• 제목/요약/키워드: geometric properties

검색결과 861건 처리시간 0.026초

투수계수 산정을 위한 균질화 해석법의 적응 (Application of the Homogenization Analysis to Calculation of a Permeability Coefficient)

  • 채병곤
    • 한국지하수토양환경학회지:지하수토양환경
    • /
    • 제9권1호
    • /
    • pp.79-86
    • /
    • 2004
  • 암석 내 균열을 따른 수리전도도는 균열의 기하학적 요소, 즉 방향, 간극, 거칠기 그리고 상호 연결도에 주로 좌우된다. 따라서, 균열 내 투수계수를 정확하게 계산하기 위해서는 이와 같은 기하 요소들을 최대한 계산모델에 반영할 필요가 있다. 이 연구에서는 균열 기하양상을 최대한 정확히 반영한 균열모델에서 기존 수치해석과는 다른 새로운 방법인 균질화 해석법(homogenization analysis method)을 이용하여 균열을 따른 투수계수를 구하기 위해 수치해석을 수행하였다. 먼저, 공초점 레이저 스캔 현미경(Confocal Laser Scanning Microscope)을 이용하여 암석시료의 균열 조도와 균열에 가한 수직압축력의 변화에 따른 간극 변화량을 직접 측정하고, 이와 같이 획득한 자료는 균열모델 재현을 위한 입력자료로 사용되었다. 재현된 균열모델을 토대로 한 균질화 해석법은 미시규모(microscale) 매질특성과 거시규모(macroscale) 매질특성을 동시에 고려하여 투수계수를 계산할 수 있는 것이다. 즉, 균질화 해석법은 주기적 미세구조(microstructure)를 갖는 미소 불균질 물질의 거동특성을 구명하기 위해 개발된 새로운 형태의 섭동(perturbation) 이론이다. 이는 균질한 미시규모에서 미시 투수특성을 계산한 후, 거시규모에서의 균질화 투수계수를 계산하게 된다. 그러므로, 이 방법은 균열 기하양상의 국부적 영향을 고려한 투수특성을 정확히 해석할 수 있다. 균질화법을 이용한 투수계수 산정결과를 기존 연구에서 제안한 경험식과 비교하여 그 타당성을 검증하기 위해 전술한 2차원 균열모델을 이용한 투수계수 계산을 수행하였다. 균열모델은 거칠기(roughness)를 반영하고 동일한 간극을 할당한 평행판 모델을 가정하였다. 계산결과에 의하면, 균질화 해석법에 의해 계산한 C-투수계수는 실내투수시험에 의해 구한 투수계수와 같은 범위의 값을 가지거나 $10^1$ 정도의 차이를 보여, 그 계산결과는 타당하다고 볼 수 있다. 그러나, 균질화 해석법은 국부적으로 불균질한 균열 기하양상과 물질특성이 미시규모와 거시규모에서 모두 고려되므로, 이들 특성을 정확히 알고 있을 경우 기존에 제안된 경험식들에 의한 계산결과 보다 균질화 해석법의 결과가 훨씬 정확함을 주목하여야 한다.

화학물질 관리 연구-2. 환경부와 고용노동부의 관리 화학물질의 구분, 노출기준 및 독성 지표 등의 특성 비교 (Study on the Chemical Management - 2. Comparison of Classification and Health Index of Chemicals Regulated by the Ministry of Environment and the Ministry of the Employment and Labor)

