• 한국한의학연구원논문집
• /
• 제9권2호
• /
• pp.121-130
• /
• 2003

The goal of this study is construction and efficacy evaluation of MPC-25 (Magnetic Pain Control-25), a medical device using magnetic stimulation. MPC-25 consists of a main body containing power supply and control module and a bed containing magnetic core and coil. In distinction from electric pain control medical devices, magnetic pain control system is non-contact, so the patients need not take off their clothes to be treated. High amplitude current pulses are applied to a magnetic coil and induce time varying magnetic field generating eddy current in a conductor like human body. Clinical efficacy test was performed in patients suffering from musculoskeletal pain of lumbar, shoulder and joint. Degree of pain before and after treatment for 30 minutes was compared using Visual Analogous Scale. As a result, 14 cases out of 20 showed decreased pain perception, so the rate of efficacy is 70%. Reduction of pain perception was statistically significant (P=0.001 by Wilcoxon Signed Rank Test).

• 자원ㆍ환경경제연구
• /
• 제15권4호
• /
• pp.693-712
• /
• 2006

하이브리드 시스템의 최적 설계 및 운영을 위한 프로그램으로 해외의 여러 곳에서 활용중인 Homer를 사용하여 현재 디젤발전기를 전원으로 사용하고 있는 독립계통의 도서지역에 신 재생에너지원의 조합으로 구성된 하이브리드 시스템을 보급할 경우의 타당성 분석을 시도하였다. 에너지기술연구원의 풍속자료, 일사량, 온도자료 등을 근거로 추자도, 거문도, 그리고 영산도를 평가대상으로 선정하였다. 해당지역의 전력부하 자료는 부분적으로 실측된 자료를 바탕으로 재구성하였으며, 시스템 구성 발전기들의 비용 자료는 국내 관련 자료가 미비한 관제로 해외 시장의 자료를 이용하였다. 추자도, 거문도, 영산도의 평가결과가 각각 278원/kWh, 234원/kWh 그리고 353원/kWh으로 나타났다. 정부 보조금에 의한 디젤발전시스템의 발전단가가 300원/kWh($0.300/kWh)인 것을 고려한다면, 추자도와 거문도는 자체적으로 경제성을 확보하는 반면 영산도의 경우는 그렇지 못함을 알 수 있다. 이러한 결과 차이는 기본적으로 해당지역의 재생에너지 자원조건의 차이, 그 중에서도 특히 풍력자원의 차이에 기인하는 것으로 나타난다. 결론적으로 독립계통의 도서지역에 대한 신 재생복합전력시스템의 도입은 경제성 평가의 결과에 의거해야 하며 모든 도서지역이 이 조건을 충족시키는 것이 아님을 지적한다.

• 정보처리학회논문지:소프트웨어 및 데이터공학
• /
• 제6권9호
• /
• pp.419-428
• /
• 2017

임베디드 시스템에서는 모듈간의 상호작용으로 데이터를 주고 받는다. 이때 오류가 포함된 리소스 데이터를 전달하면 시스템의 실행 오류를 유발할 수 있다. 상호작용에 활용되는 리소스들은 모듈간의 의존관계를 만들며 의존관계에 있는 모듈의 변화가 다른 모듈의 기능에 영향을 미치게 된다. 몇몇 임베디드 시스템 조사 자료에 따르면 모듈간의 상호작용 오류가 심각한 소프트웨어 실패의 원인이 되기도 한다. 상호작용 테스팅 단계에서는 이러한 상호작용 오류를 검출하여 시스템 실패의 위험을 낮추고자 한다. 모듈간의 상호작용은 직접 또는 간접적으로 일어난다. 직접적인 상호작용은 모듈의 직접 호출을 통해 이루어지며, 간접 상호작용은 직접호출 이외에 리소스 데이터의 의존성을 통해 나타난다. 이 연구에서는 직접 상호작용에 의한 오류 검출 방식에서는 발견되지 않는 간접 상호작용과 연관된 오류를 검출하고자 한다. 먼저 상호작용 패턴을 분석하여 상호작용 모델을 생성하고 이를 기반으로 상호작용 오류를 검출하는 테스트 케이스 디자인 방법을 제안한다. 마지막으로 결함 주입 기법을 이용하여 제안된 방법의 효용성 및 실효성을 분석한다.

