• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2008.05a
• /
• pp.123-126
• /
• 2008

The construction industry highly depends on each specialized manager which is essential to successful project. However, a new employee, who has just graduated from architectural engineering college, is requested additional education for 1~2 years such as On-the-Job-Training (O.J.T) to perform his/her professional job in construction site. It is wasteful for both construction company and the employee in terms of time and cost. The purpose of this paper is to investigate the required abilities and analyze the gap of demanded abilities between field managers and students. To collect data for analysis, questionnaire which uses Likert Scale has been performed to both parts. As a result, the analysis show that the graduate's abilities related to field experience get especially low degrees in compare with non-field experience factors. These results will contribute architectural engineering education in college to make more realized.

• Journal of the Korean institute of surface engineering
• /
• v.44 no.4
• /
• pp.165-171
• /
• 2011

In this work, handling of sapphire substrate for LED by using an electrostatic chuck was studied. The electrostatic chuck consisted of alumina dielectric, which was doped with 1.2 wt% $TiO_2$. As the volume resistivity of alumina dielectric was decreased, the electrostatic force was increased by Johnsen-Rahbek effect. The narrower width and gap size of electrode led to the stronger electrostatic force. When alumina dielectric with $3.20{\times}10^{11}{\Omega}{\cdot}cm$ resistivity and 3 mm width/1.5 mm gap sized electrode was used, the strongest electrostatic force in this work was obtained, which value reached to ~14.46 gf/$cm^2$ at 2.5 kV for 4-inch sapphire substrate. This results show that alumina electrostatic chuck with low resistivity and fine electrode pattern is suitable for handling of sapphire substrate for LED.

• Journal of the Semiconductor & Display Technology
• /
• v.23 no.2
• /
• pp.12-18
• /
• 2024

A Electrostatic chuck is a device that fixes the substrate, using the force between charges applied between two parallel plates to attract substrates such as wafers or OLED panels. Unlike mechanical suction methods, which rely on physical fixation, this method utilizes the force of electrostatics for fixation, making it important to verify the adhesion force. As the size of the substrate increases, deformations due to gravity or chucking force also increase, and the adhesion force decreases rapidly as the distance between the chuck and the substrate increases. The outlook for displays is shifting from small to large OLEDs, necessitating consideration of substrate deformations. In this paper, to confirm the deformation of the substrate through various patterns, a simplified 2D model using Ansys' electromagnetic field analysis program, Maxwell, and the static structural analysis program, Mechanical, was utilized to observe changes in adhesion force according to the variation in the air gap between the substrate and the chuck. Additionally, the chucking force was analyzed for the size of the substrate, and the deformation of the substrate was confirmed when gravity and chucking force act simultaneously.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.17 no.3
• /
• pp.32-45
• /
• 2018

This study aims to compare the mutual perception gap on dangerous driving behavior between male and female drivers in multiple aspects, analyze them, and identify factors that trigger this different perception. To understand the mutual perception gap on dangerous driving behavior, DBQ(Driving Behavior Questionnaire) was applied as a rating scale. By applying results into the Co-oreintation model, this study compared the mutual perception gap between male drivers and female drivers and analyze results. In addition, factors that generate the perception gap between both genders were drawn by analyzing factors. This study suggested that objective consistency identified the perception gap that driving behaviors of others were more dangerous between two genders. In addition, subjective consistency was different as both genders assumed that the counterpart's driving behavior takes more risks than their own actual driving behaviors. In regard to the accuracy, men were aware that female driving behaviors are more dangerous than their behaviors. However, female driving behavior assumed by women was consistent with male perception in all factors, which indicated that women perceive men precisely. In addition, results were compared and analyzed in both perspectives of male drivers and female drivers by combining predictive models. Based on these results, both genders perceived that counterpart's driving behavior is more dangerous among both genders.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.35 no.5
• /
• pp.1111-1121
• /
• 2015

Roundabouts face a congestion problem when there are unbalanced traffic conditions, especially during peak times. The congestion at roundabouts results in long delay times and low level of service. Some research has addressed congestion problems of the metering roundabout, however, few studies have focused on the congestion issues of the double signals metering roundabout. This research bridges this gap through analyzing the congestion issues of the Old Belair double signals roundabout in Adelaide. The research proposes a new analysis method based on a four-nodes intersection in order for double signals roundabout analysis to be carried out as follows: firstly, at the modeling stage, a connection of four individual intersections, adjustment of lane geometry, input of directional traffic volumes, priority and phase time set up are proposed. Secondly, for calibration, PFF, critical gap, follow-up headway and extra bunching values have been applied. The results from the analysis show that the new method is able to analyze the delay time, level of service, degree of saturation and allow for further analysis.