  • 김선주;윤충식;함승헌;박지훈;김송하;김유나;이지은;이상아;박동욱;이권섭;하권철
    • 한국산업보건학회지
    • /
    • 제25권1호
    • /
    • pp.58-71
    • /
    • 2015
  • Objectives: The aims of this study were to investigate the classification system of chemical substances in the Occupational Safety and Health Act(OSHA) and Chemical Substances Control Act(CSCA) and to compare several health indices (i.e., Time Weighted Average (TWA), Lethal Dose ($LD_{50}$), and Lethal Concentration ($LC_{50}$) of chemical substances by categories in each law. Methods: The chemicals regulated by each law were classified by the specific categories provided in the respective law; seven categories for OSHA (chemicals with OELs, chemicals prohibited from manufacturing, etc., chemicals requiring approval, chemicals kept below permissible limits, chemicals requiring workplace monitoring, chemicals requiring special management, and chemicals requiring special heath diagnosis) and five categories from the CSCA(poisonous substances, permitted substances, restricted substances, prohibited substances, and substances requiring preparation for accidents). Information on physicochemical properties, health indices including CMR characteristics, $LD_{50}$ and $LD_{50}$ were searched from the homepages of the Korean Occupational and Safety Agency and the National Institute of Environmental Research, etc. Statistical analysis was conducted for comparison between TWA and health index for each category. Results: The number of chemicals based on CAS numbers was different from the numbers of series of chemicals listed in each law because of repeat listings due to different names (e.g., glycol monoethylether vs. 2-ethoxy ethanol) and grouping of different chemicals under the same serial number(i.e., five different benzidine-related chemicals were categorized under one serial number(06-4-13) as prohibited substances under the CSCA). A total of 722 chemicals and 995 chemicals were listed at the OSHA and its sub-regulations and CSCA and its sub-regulations, respectively. Among these, 36.8% based on OSHA chemicals and 26.7% based on CSCA chemicals were regulated simultaneously through both laws. The correlation coefficients between TWA and $LC_{50}$ and between TWA and $LD_{50}$, were 0.641 and 0.506, respectively. The geometric mean values of TWA calculated by each category in both laws have no tendency according to category. The patterns of cumulative graph for TWA, $LD_{50}$, $LC_{50}$ were similar to the chemicals regulated by OHSA and CCSA, but their median values were lower for CCSA regulated chemicals than OSHA regulated chemicals. The GM of carcinogenic chemicals under the OSHA was significantly lower than non-CMR chemicals($2.21mg/m^3$ vs $5.69mg/m^3$, p=0.006), while there was no significant difference in CSCA chemicals($0.85mg/m^3$ vs $1.04mg/m^3$, p=0.448). $LC_{50}$ showed no significant difference between carcinogens, mutagens, reproductive toxic chemicals and non-CMR chemicals in both laws' regulated chemicals, while there was a difference between carcinogens and non-CMR chemicals in $LD_{50}$ of the CSCA. Conclusions: This study found that there was no specific tendency or significant difference in health indicessuch TWA, $LD_{50}$ and $LC_{50}$ in subcategories of chemicals as classified by the Ministry of Labor and Employment and the Ministry of Environment. Considering the background and the purpose of each law, collaboration for harmonization in chemical categorizing and regulation is necessary.

삼차원 불연속면 연결망을 이용한 암반의 등가수리전도도 결정에 대한 연구 (Determination of Equivalent Hydraulic Conductivity of Rock Mass Using Three-Dimensional Discontinuity Network)

