• 제목/요약/키워드: functional test

검색결과 3,257건 처리시간 0.031초

Testability of Current Testing for Open Faults Undetected by Functional Testing in TTL Combinational Circuits

  • Tsukimoto, Isao;Hashizume, Masaki;Mushiaki, Yukiko;Yotsuyanagi, Hiroyuki;Tamesada, Takeomi
    • 대한전자공학회:학술대회논문집
    • /
    • 대한전자공학회 2002년도 ITC-CSCC -3
    • /
    • pp.1972-1975
    • /
    • 2002
  • A new test approach based on a supply current test method is proposed for testing open faults in bipolar logic circuits. In the approach, only the open faults are detected by the supply current test method, which are difficult to be detected by functional test methods. The effectiveness of the approach is examined experimentally on open fault detection in TTL combinational circuits. The results shows that higher fault coverage can be established by applying a small number of test input vectors of the supply current test method after test vectors of functional test methods based on stuck-at models.

  • PDF

분산 시스템의 기능 및 비기능 검증을 위한 테스트 프레임워크 개발 (Development of a Test Framework for Functional and Non-functional Verification of Distributed Systems)

  • 윤상필;서용진;민법기;김현수
    • 인터넷정보학회논문지
    • /
    • 제15권5호
    • /
    • pp.107-121
    • /
    • 2014
  • 분산 시스템은 물리적으로 분산된 컴퓨터들이 네트워크에 의해 유기적으로 연결된 것을 의미한다. 유무선 인터넷의 보편적인 사용으로 인해 사용자는 언제 어디서나 분산 서비스의 이용이 가능하게 되었다. 분산 서비스의 폭발적인 증가는 서비스의 기능적 측면에서의 검증뿐만 아니라 서비스 품질과 관련된 비기능적 요소의 검증도 강하게 요구하고 있다. 분산 서비스를 검증하기 위해서는 분산 시스템에 맞는 테스트 환경을 구축해야 한다. 하지만 분산 시스템은 물리적으로 분산된 노드로 구성되기 때문에 테스트 환경을 구축함에 있어서 단일 시스템의 테스트 환경보다 많은 노력이 요구된다. 이 논문에서 우리는 분산 시스템의 기능 및 비기능 요소의 검증을 위한 테스트 프레임워크를 제안한다. 제안하는 테스트 프레임워크는 메시지 시퀀스 차트(Message Sequence Chart)를 기반으로 테스트 케이스를 자동 생성하며, 물리적으로 분산된 노드를 흉내 낼 수 있는 가상의 분산 노드로 구성된 테스트 드라이버를 포함한다. 테스트 수행 결과는 다양한 그래프와 GUI를 통해서 쉽게 확인할 수 있다. 이 논문에서 제안하는 테스트 프레임워크를 통해 분산 시스템 테스트에 드는 노력을 감소할 수 있고 시스템의 신뢰성을 향상 시킬 수 있을 것이다.

여성복의 기능성 향상을 위한 착의 평가에 관한 연구 -소매산 높이 변화에 따른 기능성 측정을 중심으로- (A Study on the Evaluation for the Improvement of the Functional Movement of Women′s Wear -with Concentration on the Measurement of Functional Movement according to the Change of Cap Height-)

  • 박선경
    • 복식문화연구
    • /
    • 제12권2호
    • /
    • pp.249-261
    • /
    • 2004
  • This research proves the ROM method (Range Of Motion), which has already been used in other countries, that measures the capacity of exercise and the adaptation of movement of functional garments for special purpose due to change of the height of basic sleeve sloper. Basically, the ultimate goal of the research is to improve the functional pattern design. Firstly, this research proves the proper application of ROM that is used for the evaluation of fitting test. Therefore, according to this research, the company is able to produce the sample that is appropriate to the various purpose for women garments and betters the evaluation of function of garments. Moreover, it suggests that the evaluation of fitting test satisfies the consumers who desire to try better garments and contributes to the competitions among the companies that bring more improvements to the fashion design.