• Journal of information and communication convergence engineering
• /
• 제18권2호
• /
• pp.123-131
• /
• 2020

After observing that most tourists plan to complete their visits to multiple cultural heritage sites within one day, we surmised that for many museum visitors, the foremost thought is with regard to the amount of time is to be spent at each location and how they can maximize their enjoyment at a site while still balancing their travel itinerary? Recommendation systems in e-commerce are built on knowledge about the users' previous purchasing history; recommendation systems for museums, on the other hand, do not have an equivalent data source available. Recent solutions have incorporated advanced technologies such as algorithms that rely on social filtering, which builds recommendations from the nearest identified similar user. Our paper proposes a different approach, and involves providing dynamic recommendations that deploy social filtering as well as content-based filtering using term frequency-inverse document frequency. The main challenge is to overcome a cold start, whereby no information is available on new users entering the system, and thus there is no strong background information for generating the recommendation. In these cases, our solution deploys statistical methods to create a recommendation, which can then be used to gather data for future iterations. We are currently running a pilot test at Chao Samphraya national museum and have received positive feedback to date on the implementation.

• 천문학회지
• /
• 제37권4호
• /
• pp.151-157
• /
• 2004

It is investigated quantitative relations between the magnetic storm magnitude and the solar wind parameters such as the Interplanetary Magnetic Field (hereinafter, IMF) magnitude (B), the southward component of IMF (Bz), and the dynamic pressure during the main phase of the magnetic storm with focus on the role of the interplanetary shock (hereinafter, IPS) in order to build the space weather fore-casting model in the future capable to predict the occurrence of the magnetic storm and its magnitude quantitatively. Total 113 moderate and intense magnetic storms and 189 forward IPSs are selected for four years from 1998 to 2001. The results agree with the general consensus that solar wind parameter, especially, Bz component in the shocked gas region plays the most important role in generating storms (Tsurutani and Gonzales, 1997). However, we found that the correlations between the solar wind parameters and the magnetic storm magnitude are higher in case the storm happens after the IPS passing than in case the storm occurs without any IPS influence. The correlation coefficients of B and $BZ_(min)$ are specially over 0.8 while the magnetic storms are driven by IPSs. Even though recently a Dst prediction model based on the real time solar wind data (Temerin and Li, 2002) is made, our correlation test results would be supplementary in estimating the prediction error of such kind of model and in improving the model by using the different fitting parameters in cases associated with IPS or not associated with IPS rather than single fitting parameter in the current model.

• 정보과학회 논문지
• /
• 제42권8호
• /
• pp.1022-1030
• /
• 2015

최근에 제조되는 스마트폰들이 점점 다양한 인터페이스 장비와 사용자 주변 환경을 인식하는 센서 장비를 포함하게 되면서, 어플리케이션을 개발 시 주어진 장비들을 활용함으로 인해 증가된 개발 및 테스팅 복잡도를 효과적으로 제어하는 것이 중요하게 되었다. 이는 기존의 이벤트 기반 혹은 사용자가 지정한 입력만을 사용하여 테스트를 수행하는 연구로는 한계가 있음을 의미하며 대상 어플리케이션과 상호작용하는 주변 기기를 특정하여 이들로부터 구체적인 실행 환경 조합을 체계적으로 생성하는 연구가 필요하고 할 수 있다. 본 연구에서는 안드로이드 어플리케이션과 함께 배포되는 퍼미션 정보를 기반으로 어플리케이션의 기능에 영향 주는 주변 기기들을 분석한 후 이를 기반으로 외부 환경 조건들을 자동으로 생성하는 방법을 제안한다. 마지막으로 오픈소스에 본 연구기법을 적용하여 코드 커버리지가 향상됨을 보임으로써 본 연구의 효과성을 검증하였다.