  • 방상혁;전석원;최종근
    • 터널과지하공간
    • /
    • 제13권1호
    • /
    • pp.52-63
    • /
    • 2003
  • 단층, 균열, 절리 등의 암반 내에 존재하는 수많은 불연속면은 암반의 역학적\ulcorner수리적 특성을 좌우하는 중요한 요소이다. 암반 내 지하수 유동에 큰 영향을 미치는 요소는 불연속면의 발생빈도와 기하학적 특성 그리고 불연속면 상호간의 연결성이라고 할 수 있다. 이 연구에서는 불연속면의 특성인 발생빈도, 크기, 방향, 간극의 크기 등의 분포함수를 가정하여 3차원 불연속면 연결망 내에서 지하수 유동 해석을 실시하는 프로그램을 작성하였다. 이 프로그램은 3차원 상에 불연속면을 발생시키고 불연속면간 연결성을 분석하여 수리해석을 실시한다. 이 프로그램을 통해 수리해석을 실시한 결과, 컴퓨터 메모리의 한계로 인해 대상지역의 대표요소체적을 정확하게 결정할 수는 없었지만, 대략 25$\times$25$\times$25 ㎥ 이상에서 결정될 것으로 추정할 수 있었다. 지하수 유동해석에 영향을 미치는 간극의 범위를 계산한 결과, 불연속면 평균 간극의 30% 이하의 간극을 갖는 불연속면은 지하수 유동에 미치는 영향이 미미한 것으로 나타났다. 또, 경계효과를 고려한 경우와 그렇지 않은 경우의 등가수리전도도의 차이는 거의 없었으며 이는 대상지역에서 간극이 큰 일부의 불연속면을 통한 유동이 전체적인 지하수 유동에 크게 영향을 주기 때문인 것으로 판단되었다. 입력자료 중에서 암반의 등가수리전도도에 영향을 미치는 요소의 중요도는 불연속면의 길이, 간극, 방향의 순서로 나타났다. 대상 암반에 단층면이 존재할 경우, 등가수리전도도는 단층면에 평행한 방향의 요소는 증가하며 이에 수직인 방향의 요소는 약간 증가하다 수렴하는 경향을 보였다.openyl methyl disulfide와 (E)-propenyl methyl disulfide 또한 동결건조 양파에서 증가되어 짐을 확인하였다. 올그루밀이 가장 많았다. Niacin함량은 탑동밀이 2.81 mg%로 가장 높은 함량을 보였고, 다음으로 알찬밀, 올그루밀 순이었다. 지방산 조성은 보리와 밀에서 Cl8:2>Cl6:0>Cl8:1 순으로 보리는 전체의 90%, 밀은 92%를 차지하였다. 단일 불포화지방산은 보리가 11∼13%, 밀이 21∼27%이며, 다중불포화지방산은 보리가 57∼59%, 밀은 36∼50%로 보리가 더 많은 것으로 나타났다. PUFA/SFA 비율은 보리의 경우 2.1로 품종별로 지방산 조성에 차이를 나타내지 않은 반면 밀은 1.0∼1.9 범위로 품종별로 지방산 조성에 차이를 나타내었다. 보리와 밀의 아미노산 함량은 glutamic acid를 가장 많이 함유하는 것으로 분석되었다. 보리 품종별 필수아미노산 함량을 살펴보면 Lysine, valine, tryptophan 함량은 두산8호에서, phenylalanine 함량은 서둔찰보리에 많이 함유되어 있는 것으로 분석되었다. 밀 품종별 Iysine, isoleucine 함량은 탑동밀에서 다소 낮았다.) 보였다. 체질량지수와 비만지수는 각각 HDL-콜레스테롤과는 부의 (각 P<0.05), 적혈구수와는 정의(각 p<0.05) 상관관계를 보였다. 허리엉덩이둘레비는 혈청 GPT, glucose, MCV와 각각 유의한 정의 상관관계를 보였다(각 p<0.05). 이상의 연구결과를 종합할 때 남녀 비만 중학생 모두 총 열량 섭취량 중 지질로 인한 열량 섭취비율이 높았고 비만도가 증가할수록 콜레스테롤의

유체 주입에 의한 단층의 수리역학적 거동 해석: 국제공동연구 DECOVALEX-2019 Task B 연구 현황(Step 1) (Hydro-Mechanical Modelling of Fault Slip Induced by Water Injection: DECOVALEX-2019 TASK B (Step 1))

  • 박정욱;박의섭;김태현;이창수;이재원
    • 터널과지하공간
    • /
    • 제28권5호
    • /
    • pp.400-425
    • /
    • 2018
  • 본 논문에서는 국제공동연구인 DECOVALEX-2019 프로젝트 Task B의 연구결과와 현황을 소개하였다. Task B의 주제는 'Fault slip modelling'으로 유체의 주입으로 인해 발생하는 단층의 재활성(미끄러짐, 전단파괴)과 수리역학적 거동을 예측할 수 있는 해석기법을 개발하는 데에 그 목적이 있다. 1단계 연구는 참가팀들이 연구주제에 대해 숙지하고, 벤치마크 모델을 대상으로 단층의 투수특성과 역학적 거동의 상호작용을 모사할 수 있는 해석코드를 개발할 수 있도록 하는 준비 단계의 연구이다. 본 연구에서는 TOUGH-FLAC 연동해석 기법을 사용하여 물 주입으로 인한 단층의 수리역학적 연계거동을 모사하였다. TOUGH2 해석에서는 단층을 Darcy의 법칙과 삼승법칙을 따르는 연속체 요소로 모델링하였으며, FLAC3D 해석에서는 미끄러짐과 개폐가 허용되는 불연속 인터페이스 요소를 통해 모사하였다. 두 가지 수리간극모델에 대하여 수리역학적 커플링 관계식을 수치화하였으며, 연속체 요소(수리모델)와 인터페이스 요소(역학모델)의 거동을 연계할 수 있는 해석기법을 제시하였다. 또한, 단층의 역학적 변형(간극의 변화)으로 인한 수리물성 변화와 기하학적 변화(해석 메쉬의 변형)를 수리해석에 반영할 수 있는 해석기법을 개발하였다. 다양한 압력의 물을 단계적으로 주입하고 이로 인해 유도되는 단층의 탄성거동 및 전단파괴(미끄러짐)에 대해 살펴보았으며, 수리간극의 변화 양상과 원인, 압력 분포와 주입율의 관계 등을 면밀히 검토하였다. 해석 결과, 본 연구에서 개발한 해석기법이 물 주입으로 인한 단층의 미끄러짐 거동을 합리적인 수준에서 재현할 수 있는 것으로 판단할 수 있었다. 본 연구의 해석모델은 Task B에 참여하는 국외 연구팀들과의 의견 교류와 워크숍을 통해 지속적으로 개선하는 한편, 향후 연구의 현장시험에 적용하여 타당성을 검증할 예정이다.