  • PDF

Quad-functional Built-in Test Circuit for DRAM-frame-memory Embedded SOG-LCD

  • Takatori, Kenichi;Haga, Hiroshi;Nonaka, Yoshihiro;Asada, Hideki
    • 한국정보디스플레이학회:학술대회논문집
    • /
    • 한국정보디스플레이학회 2008년도 International Meeting on Information Display
    • /
    • pp.914-917
    • /
    • 2008
  • A quad-functional built-in test circuit has been developed for DRAM-frame-memory embedded SOG-LCDs. The quad function consists of memory test, display test, serial transfer test, and parallel transfer test which is the normal operation mode for our SOG-LCD. Results of memory and display tests are shown.

  • PDF

Efficient Path Delay Testing Using Scan Justification

  • Huh, Kyung-Hoi;Kang, Yong-Seok;Kang, Sung-Ho
    • ETRI Journal
    • /
    • 제25권3호
    • /
    • pp.187-194
    • /
    • 2003
  • Delay testing has become an area of focus in the field of digital circuits as the speed and density of circuits have greatly improved. This paper proposes a new scan flip-flop and test algorithm to overcome some of the problems in delay testing. In the proposed test algorithm, the second test pattern is generated by scan justification, and the first test pattern is processed by functional justification. In the conventional functional justification, it is hard to generate the proper second test pattern because it uses a combinational circuit for the pattern. The proposed scan justification has the advantage of easily generating the second test pattern by direct justification from the scan. To implement our scheme, we devised a new scan in which the slave latch is bypassed by an additional latch to allow the slave to hold its state while a new pattern is scanned in. Experimental results on ISCAS'89 benchmark circuits show that the number of testable paths can be increased by about 45 % over the conventional functional justification.

  • PDF

단변량 및 다변량 함수 데이터에 대한 분산분석의 활용 (Application of functional ANOVA and functional MANOVA)

  • 김미정
    • 응용통계연구
    • /
    • 제35권5호
    • /
    • pp.579-591
    • /
    • 2022
  • 함수 데이터는 다양한 분야에서 수집되고 있으며, 집단 간의 함수 데이터를 비교해야하는 경우가 종종 발생한다. 이럴 경우 점별 분산분석 방법을 이용하여 설명하기에는 무리가 있으며, 통합된 결과를 제시할 필요가 있다. 이에 대한 다양한 연구가 제안되었으며, 최근에 R 패키지 fdANOVA로 구현되었다. 이 논문에서 우선 분산분석 및 다변량 분산분석을 설명하고, 최근에 제안된 다양한 단변량 및 다변량 함수 데이터 분산분석을 설명하고자 한다. 또한 R 패키지 fdANOVA의 사용 방법을 설명하고, 이 패키지를 이용하여 서울과 부산 지역의 주별 기온을 단변량 함수 데이터 분산분석을 통해 비교하고, 손글씨 이미지를 다변량 함수 데이터로 변환하여 다변량 함수 데이터 분산분석을 이용하여 비교하고자 한다.

척수손상환자의 Functional Reach Test의 신뢰도 (The Inter- and Intra-rater Reliability of the Functional Reach Test in Subjects With Spinal Cord Injury)

  • 김영록;민원규
    • 한국전문물리치료학회지
    • /
    • 제6권3호
    • /
    • pp.51-58
    • /
    • 1999
  • In general, sitting balance is decreased in subjects with spinal cord injury. The purpose of this study was to evaluate the inter- and intra-rater reliability of the Functional Reach Test (FRT) which is used to measure sitting balance. The subjects of this study were 26 persons with spinal cord injury, and they were divided into three groups according to their injury level. Group I, II and III consisted of the following $C_5{\sim}C_8$ quadriplegics, $T_1{\sim}T_4$, and $T_9{\sim}T_12$ paraplegics, respectively. Subjects sat on a mat table that was set at an 80 degree inclination. During three sessions, the length subjects could reach in the FRT test was measured by three physical therapists, and compared to each other. The results showed that intraclass correlation coefficients (2,1) were above 0.97 and inter-rater difference was not statistically significant. The one-way ANOVA demonstrated that reach differed between groups with lower thoracic lesion and the other test groups. In conclusion, we think modified FRT is useful and reliable method to measure the sitting balance in subjects with spinal cord injury.

