• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.47 no.1
• /
• pp.28-37
• /
• 2010

In this paper, the IC (Integrated Circuit) for multi-channel asynchronous communication was designed by using FPGA and VHDL language. The existing chips for asynchronous communication that has been used commercially are composed of one to two channels. Therefore, when communication system with two channels or more is made, the cost becomes high and it becomes complicated for communication system to be realized and also has very little buffer, load that is placed into Microprocessor increases heavily in case of high speed communication or transmission of high-capacity data. The designed IC was improved the function and performance of communication system and reduced costs by designing 8 asynchronous communication channels with only one IC, and it has the size of transmitter/receiver buffer with 256 bytes respectively and consequently high speed communication became possible. To detect errors between communications, it was designed with digital filter and check-sum logic and channel MUX logic so that the malfunction can be prevented and errors can be detected more easily and input/output port regarding each communication channel can be used flexibly and consequently the reliability of system was improved. It was composed and simulated logic of VHDL described by using Cyclone II Series EP2C35F672C8 and QuartusII V8.1 of ALTERA company. In order to show the performance of designed IC, the test was conducted successfully in QuartusII simulation and experiment and the excellency was compared with TL16C550A of TI (Texas Instrument) company and ATmegal28 general-purpose micro controller of ATMEL company that are used widely as chips for asynchronous communication.

• Journal of Korea Technology Innovation Society
• /
• v.17 no.3
• /
• pp.540-562
• /
• 2014

Although the impact of technological partner selection on the success of technological alliance is critical, little attention has been paid to the area of technological alliance partner selection criteria and the relationship between partner selection criteria and success factors of alliance. This study bridges this gap by understanding previous studies of general alliance partner selection criteria such as marketing, international, logistics and production alliances. I drew technological alliance partner selection criteria using AHP method with 12 experts who are currently in charge of technological alliance activities at Korean Venture Companies. This study found 4 criteria such as 'task-related', 'partner-related', 'learning-related', 'risk-related' criteria with 14 items and the relative importance of technological alliance partner selection showed as follows: 'risk-related', 'learning-related', 'partner-related', 'task-related' criteria. In order to test the relationship between technological partner selection criteria and performance, I used 215 survey data of Korean Venture Companies. The results showed that 'partner-related' and 'task-related' criteria had strong positive impacts on the success of technological alliance. Further, I put 4 moderating variables into the study model in order to see their moderating effects. However, no moderating variable showed significant effects. In conclusion section, I discussed the findings and implications of this study and directions for future studies.

• International Journal of Highway Engineering
• /
• v.17 no.3
• /
• pp.49-58
• /
• 2015

PURPOSES : The use of environmentally friendly construction methods has been recently encouraged to reduce fuel consumption and the effects of global warming. For this purpose, the roller compacted concrete pavement (RCCP) construction method has been developed. RCCP is more environmentally friendly and economically efficient than general concrete by reducing the amount of CO2 generated through the application of a smaller amount of cement. RCCP has a number of advantages such as an easy construction method, low cost, high structural hydration performance, and aggregate interlocking. However, mix design standards and construction guidelines of RCCP are required for domestic application. In addition, a study on aggregate selection, which has an effect on the characteristics of RCCP, is necessary owing to a limited number of researches. Thus, the aggregate effect on the performance of RCCP in securing the required strength and workability was evaluated in consideration of domestic construction. METHODS : Sand and coarse aggregates of both 19mm and 13mm in maximum size were used in this study. Four types of aggregate gradations (s/a = 30%, 58%, and 70% for the sand and coarse aggregate of 19mm in maximum size, and s/a = 50% for a combination of the three types of aggregates) were set up to investigate the effects of the PCA band on the RCC characteristics. The conditions of s/a = 30% and 70% were evaluated to check the gradation effect outside of the recommended band. The conditions of s/a = 58% and 50% were used because they are the optimum combination of the two and three types of aggregates, respectively. RCCP gradation band was suggested gradation with a proper construction method of RCCP by synthetically comparing and analyzing the correlation of optimum water content, maximum dry density, and strength of requirements through its consistency and compaction test. RESULTS : The lower and upper limit lines are insufficient to secure a relatively strong development and workability compared to an aggregate gradation in the RCCP gradation band region. On the other hand, the line in the RCCP gradation band and the 0.45 power curve in the RCCP gradation band region were satisfactory, ensuring the required strength and workability. CONCLUSIONS : The suitable aggregate gradation on RCCP process should meet the RCCP gradation band area; however, fine particles passing through a #60 sieve do not need to be within the recommended gradation band because the influence of this region on such fine particles is small.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.11C
• /
• pp.1085-1097
• /
• 2009