진주시 일원에 산재하는 환경수의 수질 (Water Quality of the Environmental Water at Chinju Area)

  • 김용관;고광배;하봉석
    • 한국수산과학회지
    • /
    • 제20권2호
    • /
    • pp.126-135
    • /
    • 1987
  • 진주시내에 산재하는 약수터 6개소, 우물 및 펌프수 2개소, 상수도 1개소, 강수 3개소 등 총 12개소를 선정하여 이의 수질관리에 필요한 기초자료를 얻고자 1986년 5월부터 동년 10월사이에 6회에 걸쳐 72개 시료로서 이들의 물리적 성질, 영양염류및 염화이온 농도, 위생지표세균에 대한 실험 결과를 요약하면 다음과 같다. 1. pH의 변화범위는 $5.4\~7.8$였으며, 약수는 평균 6.4로서 미 산성수였다. 수온은 $12.0\~30.0^{\circ}C$로서 큰 폭으로 변하였으며, 약수는 $20^{\circ}C$를 상회였다. 전기전도도는 $0.51\times10^2\~8.095\times10^2\;\mu\mho/cm$로서 타 지역보다 높게 나타 났었다. 2. 약수나 우물물에서는 아질산성 질소와 암모니아성 질소가 동시에 검출되지 않았으며 강수의 경우는 하수의 유입으로 향할수록 농도가 높아졌다. 질산성 질소의 농도는 $0.2336\~14.1648mg/l$였으며, 특히, 지점 2가 지점 4에서 보다 40배 이상으로 월등히 높았다. 인산성 인은 $0.0013\~0.8315mg/l$로 지점별 차이가 있었으며, 지점 8은 평균 0.6177mg/l로 높은 농도였다. 규산성 규소는 $1.7\~15.28mg/l$ 였으며, 지점 8과 9에서 평균 $10\~13mg/l$로서 높았으나, 기준치 50ppm에는 미달되었다. 염화이온 농도는 3.6\~126.8mg/l였고 강수는 낮은 온도였다. 특히, 지점 9에서는 지하 140m 지하수로서 염화이온 농도가 109mg/l로 높게 나타났었다. 3. 오염지표세균의 분포범위는 약수의 경우, 대양균군은 $9.1\~4,600/100ml$, 분편계대장균은 $0.460/100ml$로서 상수 수질기준에 부적합한 것으로 나났다. 지점 11과 12의 강수는 대장균군이 $4,300\~460,000/100ml$, 분편계대장균이 $2,300\~110,000/100ml$로서 극심한 오염도를 나타내었다. 4. Escherichia coli는 분리 동정된 68균주중 $38.2\%$(26 균주)로 높게 나타났다.