• The Journal of Korean Academy of Sensory Integration
• /
• v.21 no.1
• /
• pp.11-22
• /
• 2023

Objective : The purpose of this study was to examine the effects of using Kinesiology Tape (KT) for drooling in children with cerebral palsy. Methods : A single-case experimental design with an ABA design was conducted. A total of 46 sessions were conducted, consisting of three baseline sessions (A), 40 intervention sessions (B), and three baseline sessions (A'). The Drooling Impact Scale (DIS) and the Interlabial Gap (IG) were measured before and after the KT intervention, and a Goal Attainment Scale (GAS) was assessed to determine whether there was any change in the target activity for each session. The KT intervention was attached to the orbicularis oris muscle. The KT intervention time was set as the time taken for dysphagia intervention and the actual meal time, for up to one hour a day, for a total of eight weeks. Results : The results of the study showed that the KT intervention had an effect on both the DIS and the IG, and that the GAS scale indicated that target activity increased with each session. Conclusion : These results indicate that the KT intervention can easily be applied to children with cerebral palsy who suffer from drooling, whether in clinical practice, by therapists, or caregivers, and that it can be used for various purposes.

• Tribology and Lubricants
• /
• v.24 no.6
• /
• pp.326-331
• /
• 2008

The contact surfaces between mold and target should be in parallel for a proper imprinting process. However, large size of contacting area makes it difficult for both mating surfaces (mold and target planes) to be in all uniform contact with the expected precision level in terms of thickness and position. This is caused by the waviness of mold and target although it is very small relative to the area scale. The gripping force for both mold and target by the vacuum chuck is other major effect to interrupt the uniform contact, which must be avoided in imprinting mechanism. In this study, the cause of non-conformal contact mechanism between mold and target is investigated with the consideration of deformation due to the vacuum gripping for the size $470{\times}370\;mm^2$ LCD panel.

• The Journal of Korean Physical Therapy
• /
• v.16 no.4
• /
• pp.235-245
• /
• 2004

The purposes of this study are to develop 'Squat Scoring Scale' and identify relationship between squatting score and flexibility of the lower extremity muscles such as quadriceps femoris and soleus in terms of relationship between squatting and functions of lower extremity. Subjects have normal gait patterns only with or without musculoskeletal problems of lower extremities, lumbar and pelvis and gender. There are sixty subjects who participated in this study. The scoring are checked after squatting posture according to 'Squat Scoring Scale', and measured ROM of the ankle dorsiflexion and knee flexion for flexibility of the soleus and quadriceps femoris, respectively. Fourteen of sixty subjects have 10 score, seventeen subjects have 9 score, seven subjects have 8, 7 and 6 scores, three subjects have 5 score, and five subjects have 4 score. The gap between 10 to 9, 9 to 8 and 8 to 7 score in all values of angles has the statistical significance for t-test(p<.05). This information indicates that flexibility of quadriceps femoris and soleus acts as important factors in squatting.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2000.11a
• /
• pp.489-494
• /
• 2000

제품과 사용자간에 필연적으로 존재하는 소리를 쾌적하게 하기 위한 연구로서 자연음 6종과 소음 6종의 음압(dB)이 비슷하도록 조절하였을 때 소리의 어떠한 물리적 특성이 긍/부정감성에 주된 영향을 미치는지를 파악하기 위하여 남/녀 각각 35명씩의 대학생들에게 7점척도의 8가지 형용사 쌍을 이용한 음질평가 청감실험을 한 결과 물소리를 포함한 자연음은 소음보다 대체로 긍정감성이 높게 평가되었고 긍정감성과 심리음향인자와의 상관성은 Loudness의 -0.37을 비롯하여 "-"상관성을, Unbiased annoyance와 심리음향인자들과의 상관성은 Loudness의 0.92를 비롯한 "+" 상관성을 각각 갖었으며 여자는 남자보다 긍/부정감성에 더욱 예민하게 반응하는 것으로 나타났다.

• Journal of the Korean Chemical Society
• /
• v.51 no.3
• /
• pp.265-269
• /
• 2007

A comparative study on crystal structures and UV-visible diffuse reflectance spectra for Nb-containing oxyfluorides was performed to probe the relationship between energy band gap and local structure. The oxyfluorides, RbSrNb2O6F, RbCaNb2O6F and RbNb2O5F are commonly composed of the corner-sharing NbO5F octahedra as structural building units. The average Nb-O(F)-Nb bond angles, which can be a measure of the structural distortion, are 158.6° for RbSrNb2O6F, 149.6° for RbCaNb2O6F and 139.5° for RbNb2O5F. As the bond angle decreases, the band gap increases: 3.48eV for RbSrNb2O6F, 3.75eV for RbCaNb2O6F and 4.03 eV for RbNb2O5F. This experimental result implies that the band gap can be controlled with a range of 0.6 eV through a variation of local structure for the Nb-containing oxyfluorides.