• 대한기계학회논문집B
• /
• 제28권10호
• /
• pp.1231-1237
• /
• 2004

Determination of geometric design parameters of a second-throat type annual supersonic ejector is described. Tested geometric parameters were primary nozzle area ratio, cross-sectional area of second-throat, L/D ratio of second-throat and primary flow injection angle. Varying these four geometric parameters, we build a test matrix made of 81 test conditions, and experimental apparatus was fabricated to accommodate them. For each test condition, the stagnation pressure of primary flow and the static pressure of the secondary flow were measured simultaneously along with their transition to steady operation and finally to unstarting condition. Comparing the performance curve of every case focused on starting pressure, the unstarting pressure and the minimum secondary pressure, we could derive correlations that the parameters have on the performance of the ejector and presented the optimal design method of the ejector. Additional experiments were carried out to find effects of temperature and mass flow rate of the secondary flow.

• 항공우주기술
• /
• 제10권1호
• /
• pp.30-38
• /
• 2011

본 연구에서는 터보펌프 터빈 블레이드 형상을 구성하고 있는 요소들 중 슈라우드와 필릿, 그리고 블레이드 모서리 둥글기가 블레이드의 응력에 미치는 구조적인 영향을 조사하였다. 슈라우드는 터빈의 공력적 효율을 높이기 위하여 흔히 삽입되는 링 형상의 테두리이며, 모든 블레이드와 연결되어 있어 블레이드의 변형을 구속하는 역할을 한다. 한편 블레이드와 허브면, 그리고 블레이드와 슈라우드면 사이의 모서리에는 보통 응력 완화를 위하여 적정 반지름을 가진 필릿이 삽입되고 블레이드 모서리에는 적절한 둥글기가 삽입되는데, 본 연구에서는 슈라우드의 두께와 필릿, 그리고 모서리 둥글기의 반지름 변화에 따른 블레이드 최대 응력을 조사하여 이들 형상 요소가 터보펌프 블레이드의 안전성에 미치는 영향을 규명하였다.

• International Journal of Air-Conditioning and Refrigeration
• /
• 제17권2호
• /
• pp.68-73
• /
• 2009

In this paper, a numerical study has been carried out to investigate the influence of volute geometries on the performance of a sirocco fan. In order to achieve an optimum volute design and explain the interactions between the different geometric configurations in the volute system, three-dimensional computational fluid dynamics and the 'design of experiment' method have been applied. Several geometric parameters, such as the volute expansion angle, the cut-off position and the bell mouth shape, are employed to improve efficiency and performance. $2^k$ factorial designs were performed to screen the most influential parameters and interactions, and showed that the cut-off position and the bell mouth shape are the most significant parameters. The optimum design was selected as a result of the response surface methodology, and effects of these parameters and their interactions were presented. From the results of computational analyses and experimental data, the performance and efficiency of the sirocco fan were successfully improved. Also, detailed effects of geometric variables of the volute system on the fan performance were discussed.

• Kyungpook Mathematical Journal
• /
• 제63권1호
• /
• pp.61-78
• /
• 2023

In this paper, we introduce two new geometric constants related to the heights of triangles: ∆_H(X) and ∆_h(X, I). We also propose two new geometric constants, ∆_m(X) and ∆_M(X), related to the midlines of equilateral triangles, and discuss the relation between the heights and midlines in equilateral triangles. We give estimates for these geometric constants in terms of other geometric parameters, and the geometric constants are used to discuss geometric properties such as uniform non-squareness, uniform normal structure, and the fixed point property.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2009년도 추계학술대회 논문집
• /
• pp.581-582
• /
• 2009

• KIEAE Journal
• /
• 제16권3호
• /
• pp.35-46
• /
• 2016

Purpose: This paper aims to analyse the composition system of architectural elements including shape, kinetic and material elements of kinetic facades and establish the design parameter system as a common conceptual and practical knowledge sharing platform with mechanical and electrical experts. Method: This research has been conducted in a three steps. At first, 120 cases of external shading devices are analyzed and their classification criteria have been established. Secondly geometric, kinetic and material elements are categorized in a common kinetic facade coordinates system considering environmental effects and operation method, and the applicability of combination of each element are tested. Lastly core design parameters for each element have been established in a common office building installation coordinate. Result: Geometry elements are categorized into seven geometric shapes and kinetic elements is categorized into basic linear and rotational motion and combinational folding and rolling motion. The combined set of parameters for three elements composes the whole design parameters for architectural elements of kinetic façade. Design parameters of shape elements are composed of shape, installation and arrangement parameters; design parameters for kinetic elements are composed of axis and range parameters; and design parameters of material elements are composed of thermal, lighting and color parameters.

