• Proceedings of the Materials Research Society of Korea Conference
• /
• 2010.05a
• /
• pp.17.1-17.1
• /
• 2010

2000년대 들어 소재기술의 진보와 함께 혁신적인 성능개선이 이뤄지고 있는 유기박막 태양전지는 가장 신형의 3세대 태양전지로서, 유기 재료의 손쉬운 가공성과 다양성, 낮은 재료비, 그리고 프린팅, 코팅 공정과 같은 값싼 소자 제작공정으로 인해 차세대 저가 태양전지로서 큰 기대를 모으고 있다. 현재 유기박막 태양전지는 단위소자 기준으로 7%대의 광전변환 효율을 달성하고 있는데, 다양한 반도체성 고분자나 단분자 도너 물질에 특히 전자 수용성이 좋은 fullerene(C60)계 억셉터 물질을 채택함으로써 급격히 성능 개선이 이뤄지고 있다. 그러나 상용화를 위해서는 궁극적으로 대면적에서 10% 이상의 성능 수준이 요구되는 바, 유기재료의 낮은 전하 이동도와 짧은 수명을 극복하고 성능을 극대화하기 위해서는 고성능 신규소재의 개발이 필수이다. 태양광 스펙트럼의 장파장 까지 빛흡수가 가능하면서도 광흡수계수가 높은 저밴드갭 도너 물질, 전하 이동도가 획기적으로 개선되고 광 안정성도 높은 신규 소재 개발이 일차적으로 요구되며, 박막 특성 개선과 소자구조의 최적화 등에서도 보다 광범위한 연구개발이 요구되고 있다. 특히 저가의 용액공정에 의한 소자 제작시 박막의 나노-모폴로지 제어는 소자의 성능에 지대한 영향을 미치므로 공정별 한계와 최적조건을 구축하는 것도 매우 긴요하다. 본 발표에서는 당 연구팀을 포함한 국내외 연구그룹들의 최근 유기박막 태양전지 신소재 개발 및 용액공정 기술 현황에 대하여 간략히 살펴보고자 한다.

• Transactions on Electrical and Electronic Materials
• /
• v.6 no.3
• /
• pp.124-127
• /
• 2005

It has been a long time since organic solar cells were expected as a low-cost energy-conversion device. Although practical use of them has not been achieved, technological progress continues. Morphology of the materials, organic/inorganic interface, metal cathodes, molecular packing and structural properties of the donor and acceptor layers are essential for photovoltaic response. We have fabricated solar cell devices based on zinc-phthalocyanine(ZnPc) as donor(D) and fullerene$(C_60)$ as electron acceptor(A) with doped charge transport layers, and BCP and $Alq_3$ as an exciton blocking layer(EBL). We have measured the photovoltaic characteristics of the solar cell devices using the Xe lamp as a light source. We were use of $Alq_3$ layer leads to external power conversion efficiency was $2.65\%$ at illumination intensity $100\;mW/cm^2$. Also we confirmed the optimum thickness ratio of the DA hetero-junction is about 1:2.

• Macromolecular Research
• /
• v.14 no.5
• /
• pp.524-529
• /
• 2006

New, thermally robust, arylenevinylene conjugated polymers, including poly(9,9-dioctylfluorenyl-2,7-vinylene) [poly(FV)] and poly[2-(3'-dimethyldodecylsilylphenyl)-1,4-phenylenevinylene] [poly(m-SiPhPV)], were synthesized and used for the fabrication of efficient photovoltaic cells. Bulk heterojunction photovoltaic cells fabricated by blending one of the polymers, [poly(FV)], [poly(m-SiPhPV)], and poly(FV-co-m-SiPhPV), with the fullerene derivative [6,6]-phenyl-$C_{61}$-butyric acid methyl ester (PCBM) were found to have a power conversion efficiency of up to 0.038%..

• Bulletin of the Korean Chemical Society
• /
• v.31 no.11
• /
• pp.3195-3200
• /
• 2010

We have performed molecular dynamics simulations of atomistic models of $C_{60}$ molecules and DMPC bilayer membranes to study the static and dynamic effects of carbon nanoparticles on biological membranes. All four $C_{60}$-membrane systems were investigated representing dilute and concentrated solutions of $C_{60}$ residing either inside or outside the membrane. The concentrated $C_{60}$ molecules in water phase start forming an aggregated cluster. Due to its heavy mass, the cluster tends to adhere on the surface of the bilayer membrane, hindering both translational and rotational diffusion of individual $C_{60}$. On the other hand, once $C_{60}$ molecules accumulate inside the membrane, they are well dispersed in the central region of the bilayer membrane. Because of the homogeneous dispersion of $C_{60}$ inside the membrane, each leaflet is pushed away from the center, making the bilayer membrane thicker. This thickening of the membrane provides more room for both translational and rotational motions of $C_{60}$ inside the membrane compared to that in the water region. As a result, the dynamics of $C_{60}$ inside the membrane becomes faster with increasing its concentration.

