• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.16 no.2
• /
• pp.97-101
• /
• 2003

New Pt/Ti and hi/Ti double-metal structures have been investigated for the application of a diffusion barrier between Cu and Si in deep submicron integrated circuits. Pt/Ti and Ni/Ti were deposited using E-beam evaporator at room temperature. The performance of Pt/Ti and Ni/Ti structures as diffusion barrier against Cu diffusion was examined by charge pumping method, gate leakage current, junction leakage current, and SIMS(secondary ion mass spectroscopy). These evaluation indicated that Pt/Ti(200${\AA}$/100${\AA}$) film is a good barrier against Cu diffusion up to 450$^{\circ}C$.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2004.04b
• /
• pp.9-12
• /
• 2004

This paper investigated the stability of Ta-Mo alloy on thin gate dielectric. Ta-Mo alloy was deposited by using co-sputtering process after thermal growing of 3.4nm and 4.2nm silicon dioxide. When the sputtering power of Ta and Mo were 100W and 70W, respectively, the suitable work function for NMOS gate electrode, 4.2eV, could obtain. To prove interface thermal stability of thin film gate dielectric and Ta-Mo alloy, rapid thermal annealing was performed at $600^{\circ}C$ and $700^{\circ}C$ for 10sec in Ar ambient. The results of interface reaction were surveyed by change of silicon dioxide thickness and work function after annealing process. Also, the reliability of alloy gate and gate dielectric could be confirmed by quantity of leakage current. Ta-Mo alloy was showed low sheet resistance and thermal stability, namely, little change of gate dielectric and work function, after $700^{\circ}C$ annealing process.

• The KIPS Transactions:PartA
• /
• v.15A no.4
• /
• pp.211-216
• /
• 2008

In this paper we fabricated and measured the $0.26{\mu}m$ NMOSFET with wet gate oxide and nitride oxide gate to compare that the charateristics of hot carrier effect, charge to breakdown, transistor Id_Vg curve, charge trapping, and SILC(Stress Induced Leakage Current) using the HP4145 device tester. As a result we find that the characteristics of nitride oxide gate device better than wet gate oxide device, especially hot carrier lifetime(nitride oxide gate device satisfied 30 years, but the lifetime of wet gate oxide was only 0.1 year), variation of Vg, charge to breakdown, electric field simulation and charge trapping etc.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.23 no.2
• /
• pp.129-138
• /
• 2018

Previous single-phase transformerless inverters used active bypass switching circuits that need auxiliary power switches to minimize ground leakage current. However, switching and gate driving losses are increased due to the use of additional power switches. To cope with this drawback, this work proposes a transformerless inverter using a passive bypass filter without any auxiliary power switch. The operation and control of the proposed inverter are described. The ground leakage current characteristics are analyzed for the proposed inverter with the passive bypass filter. The experimental results of the proposed inverter for a 1.0kW prototype system are presented.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.37 no.4
• /
• pp.31-37
• /
• 2000

In the case of metal-induced lateral crystallization (MILC) for low temperature poly-Si TFT, offset length between Ni-thin film and the sides of gate could be modified to control the location of MILC boundary. Electrical characteristics were compared to analyze the effect of MILC boundary that was located either in or out of the channel region of the TFT. By removing the MILC boundary from channel region, on current, subthreshold slope and leakage current properties could be improved. When MILC boundary was located in the channel region, leakage current was reduced with electrical stress biasing. The amount of reduction increased as the channel width increased, but it was independent of the channel length.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.11a
• /
• pp.39-39
• /
• 2009

We fabricated p-channel TFTs based on poly Silicon. The 35nm thickness silicon dioxide layer structure got higher $I_{on}/I_{off}$ ratio, field-effect Mobility and output current than 10nm thickness. And 35nm layer showed low leakage current and threshold voltage. So, 35nm thickness silicon dioxide layer TFTs are faster reaction speed and lower power consumption than 10nm thickness.

• Electrical & Electronic Materials
• /
• v.11 no.10
• /
• pp.94-99
• /
• 1998

Suitable replacement materials for ultrathin SiO2 in deeply scaled MOSFETs such as lattice polarizable films, which have much higherpermittivities than SiO2, have bandgaps of only 3.0 to 4.0 eV. Due to these small bandgaps, the reliability of these films as a gate insulator is a serious concern. Ramped voltage, time dependent dielectric breakdown, and hot carrier effect measurements were done on 190 layers of TiO2 which were deposited through the metal-organic chemical vapor deposition of titanium tetrakis-isopropoxide (TTIP). Measurements of the high and low frequency capacitance indicate that virtually no interface state are created during constant current injection stress. The increase in leakage upon electrical stress suggests that uncharged, near-interface states may be created in the TiO2 film near the SiO2 interfacial layer that allow a tunneling current component at low bias.

• Proceedings of the IEEK Conference
• /
• 2001.06b
• /
• pp.225-228
• /
• 2001

We simulated and analyzed the flicker phenomena in the poly-Si TFT-LCD using PSpice for the development of wide-area and high-quality LCD display We define the electric quantity of flicker in the TFT-LCD, which is the ratio of half frame frequency (30Hz) to DC (0 Hz) frequency. We compared two different types of TFTs, excimer laser annealed (ELA) poly-Si TFT and silicide mediated crystallization (SMC) poly-Si TFT, and found that the ELA and SMC TFTs show different flicker characteristics because of their mobility and leakage current. In addition, we showed that the gate voltage should be chosen carefully at the minimum flicker because of the larger leakage current of poly-Si Tn as compared with a-Si TFT

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.465-465
• /
• 2013

Inorganic 물질인 SiO2 dielectric 위에 organic dielectric PVP (4-vinyphenol)를 spin coating으로 올려, inorganic/organic dielectric 형태의 double layer구조로 High-performance amorphous indiumgallium zinc oxide thin-film transistors (IGZO TFT)를 제작하여 보았다. SiO2 dielectric을 buffer layer로 80 nm, PVP는 10Wt% 400 nm로 구성하였으며, 200 nm single SiO2 dielectric과 동일한 수준의 leakage current 특성을 MIM Capacitor 구조를 통해서 확인할 수 있었다. 이 소자의 장점은 용액공정의 도입으로 공정 시간의 단축 및 원가 절감을 이룰 수 있으며, dielectric과 channel 사이의 균일한 interface의 형성으로 interface trap 개선 및 Yield 향상의 장점을 갖는다. 우리는 실험을 통해서 SiO2 buffer layer가 수직 electric field에 의한 leakage current을 제어하고, PVP dielectric은 interface를 개선하는 것을 확인하였다. Vth의 negative shift 및 slope의 향상으로 구동전압이 줄어들고, 균일한 I-V Curve 형성을 통해서 Process Yield의 향상을 확인하였다.

• Electrical & Electronic Materials
• /
• v.8 no.6
• /
• pp.708-714
• /
• 1995

We have discussed the buried-channel(BC) behavior through the subthreshold characteristics of submicron PMOSFET device fabricated with twin well CMOS process. In this paper, we have guessed the initial conditions of ion implantation using process simulation, obtained the subthreshold characteristics as a function of process parameter variation such as threshold adjusting ion implant dose($D_c$), channel length(L), gate oxide thickness($T_ox$) and junction depth of source/drain($X_j$) using device simulation. The buried channel behavior with these process prarameter variation were showed apparent difference. Also, the fabricated pMOSFET device having different channel length represented good S.S value and low leakage current with increasing drain voltage.