We present a structure and design method of the D8PSK modem compatible with the VDL mode-2 standard and performance test results of the developed modem. In VDL mode-2, the raised cosine filter is used only in the transmitter and a general low pass filter is used in the receiver. Consequently, we can not achieve ISI reduction but can have better spectrum characteristics. Although there is 1~2 dB performance degradation with an un-matched filter compared to that with a matched filter, it is more important to minimize adjacent channel interference in narrow band communications. The transmit signal is generated digitally to avoid the problems(I/Q imbalance and DC offset etc.) of analog modulators. In addition the digital down converter using digital IF sampling technique is adopted for the receiver. This paper contains the overall configuration, design method and simulation results based in part on the previously proposed structures and algorithms. It is confirmed that the modem transmits and receives messages successfully at a speed of max. 870 km/h over ranges of up to 310 km through the ground and in-flight communication tests.

• Journal of dental hygiene science
• /
• v.17 no.6
• /
• pp.533-542
• /
• 2017

This study aimed to develop a measure of professional identity for Korean dental hygienists and to analyze the factors and characteristics of professional identity of these dental hygienists. In this study, 890 dental hygienists completed a self-administered survey. The final analysis was conducted with a total of 880 responses, excluding 10 questionnaires with unreliable responses and partial responses. A systematic literature review was conducted to establish the definition of professional identity, while content validity, exploratory factor, confirmatory factor, and reliability analysis were conducted to establish the constructive factors. Descriptive statistics, independent sample t-test, and one-way ANOVA were used to identify the level of each factor. Authors conceptualized the professional identity for Korean dental hygienists and item generation, item reduction, and questionnaire formatting. The developed measure of professional identity for dental hygienists consisted of five factors, with 15 items. "Sense of calling," "need for academic capacity building," "performance of delegated authority," "compliance of code of ethics," and "usage of professional organizations" were the constituent factors. Based on these factors, the level of professional identity was the highest in the "performance of delegated authority" and lowest in the "usage of professional organizations." These finding indicated that dental hygienists with higher education levels have higher professional identity levels. The dental hygienists working at the general/university hospital had the highest level of professional identity. Thus, further research is needed to establish a model that consists of factors affecting and influencing the professional identity of dental hygienists.

• Corrosion Science and Technology
• /
• v.9 no.4
• /
• pp.147-152
• /
• 2010

Conventional paints for conversion coating applications in steel production derived mainly from water-based polymer dispersions containing several additives actually show good general performance, but suffer from poor scratch and abrasion resistance during use. The reason for this is because the relatively soft organic binder matrix dominates the mechanical surface properties. In order to maintain the high quality and decorative function of coated steel sheets, the mechanical performance of the surface needs to be improved significantly. In fact the wear resistance should be enhanced without affecting the optical appearance of the coatings by using appropriate nanoparticulate additives. In this direction, nanocomposite coating compositions (Nanomer$^{(R)}$) have been derived from water-based polymer dispersions with an increasing amount of surface-modified nanoparticles in aqueous dispersion in order to monitor the effect of degree of filling with rigid nanoparticles. The surface of nanoparticles has been modified for optimum compatibility with the polymer matrix in order to achieve homogeneous nanoparticle dispersion over the matrix. This approach has been extended in such a way that a more expanded hybrid network has been condensed on the nanoparticle surface by a hydrolytic condensation reaction in addition to the quasi-monolayer type small molecular surface modification. It was expected that this additional modification will lead to more intensive cross-linking in coating systems resulting in further improved scratch-resistance compared to simple addition of nanoparticles with quasi-monolayer surface modification. The resulting compositions have been coated on zinc-galvanized steel and cured. The wear resistance and the corrosion protection of the modified coating systems have been tested in dependence on the compositional change, the type of surface modification as well as the mixing conditions with different shear forces. It has been found out that for loading levels up to 50 wt.-% nanoparticles, the mechanical wear resistance remains almost unaffected compared to the unmodified resin. In addition, the corrosion resistance remained unaffected even after $180^{\circ}$ bending test showing that the flexibility of coating was not decreased by nanoparticle addition. Electron microscopy showed that the inorganic nanoparticles do not penetrate into the organic resin droplets during the mixing process but rather formed agglomerates outside the polymer droplet phase resulting in quite moderate cross linking while curing, because of viscosity. The proposed mechanisms of composite formation and cross linking could explain the poor effect regarding improvement of mechanical wear resistance and help to set up new synthesis strategies for improved nanocomposite morphologies, which should provide increased wear resistance.