• 한국방사선학회논문지
• /
• 제13권3호
• /
• pp.399-406
• /
• 2019

본 연구의 목적은 디지털 혈관 조영 촬영장치를 이용한 검사 시 X선관, 환자 테이블, 검출기 또는 환자 등의 기하학적 특성에 따라 실무자가 수시로 변화시켜 적용할 수 있는 매개변수에 대해 알아보고 이에 따른 환자 및 의료진의 방사선 피폭선량을 감소시키는 방안에 대해 알아보고자 하였다. 기하학적 특성들에 따라 각각 fluoroscopy mode와 Digital subtraction angiography로 촬영하고 유효 선량으로 환산한 값을 비교하였다. 연구결과 FPS mode에 따른 선량은 FPS mode를 낮게 설정할수록 선량이 30-40%까지 감소하였다. X선관 각도에 따른 선량은 AP View에서 가장 높게 측정되었고 머리 방향으로 각도가 들어갈수록 선량이 낮게 측정되었다. FOV가 확대될수록 선량이 1.2-1.6배 증가하였고 X선관과 테이블의 거리가 가까워질수록 약 10% 증가하였다. X선관과 평판형 검출기의 거리가 100 mm 멀어질수록 선량이 20-30% 증가하였다. 결론적으로 혈관 조영검사 시 다양한 기하학적 특성들은 실무자가 수시로 변화시켜 적용할 수 있는 매개변수이며 다양한 상황에서 적합한 기하학적 특성들을 고려하여 적용함으로써 적절한 선량 감소 효과를 기대할 수 있다.

• Communications for Statistical Applications and Methods
• /
• 제27권1호
• /
• pp.65-77
• /
• 2020

Geometric charts are effective in monitoring the fraction nonconforming in high-quality processes. The in-control fraction nonconforming is unknown in most actual processes; therefore, it should be estimated using the Phase I sample. However, if the Phase I sample size is small the practitioner may not achieve the desired in-control performance because estimation errors can occur when the parameters are estimated. Therefore, in this paper, we adjust the control limits of geometric charts with the bootstrap algorithm to improve the in-control performance of charts with smaller sample sizes. The simulation results show that the adjustment with the bootstrap algorithm improves the in-control performance of geometric charts by controlling the probability that the in-control average run length has a value greater than the desired one. The out-of-control performance of geometric charts with adjusted limits is also discussed.

• Korean Journal of Geomatics
• /
• 제5권1호
• /
• pp.35-42
• /
• 2005

Precise geometric registration is required in multi-source data fusion process to obtain synergistic results successfully. However, most of the previous studies focus on the assumption of perfect registration or registration in a limited local area with intuitively derived simple geometric model. In this study, therefore, we developed a robust method for geometric registration based on a systematic model that is derived from the geometry associated with the data acquisition processes. The key concept of the proposed approach is to utilize smooth planar patches extracted from LIDAR data as control surfaces to adjust exterior orientation parameters of the aerial images. Registration of the simulated LIDAR data and aerial images was performed. The experimental results show that the RMS value of the geometric discrepancies between two data sets is decreased to less than ${\pm}0.30\;m$ after applying suggested registration method.

• 제어로봇시스템학회논문지
• /
• 제9권12호
• /
• pp.1048-1054
• /
• 2003

In laser surface hardening processes, the geometrical parameters such as the depth and the width of a hardened layer can be utilized to assess the hardened layer quality. However, accurate monitoring of the geometrical parameters for on-line process control as well as for on-line quality evaluation is very difficult because the hardened layer is formed beneath a material surface and is not visible. Therefore, temperature monitoring of a point of specimen surface has most frequently been used as a process monitoring method. But, a hardened layer depends on the temperature distribution and the thermal history of a specimen during laser surface hardening processing. So, this paper describes the estimation results of the geometric parameters using multi-point surface temperature monitoring. A series of hardening experiments were performed to find the relationships between the geometric parameters and the measured temperature. Estimation results using a neural network show the enhanced effectiveness of multi-point surface temperature monitoring compared to one-point monitoring.