  • PDF

디지털미디어 환경(環境)에서 디자인 특성(特性)에 관한 연구(硏究) - 실내제품(室內製品) 디자인을 중심으로 - (A Destructive Method in the Connection of the Algorithm and Design in the Digital media - Centered on the Rapid Prototyping Systems of Product Design -)

  • 김석화
    • 조형예술학연구
    • /
    • 제5권
    • /
    • pp.87-129
    • /
    • 2003
  • The purpose of this thesis is to propose a new concept of design of the 21st century, on the basis of the study on the general signification of the structures and the signs of industrial product design, by examining the difference between modern and post-modern design, which is expected to lead the users to different design practice and interpretation of it. The starting point of this study is the different styles and patterns of 'Gestalt' in the post-modern design of the late 20th century from modern design - the factor of determination in industrial product design. That is to say, unlike functional and rational styles of modern product design, the late 20th century is based upon the pluralism characterized by complexity, synthetic and decorativeness. So far, most of the previous studies on design seem to have excluded visual aspects and usability, focused only on effective communication of design phenomena. These partial studies on design, blinded by phenomenal aspects, have resulted in failure to discover a principle of fundamental system. However, design varies according to the times; and the transformation of design is reflected in Design Pragnanz to constitute a new text of design. Therefore, it can be argued that Design Pragnanz serves as an essential factor under influence of the significance of text. In this thesis, therefore, I delve into analysis of the 20th century product design, in the light of Gestalt theory and Design Pragnanz, which have been functioning as the principle of the past design. For this study, I attempted to discover the fundamental elements in modern and post-modern designs, and to examine the formal structure of product design, the users' aesthetic preference and its semantics, from the integrative viewpoint. Also, with reference to history and theory of design my emphasis is more on fundamental visual phenomena than on structural analysis or process of visualization in product design, in order to examine the formal properties of modern and post-modern designs. Firstly, In Chapter 1, 'Issues and Background of the Study', I investigated the Gestalt theory and Design Pragnanz, on the premise of formal distinction between modern and post-modern designs. These theories are founded upon the discussion on visual perception of Gestalt in Germany in 1910's, in pursuit of the principle of perception centered around visual perception of human beings. In Chapter 2, I dealt with functionalism of modern design, as an advance preparation for the further study on the product design of the late 20th century. First of all, in Chapter 2-1, I examined the tendency of modern design focused on functionalism, which can be exemplified by the famous statement 'Form follows function'. Excluding all unessential elements in design - for example, decoration, this tendency has attained the position of the international style based on the spirit of Bauhause - universality and regularity - in search of geometric order, standardization and rationalization. In Chapter 2-2, I investigated the anthropological viewpoint that modern design started representing culture in a symbolic way including overall aspects of the society - politics, economics and ethics, and its criticism on functionalist design that aesthetic value is missing in exchange of excessive simplicity in style. Moreover, I examined the pluralist phenomena in post-modern design such as kitsch, eclecticism, reactionism, hi-tech and digital design, breaking away from functionalist purism of modern design. In Chapter 3, I analyzed Gestalt Pragnanz in design in a practical way, against the background of design trends. To begin with, I selected mass product design among those for the 20th century products as a target of analysis, highlighting representative styles in each category of the products. For this analysis, I adopted the theory of J. M Lehnhardt, who gradated in percentage the aesthetic and semantic levels of Pragnantz in design expression, and that of J. K. Grutter, who expressed it in a formula of M = O : C. I also employed eight units of dichotomies, according to the G. D. Birkhoff's aesthetic criteria, for the purpose of scientific classification of the degree of order and complexity in design; and I analyzed phenomenal aspects of design form represented in each unit. For Chapter 4, I executed a questionnaire about semiological phenomena of Design Pragnanz with 28 units of antonymous adjectives, based upon the research in the previous chapter. Then, I analyzed the process of signification of Design Pragnanz, founded on this research. Furthermore, the interpretation of the analysis served as an explanation to preference, through systematic analysis of Gestalt and Design Pragnanz in product design of the late 20th century. In Chapter 5, I determined the position of Design Pragnanz by integrating the analyses of Gestalt and Pragnanz in modern and post-modern designs In this process, 1 revealed the difference of each Design Pragnanz in formal respect, in order to suggest a vision of the future as a result, which will provide systemic and structural stimulation to current design.