• 한국포장학회지
• /
• 제28권2호
• /
• pp.143-149
• /
• 2022

PCS needs to freely switch AC and DC to connect the battery, external AC loads and renewable energy in both directions for energy efficiency. Whenever converting happens, power loss inevitably occurs. Minimization of the power loss to save electricity and convert it for usage is a very critical function in PCS. PCS plays an important role in the ESS(Energy Storage System) but the importance of stabilizing semiconductors on PCB(Printed Circuit Board) should be empathized with a risk of failure such as a fire explosion. In this study, the temperature variation inside PCS was reviewed by cooling fan on top of PCS, and the vibration characteristics of PCS were analyzed during truck transportation for reliability of the product. In most cases, a cooling fan is mounted to control the inner temperature at the upper part of the PCS and components generating the heat placed on the internal aluminum cooling plate to apply the primary cooling and the secondary cooling system with inlet fans for the external air. Results of CFD showed slightly lack of circulating capacity but simulated temperatures were durable for components. The resonance points of PCS were various due to the complexity of components. Although they were less than 40 Hz which mostly occurs breakage, it was analyzed that the vibration displacement in the resonance frequency band was very insufficient. As a result of random-vibration simulation, the lower part was analyzed as the stress-concentrated point but no breakage was shown. The steel sheet could be stable for now, but for long-term domestic transportation, structural coupling may occur due to accumulation of fatigue strength. After the test completed, output voltage of the product had lost so that extra packaging such as bubble wrap should be considered.

• 대한치과보철학회지
• /
• 제45권4호
• /
• pp.431-443
• /
• 2007

Statement of problem: Injuries along with discomfort may result on the oral mucosa when non-rigid material is used as the major connector in construction of RPD, since nonrigid major connectors transmit unstable forces throughout the appliance. Titanium which recently draws attention as a substitute of Co-Cr had a difficulty in fabricating due to high melting temperature but the development of casting technique makes it possible to apply to the clinical case. Purpose: The purpose of this study was to investigate the rigidity and the castability of titanium upper major connector by design and make a comparison with Co-Cr major connectors which are widely used in clinical cases now. Material and methods: Casting was done using CP-Ti(Grage 2) (Kobe still Co., Japan) for the experimental groups, and 4 various designs namely palatal strap, U-shaped bar, A-P strap, and complete palatal plate were casted and 5 of each designs were included in each group. For the experimental group, Universal testing machine (Model 4502; Instron, Canton, Mass) was used to apply vertical torsional force vertically to the horizontal plane of major connector. In the second experiment, Vertical compressive force was applied to the horizontal plane of major connector. As a comparative group, Co-Cr major connector was equally manufactured and underwent the same experimental procedures Strain rate was measured after constant loading for one minute duration, and statistical analysis was done with SPSS ver.10.0 for WIN(SPSS. Inc. USA). From the one-way ANOVA and variance analysis (P=0.05), Scheffe's multiple comparison test implemented. Results: 1. Least amount of strain was observed with complete palatal plate followed by A-P bar, palatal bar, and the U-shaped bar having most amount of strain. 2. In all designs of titanium major connector, less strain rate was observed under compressive loading than under torsional loading showing more resistance to lateral force. 3. For titanium major connector, less strain rate was observed when the force is applied to the first premolar area rather than to the second molar area indicating more strength with shorter length of lever. 4. In Comparison of Co-Cr major connector with titanium major connector, palatal strap and U-shaped bar designs showed higher strength under torsional force that is statically significant, and under compressive force, no significant difference was observed expert for U-shaped bar. 5. In titanium major connector, complete palatal plate showed lowest success rate in casting when compared with the Co-Cr major connector. Conclusion: Above results prove that when using titanium for major connector, only with designs capable of generating rigidity can the major connector have almost equal amount of rigidity as Co-Cr major connector and show lower success rate in casting when compared with the Co-Cr major connector.

