 2009

The activation temperatures and hydrogen sorption rates of $Ti_{80-X}Zr_{20}V_X$ alloys were evaluated at room temperature. The alloy powders were prepared by arc melting and then hydride-dehydride(HDH) process. The alloy powders were apt to activate by increase of vanadium in Ti-Zr-V alloys. The easy activation was explained in terms of surface oxygen content which decreased with increase of vanadium on Ti-Zr-V alloys.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2005년도 춘계학술발표대회 및 제8회 신소재 심포지엄 논문개요집
• /
• pp.150-150
• /
• 2005

• 한국분말재료학회지
• /
• 제12권6호
• /
• pp.433-440
• /
• 2005

The hydrogen sorption speed of $Zr_{57}V_{36}Fe_7$ nanocrystalline and amorphous alloys was evaluated at room temperature. Nanocrystalline alloys of $Zr_{57}V_{36}Fe_7$ were prepared by planetary ball milling. The hydrogen sorption speed of nanocrystalline alloys was higher than that of the amorphous alloy. The enhanced sorption speed of nanocrystalline alloys was explained in terms of surface oxygen stability which has been known to retard the activation of amorphous alloys. The retardation can be reduced by formation of nanocrystals, which results in the observed increase in sorption properties.