  • PDF

산소-니트로실 착물의 연구(제3보): 티오메틸아미드옥심의 몰리브덴과 텅스텐 산소-니트로실 착물의 합성과 특성 (Synthesis and Properties of Molybdenum and Tungsten Oxo-Nitrosyl Complexes of Methylthioamidoxime)

  • 노수균;오상오
    • 대한화학회지
    • /
    • 제40권1호
    • /
    • pp.28-36
    • /
    • 1996
  • 본 연구의 오핵 착물은 몰리브덴(VI)과 텅스텐(VI)의 다핵 착물, 몰리브덴(O)과 텅스텐(O)의 디니트로실 단핵 착물 및 티오메틸아미드옥심의 반응에서 얻었다. 합성한 착물$(n-Bu_4N)_2[Mo_4O_{12}Mo(NO)_{2}{CH_3SCH_2C(NH_2)NHO}_2{CH_3SCH_2C(NH)NO}_2]$ (1), $(n-Bu_4N)_2[W_4O_{12}Mo(NO)_2{CH_3SCH_2C(NH_2)NHO}_2{CH_3SCH_2C(NH)NO}_2]$ (2) $(n-Bu_4N)_2[Mo_4O_{12}Mo(NO)_2{CH_3SCH_2C(NH_2)NHO}_2{CH_3SCH_2C(NH)NO}_2]$ (3)은 원소 분석, 적외선, 전자 흡수 및 $^1/H\;NMR$ 스펙트라에 의해 특성을 조사하였다. 착물의 분광학적인 연구는 시스-${M(NO)_2}^{2+}$(M=Mo, W) 단위체 및 착물의 적은 비편재화 존재를 알 수 있다. 합성한 착물$(n-Bu_4N)_2\;[W_4O_{12}Mo(NO)_2{CH_3SCH_2C(NH_2)NHO}_2{CH_3SCH_2C(NH)NO}_2]$ (2)은 X-선 단결정 회절에서 결정구조를 밝혔고, 얻은 데이타는 Monoclinic, $P2_1/a,\;a\;=\;22.14(2){\angs},\;b\;=\;14093(1){\angs},\;{\beta}\;=\;111.08(6){\deg},\;V\;=\;7155(9){\angs}^3,$ Z = 4이었다. 구조 결정에 이용한 회절강도 6191개($I>3{\sigma}(I)$)에 대한 최종 신뢰도 인자는 0.072 이었다. 물질의 골격구조는 텅스텐의 산화상태 6가로 구성된 두 개의 이핵체 $[W_2O_5{CH_3SCH_2C(NH_2)NHO}\;{CH_3SCH_2C(NH)NO}]$와 몰리브덴의 산화상태 0가인 ${Mo(NO)_2}6{2+}$로 형성되어 있다. ${M(NO)_2}^{2+}$(M = Mo, W) 단위체는 형식상 시스 형태이며 기하학적으로 $C_{2v}$ 대칭을 가진다.

  • PDF

광도전체 필름 상부 전극크기에 따른 전기적 신호 특성 비교 (Comparison of Electrical Signal Properties about Top Electrode Size on Photoconductor Film)

  • 강상식;정봉재;노시철;조창훈;윤주선;전승표;박지군
    • 한국방사선학회논문지
    • /
    • 제5권2호
    • /
    • pp.93-96
    • /
    • 2011
  • 현재 광도전체 물질을 이용한 직접변환방식의 방사선 검출기 연구가 활발히 진행되고 있다. 이러한 광도전체 물질 중 상용화된 비정질 셀레늄(a-Se)에 비해 요오드화수은($HgI_2$) 광도전체 화합물은 고에너지에 대한 높은 흡수율과 민감도를 가지는 것으로 보고되고 있다. 또한 이러한 광도전체 필름은 발생된 신호의 검출효율은 상하부 전극크기에 의한 전기장의 세기 및 기하학적 분포에 많은 영향을 미치는 것으로 보고되고 있다. 이에 본 연구는 $HgI_2$ 광도전체 필름에서 상하부 전극의 크기에 따른 X선 검출특성을 조사하였다. 시편제작은 기존의 진공 증착법이 두꺼운 대면적 필름제조가 어렵다는 문제점을 해결하고자 페이스트 인쇄법을 이용하여 인듐전극이 코팅된 유리기관위에 제작하였으며, 시편의 두께를 $150{\mu}m$, 면적크기를 $3cm{\times}3cm$ 크기로 제조하였다. 상부전극은 마그네틱 스퍼터링법을 이용하여 $3cm{\times}3cm$, $2cm{\times}2cm$, $1cm{\times}1cm$의 크기로 ITO(indium-tin-oxide)를 진공 증착하였다. 특성평가를 위해 X선 선량에 대한 민감도와 누설전류, 신호대잡음비를 측정하여 필름의 전기적 검출 특성을 정량적으로 평가하였다. 그 결과 상부전극의 크기가 증가함에 따라 검출된 신호의 크기가 다소 증가하는 경향을 보였다. 하지만, 전극크기의 증가에 따른 누설전류 또한 증가함으로써 신호대잡음비는 오히려 감소하는 것을 확인할 수 있었다. 이러한 결과로부터 향후 광도전체를 적용한 X선 영상검출기 개발에 있어 상부전극의 최적크기와 구조설계가 고려되어야 할 것으로 사료된다.