• Journal of KIISE
• /
• v.42 no.8
• /
• pp.998-1009
• /
• 2015

In recent years, there has been a growing interest in RDFS Inference to build a rich knowledge base. However, it is difficult to improve the inference performance with large data by using a single machine. Therefore, researchers are investigating the development of a RDFS inference engine for a distributed computing environment. However, the existing inference engines cannot process data in real-time, are difficult to implement, and are vulnerable to repetitive tasks. In order to overcome these problems, we propose a method to construct an in-memory distributed inference engine that uses a parallel graph structure. In general, the ontology based on a triple structure possesses a graph structure. Thus, it is intuitive to design a graph structure-based inference engine. Moreover, the RDFS inference rule can be implemented by utilizing the operator of the graph structure, and we can thus design the inference engine according to the graph structure, and not the structure of the data table. In this study, we evaluate the proposed inference engine by using the LUBM1000 and LUBM3000 data to test the speed of the inference. The results of our experiment indicate that the proposed in-memory distributed inference engine achieved a performance of about 10 times faster than an in-storage inference engine.

• Journal of the Korean Society for Railway
• /
• v.20 no.3
• /
• pp.311-319
• /
• 2017

The primary suspension system of a railway vehicle restrains the wheelset and the bogie, which greatly affects the dynamic characteristics of the vehicle depending on the stiffness in each direction. In order to improve the dynamic characteristics, different stiffness in each direction is required. However, designing different stiffness in each direction is difficult in the case of a general suspension device. To address this, in this paper, an optimization technique is applied to design different stiffness in each direction by using a conical rubber spring. The optimization is performed by using target and analysis RMS values. Lastly, the final model is proposed by complementing the shape of the weak part of the model. An actual model is developed and the reliability of the optimization model is proved on the basis of a deviation average of about 7.7% compared to the target stiffness through a static load test. In addition, the stiffness value is applied to a multibody dynamics model to analyze the stability and curve performance. The critical speed of the improved model was 190km/h, which was faster than the maximum speed of 110km/h. In addition, the steering performance is improved by 34% compared with the conventional model.

• Journal of IKEEE
• /
• v.23 no.3
• /
• pp.1088-1091
• /
• 2019

In this paper, a real-time monitoring system for environmental safety by living area is proposed. The proposed system is designed to measure radiation, fine dust and basic living information (temperature) using fixed and mobile measuring equipment, and constitutes a web database that stores data received from the equipment. It also develops web programs for displaying received data on PCs and mobile phones. The results of testing the performance of the system by an authorized testing agency showed that the radiation measurement range was measured in the range of $10{\mu}Sv/h$ to 10mSv/h, which is comparable to the world's highest level, and that the accuracy was measured between ${\pm}6.7$ and ${\pm}8.7$ percent of the measurement uncertainty was measured and normal operation at or below the international standard of ${\pm}15$ percent. In addition, the temperature test was conducted on a section of $-20^{\circ}C$ to $50^{\circ}C$ and normal operation was confirmed in response to the temperature change. Stability of radiated electromagnetic waves was ensured by a suitable judgment. The product's testing in general and high and low temperature environments for about four months after the prototype was made confirmed to be more than five years of durability. The measurement range and accuracy of fine dust sensors are compared with those of companies that measure the air environment, and the performance level is similar through the air quality measurement register.

• Korean Journal of Community Nutrition
• /
• v.24 no.1
• /
• pp.47-59
• /
• 2019

Objectives: Young athletes require adequate nutrition to maintain their athletic performance, growth and health. This study examined the status and needs of nutrition management and meal services for student athletes among the athlete's parents. Methods: The subjects were parents of elementary, middle, and high school athletes (n=323) from 18 schools participating mainly in the Sports Food Truck. The questionnaire included general characteristics, status and needs on nutrition management and meal service for student athletes, and satisfaction with the Food Truck. The survey was done during 2018. The data were analyzed according to the school groups using a ${\chi}^2-test$ or ANOVA. Results: Approximately 45% of subjects had difficulty in the nutrition management of athletes, and 87.1% had not received nutrition education. Approximately 74% wanted nutrition education held for athletes, and mainly wanted topics on nutrition management for health and eating for athletic performance. The preferred methods were lectures and cooking activity. The responses on the necessity of nutrition education for athletes, desired education topics, and desired times for education differed significantly according to the school groups (p<0.05). Most subjects also wanted nutrition information mainly through SNS. In the athlete's meal, breakfast and snacks were highlighted as the meal to supplement. Approximately 90.3% responded that providing a meal service is necessary. The subjects preferred snacks before/after exercise and dinner if a meal service was provided. They preferred Korean food, followed by snacks, and a dish meal. As the meal type, the subjects wanted the Food Truck and packed meal. The responses on necessity of a meal service (p<0.05), preferred food (p<0.001), and meal type (p<0.001) in the meal service differed significantly according to the school groups. Approximately 43% were satisfied with the Food Truck and 50.8% responded as average. They made suggestions for the Food Truck in terms of foods, operations and frequency. Conclusions: Based on the study results, nutrition education and meal service may support nutrition for student athletes considering the needs of the parents according to the school groups.