• Elastomers and Composites
• /
• v.51 no.4
• /
• pp.286-300
• /
• 2016

$MoS_2$ precursors were synthesized by reacting thioacetamide ($C_2H_5NS$) with sodium molybdate dihydrate ($Na_2MoO_4{\cdot}2H_2O$) in aqueous HCl solution. $MoS_2$ nanoparticles were prepared from dried $MoS_2$ precursors by calcination in an electric furnace at $700^{\circ}C$ for 2 h under an inert argon atmosphere. $MoS_2-C_{60}$ nanocomposites were obtained by heating $MoS_2$ nanoparticles and fullerene ($C_{60}$) together in an electric furnace at $700^{\circ}C$ for 2 h. Their morphological and the structural properties were characterized by powder X-ray diffraction and scanning electron microscopy. The $MoS_2$ nanoparticles and $MoS_2-C_{60}$ nanocomposites were used as catalysts in the reductions of 2-, 3-, and 4-nitrophenol in the presence of sodium borohydride. The photocatalytic activities of the $MoS_2$ nanoparticles and $MoS_2-C_{60}$ nanocomposites were evaluated in the degradation of organic dyes (brilliant green, methylene blue, methyl orange, and rhodamine B) under ultraviolet light (254 nm).

• Transactions on Electrical and Electronic Materials
• /
• v.5 no.6
• /
• pp.227-232
• /
• 2004

We investigated a nonvolatile nanomemory element based on boron nitride nanopeapods using molecular dynamics simulations. The studied system was composed of two boron-nitride nanotubes filled Cu electrodes and fully ionized endo-fullerenes. The two boron-nitride nanotubes were placed face to face and the endo-fullerenes came and went between the two boron-nitride nanotubes under alternatively applied force fields. Since the endo-fullerenes encapsulated in the boron-nitride nanotubes hardly escape from the boron-nitride nanotubes, the studied system can be considered to be a nonvolatile memory device. The minimum potential energies of the memory element were found near the fullerenes attached copper electrodes and the activation energy barrier was $3{\cdot}579 eV$. Several switching processes were investigated for external force fields using molecular dynamics simulations. The bit flips were achieved from the external force field of above $3.579 eV/{\AA}$.

• Korean Chemical Engineering Research
• /
• v.46 no.1
• /
• pp.88-93
• /
• 2008

The bulk-heterojunction polymer solar cell based on regioregular P3HT (poly(3-hexylthiophene)) and PCBM (methanofullerene [6,6]-phenyl $C_{61}$-butyric acid methyl ester) was fabricated. Annealing effects on the crystal structure of polymer-fullerene blends as well as the UV-VIS electronic absorption spectroscopy were investigated. The correlation between the crystal organization of bulk-heterojunction film and the power conversion efficiency of solar cell was studied. Resultantly, the polymer solar cell annealed on $150^{\circ}C$ for 30 min, showed both the enhanced molecular interactions and the optimized crystal structure and displayed the power conversion efficiency of 3.2 %.

• Carbon letters
• /
• v.27
• /
• pp.35-41
• /
• 2018

Surfactant-wrapped separation methods of metallic and semiconducting single-walled carbon nanotubes (SWCNTs) can result in large changes in intrinsic physical and chemical properties due to electronic interactions between a nanotube and a surfactant. Our approach to synthesize SWCNTs with an electronic feature relied on utilizing carbon nanorings, [n] cycloparaphenylenes ([n]CPPs), which are the fundamental unit of armchair type SWCNTs (a-SWCNTs) that possess a metallic feature without any surfactants. To obtain long tubular structures from [n]CPPs, the host-guest complexes formed with well-aligned [n]CPP hosts and various fullerene guests on a silicon substrate were pyrolyzed under an ethanol gas flow at a high temperature with focused-ultraviolet laser irradiation. The pyrolyzed [n]CPPs were observed to transform from nanorings to tubular structures with 1.5-1.7 nm diameters corresponding to the employed diameter of [n]CPPs. Our approach suggests that [n]CPPs are useful for structure-controlled synthesis of SWCNTs.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2004.07a
• /
• pp.181-184
• /
• 2004

Organic semiconductors have attracted considerable attention due to their interesting physical properties followed by various technological applications in the area of electronics and opto-electronics. It has been a long time since organic solar cells were expected as a low-cost high-energy conversion device. Although practical use of them has not been achieved, technological progress continues. Morphology of the materials, organic/inorganic interface, metal cathodes, molecular packing and structural properties of the donor and acceptor layers are essential for photovoltaic response. We have fabricated solar-cell devices based on copper-phthalocyanine(CuPc) as a donor(D) and fullerene($C_{60}$) as an electron acceptor(A) with doped charge transport layers, and BCP as an exciton blocking layer(EBL). We have measured photovoltaic characteristics of the solar-cell devices using the xenon lamp as a light source.

• Journal of the Semiconductor & Display Technology
• /
• v.8 no.3
• /
• pp.1-5
• /
• 2009

In this study, we have shown the power conversion efficiency of organic thin film photovoltaic devices utilizing a conjugated polymer/fullerene bulk-hetero junction structure. We use MDMO-PPV(Poly[2-methoxy-5-(3,7-dimethyloctyloxy -1,4-phenylenevinylene) as an electron donor, PCBM([6,6]-Phenyl C61 butyric acid methyl ester) as an electron accepter, and PEDOT:PSS used as a HTL(Hole Transport Layer). We have fabricated OPV(Organic Photovoltaic) devices as a function of the MDMO-PPV/PCBM concentration from 1:1 to 1:5. The electrical characteristics of the fabricated devices were investigated by means of I-V, P-V, F·F(Fill Factor) and PCE(power conversion efficiency). The power conversion efficiency was gradually increased until 1:4 ratio, also the highest efficiency of 0.4996% was obtained at the ratio.