모유 섭취 신생아 유래 Lactobacillus acidophilus에 의한 Conjugated Linoleic Acid 생성 (Production of Conjugated Linoleic Acid by Lactobacillus acidophilus Isolated from Breast-Fed Infants)

  • 박정규;송원호;홍성문;김철현
    • 한국축산식품학회지
    • /
    • 제28권5호
    • /
    • pp.580-586
    • /
    • 2008
  • 본 연구는 모유를 섭취하고 있는 생후 7일 이내의 신생아로부터 분리 및 선발된 L. acidophilus를 이용하여 다양한 생리활성을 가진 CLA를 천연적으로 생산하는 젖산균을 Screening하고 선정된 L. acidophilus에 의한 CLA의 최적 생성조건을 설정하기 위하여 실시하였다. 9종의 L. acidophilus를 LA가 $200{\mu}g/mL$의 수준으로 각각 첨가된 MRS 액체배지에 접종하여 48시간 배양한 후 L. acidophilus의 균체 세포막 내에서 형성된 cis-9, trans-11 CLA 함량과 배지 내 유리화된 cis-9, trans-11 CLA 함량을 측정한 결과, 생균수는 대부분 $10^8\;CFU/mL$ 수준이었으며 균체 내로 전환된 cis-9, trans-11 CLA는 검출되지 않거나 매우 미량 존재하였다. MRS 배지 내 유리화된 cis-9, trans-11 CLA는 전 시험 균주를 통해 생성되었으며 상대적으로 균체 내 생성량 보다 높게 나타났고, L. acidophilus NB 203과 NB 209의 생성량이 $26-27{\mu}g/mL$으로 가장 높게 나타났다. 동일한 조건으로 8% 탈지유 배지에 실험한 결과 배양 24시간째의 생균수는 $10^8\;CFU/mL$ 수준이었고, MRS 액체 배지에서의 결과와 유사하게 균체 세포막 내로 incorporation된 cis-9, trans-11 CLA는 대부분의 처리구에서 검출되지 않거나 매우 미량 존재하였으며, 반면 탈지유 배지 내 유리 cis-9, trans-11 CLA는 전 시험 균주를 통해 생성되었고 상대적으로 MRS 액체 배지에서의 생성량 보다 높았으며, 그 중 L. acidophilus NB 203 및 NB 209의 배양액 내 cis-9, trans-11 CLA 생성량이 가장 높게 나타났다. 시험 균주 중 cis-9, trans-11 CLA 생성능이 다른 균주에 비해 높은 것으로 나타난 L. acidophilus NB 203 및 NB 209를 8% 탈지유 배지에 LA 첨가량 및 배양시간을 달리하여 최적 조건을 설정하였으며, 두 시험 균주 모두 LA 첨가에 의한 증식억제 현상은 배양 48시간까지 $1.000{\mu}g/mL$ 첨가 수준에서는 전혀 나타나지 않았으며, $3,000{\mu}g/mL$ 첨가 시 미약하게 나타났다. 배양시간대 별 cis-9, trans-11 CLA 생성량은 두 시험 균주 모두 배양 24시간 이전의 대수증식 기에서 주로 증가하였으며, 배양 24시간 이후부터 생성량이 유지되거나 미량 감소하는 것으로 나타났다. LA의 첨가농도 별 cis-9, trans-11 CLA 생성에 있어 두 시험 균주 모두에서 LA 첨가량이 $1,000{\mu}g/mL$ 수준일 때 cis-9, trans-11 CLA 생성량이 가장 높았으나 $500{\mu}g/mL$ 첨가구와 큰 차이를 나타내지 않았으며, 특히 첨가량을 $3,000{\mu}g/mL$ 수준으로 높여도 $1,000{\mu}g/mL$ 수준일 때와 유사하거나 오히려 감소하는 경향을 보였다. 따라서 이 실험 균주의 최적 LA 생성조건은 탈지유 배지에 LA를 $500{\mu}g/mL$ 수준으로 첨가하여 $37^{\circ}C$에서 24시간 배양시로 나타났다.