  • PDF

과제 지향적 기능 훈련이 뇌졸중 환자의 균형에 미치는 영향 (The Effects of Task-Oriented Functional Training on Standing Balance in Stroke Patients)

  • 김재욱;김수민;박래준
    • The Journal of Korean Physical Therapy
    • /
    • 제15권4호
    • /
    • pp.65-81
    • /
    • 2003
  • The purpose of this study was to investigate the balance of stroke patient appling Task-Oriented Functional training program. Sixteen subjects were recruited from KeiMyung university Dongsan Medical Center inpatient satisfying requirement for this study. They were divided into Task-Oriented Functional training group and Conventional therapy group. They were measured by Sensory organization test and Motor control test items using EquiTest Version 8.0 machine before and after the test. The result of this study were to follow: 1. In Sensory organization test, there were no significant differences in static eguibrium score in both groups(p<.05). 2. In Sensory organization test, there were significant differences in dynamic eguibrium score in both groups(p<.05). 3. In Motor control test, there were significant differences in both groups(p<.05). 4. In exercise group, there were no significant differences in static Sensory organization test(p<.05). 5. In exercise group, there were significant differences in dynamic Sensory organization test(p<.05). 6. In exercise group, there were significant differences in Motor control test(p<.05). 7. In control group, there were no significant differences in static Sensory organization test(p<.05). 8. In control group, there were no significant differences in dynamic Sensory organization test(p<.05). 9. In control group, there were no significant differences in Motor control test(p<.05).

  • PDF

뇌졸중 환자에 대한 기능적 보행평가, 버그 균형척도, 일어나 걸어가기 검사의 동시 타당도 (Concurrent Validity of the Functional Gait Assessment, Berg Balance Scale, and Timed Up and Go Test in Patients With Stroke)

  • 원종임;김기송
    • 한국전문물리치료학회지
    • /
    • 제18권2호
    • /
    • pp.43-51
    • /
    • 2011
  • Balance is a complex motor skill that depends on interactions between multiple sensorimotor processes and environmental and functional contexts. Many rehabilitation specialists believe that balance assessment under multitask conditions may be a more sensitive indicator of balance problems and falls than balance assessment in a single-task context. Functional Gait Assessment has many tasks that allow for testing under multitask conditions. The purpose of this study was to determine the concurrent validity between the Functional Gait Assessment (FGA), Berg Balance Scale (BBS), and Timed "Up & Go" Test (TUG) in patients with stroke. One hundred and five participants with at least 3 months post stroke and able to walk at least 6 m with or without a mono cane, participated in this study. Concurrent validity between the FGA, BBS, and TUG was assessed using Spearman rank order correlation. The FGA correlated with the BBS (r=.80, p<.01) and TUG (r=-.77, p<.01). The good and moderate correlation between the FGA, BBS, and TUG establishes the concurrent validity of the FGA in patients with stroke. These measures provide clinicians with valuable information about patients' functional balance capabilities.

만성 폐쇄성 폐질환 환자의 기능적 용량 설명모형 (An Explanatory Model on Functional Capacity in Patients with Chronic Obstructive Pulmonary Disease)

  • 방소연
    • 성인간호학회지
    • /
    • 제20권4호
    • /
    • pp.652-663
    • /
    • 2008
  • Purpose: This study was conducted to develop and test an explanatory model on functional capacity in patients with chronic obstructive pulmonary disease using path analysis. Methods: Data were collected from 149 chronic obstructive pulmonary disease patients using 6-minute walk test, measurement of oxygen saturation, pulmonary function test, and self-reported questionnaires from June to October, 2005. The collected data were analyzed using SPSS/WIN 12.0 program and AMOS/WIN 4.0 program. Results: The overall fitness indices of modified model were good($x^2$ = 14.324, p = .281 GFI = .981, RMSEA = .006, AGFI = .944, NFI = .927, NNFI = .999, CFI = .999, PNFI = .613, $x^2$/df = 1.194). Functional capacity was influenced directly by age(${\beta}$ = -.304, p = .000), dyspnea(${\beta}$ = -.278, p = .000), self-efficacy(${\beta}$ = .240, p = .000), social support(${\beta}$ = .175, p = .004), pulmonary function(${\beta}$ = .169, p = .008), and oxygen saturation(${\beta}$ = .099, p = .048). These variables explained 39.3% in functional capacity. Conclusion: The findings of this study suggest that comprehensive nursing interventions should focus on decreasing dyspnea and increasing self-efficacy, social support, and oxygen saturation. In this perspective, pulmonary rehabilitation would be an effective strategy for improving functional capacity in patients with chronic obstructive pulmonary disease.

  • PDF