• 유통과학연구
• /
• 제16권9호
• /
• pp.65-77
• /
• 2018

Purpose - A trading area is very closely related to consumer life. A trading area is a cultural and social space that consumes culture and promotes human relationships as well as an economic space where consumers live their daily lives. In this context, a trading area research should be conducted objectively and empirically because it deals with the activities of consumer's life. The purpose of this study is to identify the intrinsic psychological motivation(push motivation) caused when consumers visit a trading area and to demonstrate how the push motivation for a trading area influence on consumer's flow, satisfaction, revisit intention. Research design, data, and methodology - In order to develop research hypotheses for this study, the development procedures for push motivation scale are as follows; (1) generating initial pool of items based on previous studies, (2) expert judgement to evaluate content and face validity, and (3) assessing convergent and discriminant validity using confirmatory factor analysis. In order to achieve these purposes, online surveys were conducted on frequent or familiar visitors to the trading areas around the Gangnam, Kunkuk University and Hongik University Station. Among the 1,343 questionnaires collected, 1,157 cases were analyzed by using SPSS 22.0 and SmartPLS 3.0 statistical package program, except for 186 responses in which responses were judged to be unfaithful. Results - The push motivation was classified into five sub-dimensions of excitement/stimulus, rest/relaxation, exit/refreshing, knowledge/learning and human relationship promotion as multidimensional and complex factors composed of individual and social-related dimensions. The excitement/stimulus and human relationship promotion of push motivation have positive effects on satisfaction. However, all dimensions of the push motivation have positive effects on flow. And flow has a positive effect on satisfaction and revisit intention. Meanwhile, the mediation test using boostrapping shows that flow plays a full mediating role in the relationship between rest/relaxation, exit/refreshing, knowledge/learning and satisfaction, but a partial mediating rol e between excitement/stimulus, human relationship promotion and satisfaction. Finally, satisfaction plays a partial mediating role between flow and revisit intention. Conclusions - This study shows that the push motivation is multidimensional and compositive depending on the situation of a consumer. In addition, it is found that the human relationship promotion(a social-related motivation) has a much more important effect on flow and satisfaction than other push motivations of individual dimensions. It also shows that satisfaction increases when consumers are being flowed at their visit and degree of revisit intention also grows as satisfaction increases. As implications of this study, a marketer should try to understand consumer's visit motivation at first and then develop factors that increase their flow, satisfaction, revisit intention. It also requires a marketer to approach subjects on a trading area more objectively and empirically based on the psychology and behavior of consumers, in order to establish a proper and efficient strategy on development of a trading area.

• 한국산학기술학회논문지
• /
• 제14권3호
• /
• pp.1451-1458
• /
• 2013

이 논문은 콤비나토리얼 문제인 조합(combination)과 순열(permutation), r-순열(r-permutation) 규칙에 의거하여 전수데이터를 생성하는 빠른 프로그램과 알고리즘을 다룬다. 이들 프로그램은 전수데이터 검사나 시뮬레이션의 입력값 선정과 같은 응용에서 사용된다. 본 연구에서는 조합, 순열, r-순열 문제의 규칙을 만족하는 프로그램들을 수집하여 부문별로 가장 빠른 프로그램을 선정하고 추가연구를 통하여 수집된 프로그램보다 수행시간을 단축한 프로그램을 완성하였다. 본 연구를 위해서 다음과 같은 선행조사가 이루어졌다. 첫째 인터넷에 공지된 백 개 이상의 프로그램을 수집하고 완성하였다. 둘째, 확보된 프로그램을 구동하여 수행시간을 측정하였고, 그 결과 가장 빠르게 수행하는 프로그램을 부분별로 발췌하였다. 셋째, 선별된 가장 빠른 프로그램에 대해서 알고리즘을 설명하고 의사코드로 정리하였다. 본 논문에서는 이러한 기초작업을 토대로 수행시간이 단축된 프로그램을 완성할 수 있었다. 첫째로 조합 문제에서는 재귀형식에서 비재귀형식으로 변형시켰고, 둘째로 r-순열 문제에서는 조합 프로그램과 순열 프로그램을 결합하는 방법으로 수행시간을 단축하였다. 분석결과에 따르면 전자와 후자는 수집한 가장 빠른 프로그램에 비해서 수행속도를 각각 22%에서 34%, 및 62%에서 226%의 범위로 개선하였다. 본 논문에서 제공한 의사코드를 바탕으로 응용에 쉽게 적용시킬 수 있으며, 전수조사 방법에 소요되는 수행시간을 예측하여 전수조사의 타당성 여부를 결정할 수 있다. 또한, 제공한 코드를 바탕으로 최소의 시간으로 전수데이터를 생성할 수 있다.