반복하중에 따른 수종 임플란트의 피로파절에 관한 연구 (Fatigue fracture of different dental implant system under cyclic loading)

  • 박원주;조인호
    • 대한치과보철학회지
    • /
    • 제47권4호
    • /
    • pp.424-434
    • /
    • 2009
  • 연구목적: 임플란트는 수직교합 하중에는 비교적 잘 견디나 측방하중에 대해서는 약한 역학적 성질을 갖고 있으므로 임플란트의 재료 특성과 기하학적 형태에 따른 응력 분석 연구의 필요성이 제기되고 있다. 연구재료 및 방법: 외부육각구조를 갖는 28개의 임플란트를 7개씩 4군으로 나누어 그 제품에 적합한 UCLA gold abutment를 이용해, 제3형 금합금으로 보철 물을 제작하였고, A군 (3i, FULL $OSSEOTITE^{(R)}$-Implant), B군 (Nobelbiocare, Branemark $System^{(R)}$Mk III Groovy RP), C군 (Neobiotec, $SinusQuick^{(TM)}$ EB), D군 (Osstem, US-II)으로 분류하였다. 고정체와 지대주나사, 지대주를 연결한 후 수직적으로 절단하여 연마한 후 미세경도계를 이용하여 10군데에서 경도측정을 실시하였고, 동적하중 피로시험기를 이용하여 60-600 N범위로 파절시까지 동적 하중을 가하였다. 주사전자현미경을 이용하여 지대주나사 및 고정체의 파절 양상과 파절 위치 등을 관찰하였고, 유한요소분석을 통해 고정체와 지대주 나사에 나타나는 응력 분포와 파절면을 비교 분석하였다. 결과: 1.고정체 경도는 A, B, C, D군에서 각각 245.3, 289.7, 281.3, 300.4 Hv로 D군이 가장 높았고, A군이 가장 낮았다. 지대주 나사의 경도는 A, B, C, D군에서 각각 340.00, 317.62, 306.5, 306.2 Hv로 A군이 가장 높고, D군이 가장 낮았다. 2. 모든 실험군에서 임플란트 고정체의 파절은 응력이 집중되는 고정체 3-4번째 나사산 홈 (valley) 부위 또는 내면의 사공간부와 일치하는 부위에서 발생되었고, 피로수명은 A, B, C, D군에서 각각 31585, 47311, 30141, 105371로 D군이 가장 높았으며, A, B, C군과는 유의한 차이가 있었다(P<.05). 3. 파절양상은 B군과D군에서는 고정체와 나사 모두에서 수직 (longitudinal)파절과 수평 (transverse)파절이 동시에 일어나는 복합 (complex mode) 파절이 관찰 되었고, A와 C군에서는 고정체에서 수평 (transverse mode) 파절만이 관찰되었다. 4. 유한요소분석 결과 인장응력이 가장 높은 고정체 표면부에서 피로 균열이 시발되어 압축응력이 가장 높은 반대편 부위로 피로균열이 전파되었으며, 최대 유효 응력값은 C군이 가장 높았고, B군에서 가장 낮았다. 결론: 피질골 높이와 일치하는 임플란트 고정체 부위에서 최대 인장 주응력이 발생되며, 고정체 사공간부 (dead space)가 최대 인장 주응력이 작용하는 지그 표면과 일치할 때 피로파절이 발생되었다. 따라서 악골에 식립된 임플란트의 신뢰성을 향상시키고 수명을 증대시키기 위해서는 가능한 임플란트 주위의 골소실이 일어나지 않도록 해야 할 것이나 골흡수가 일어나 사공간부 수준까지 진행된다면 임플란트의 파절 빈도가 증가될 수 있으므로 이에 대한 대처가 필요할 것으로 사료된다.