• Journal of the Korean Institute of Telematics and Electronics
• /
• v.8 no.3
• /
• pp.1-14
• /
• 1971

A relay servo, one of the nonlinear sytsems, is inherently compact compared to a linear system for an equivalent control problem. The power element or actuator is not adjusted proportionally in accordance with an error signals but rather is switched abruptly between several discrete conditions. Usually switched conditions are off, full, forward or full reverse. The relay system is a particularly simple and compact one, but probably more effort has been expended on its analysis and design than on all other systems together. Early studies in the art were made by Goldfarb, austin, Oppelt and Kochenburger on the describing function method, which can be used as an approximate check on the stability of the system. The describing function method is based on the assumption that any periodic wave could be approximated as a fundamental one in wide ranges of practical applications. A relay servo system usually operates on a limit cycle condition as the loop gain increases. The stability analysis compensation or any improvement effort based on the describing function method sometimes may present considerable discrepancies on physically realized practical systems. An approach to exact periodic solutions of a relay servo system is much important for the analysis, design and system improvement. This paper dells with periodic solutions of a relay servo system on the basis of describing function and generalized chopper wave form which is composed of infinite number of harmonic series. Various ways of graphical representation were attempted to get periodic solutions, some of which have shown its validity in rapid approach to exact solutions and also in judgement of system behavior.

• Journal of Korean Society for Geospatial Information Science
• /
• v.13 no.1 s.31
• /
• pp.11-17
• /
• 2005

A lot of small-scale reservoirs that is extravagant in whole country are controlled state or real condition that correct data about the practice contents is not equipped all up to now. In this study, YungNam districts that region Gyeong-Ju city reservoir is distributed much of when flow speedily choose 23 peace among 73 small scale reservoir and experimented. Acquired data every 5 seconds, and user E/S and user value TS for orthocenter to 1 second interval and executes present condition measurement using RTK-GPS. Could was wave and state that reservoir of 15 places (about 65%) gives protective care that do 3D modelling with acquired data, and now correct contents about reservoir state past through comparative analysis with data. Also, area of full water and wave that analyze effective storage and area of full water of 23 places reservoir could know that 20.63%, effective storage decreased as 3.34%. I wish to contribute about analysis about present reservoir state through this and method the adminstration direction.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.11 no.6
• /
• pp.976-983
• /
• 2000

In this paper, Bridcage type RF coils used widely as RF coils for MRI and its applicable type, spiral type RF coil are analyzed and designed using FDTD method. In low tesla (IT, 1.5T) MRI system, several tools have been used for the analysis and design of the RF coils for MRI. This includes, so-called, LC equivalent circuit method for predicting the resonance frequency of the coil and the Biot-Savart law to determine the field distribution within the coil. Both of the circuit analysis and Biot-Savart law are low frequency techniques. Therefore, at high frequency applications, the circuit model approximation breaks down because the coil geometry is a significant fraction of the wavelength. In this paper, we analyzed and designed RF coils for 3T MRI using FDTD method. This method is a full wave analysis and very accurate at low and high frequencies. Also, this RF coils are actually fabricated and FDTD models of RF coils for MRI are proven.

• Journal of the Korean Geophysical Society
• /
• v.9 no.2
• /
• pp.113-120
• /
• 2006

A lot of small-scale reservoirs that is extravagant in whole country are controlled state or real conditionthat correct data about the practice contents is not equipped all up to now. In this study, YungNam districts that region Gyeong-Ju city reservoir is distributed much of when flow speedily choose 23 peace among 73 small scale reservoir and experimented. Acquired data every 5 seconds, and user E/S and user value TS for orthocenter to 1 second interval and executes present ondition measurement using RTK-GPS. Could was wave and state that reservoir of 15 places (about 65%) gives protective care that do 3D modelling with acquired data, and now correct contents about reservoir state past through comparative analysis with data. Also, area of full water and wave that analyze effective storage and area of full water of 23 places reservoir could know that 20.63%, effective storage decreased as 3.34%. I wish to contribute about analysis about present reservoir state through this and method the adminstration direction.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.32 no.4
• /
• pp.257-263
• /
• 2019

Multilayered structures include lamination by relatively thick plies and thin interlayers. For efficient peridynamic analysis of dynamic fracturing multilayered structures, the interlayer is modeled using ghost peridynamic particles while the ply is formulated via real peridynamics. With the nonlocal ghost interlayer, one may keep the discretization resolution low for the ply. In this study, the characteristics of dynamic wave propagation through the nonlocal ghost interlayer in peridynamic analysis are investigated. It is observed that the interlayer not only binds adjacent plies, but also significantly influences energy transfer between plies, and thereby their deformation and motion. In addition, near a surface or boundary, peridynamic particles do not have a full nonlocal neighborhoods. This causes the effective material properties near the surface to be different from those in the bulk. Surface correction based on neighborhood volumes is employed. The impact of surface correction on wave propagation in multilayered structures is investigated.

• Journal of the Society of Naval Architects of Korea
• /
• v.52 no.3
• /
• pp.198-205
• /
• 2015

In this study, numerical studies using a Computational Fluid Dynamics(CFD) method were carried out to estimate the green water load acting on the breakwater plate of bow deck of container carrier, KCS. For the green load water load analysis, a full load condition was considered. The relative motions at bow deck were calculated from the seakeepig analysis. Statistical analysis were carried out to estimate the long term response of the relative motions with the North Atlantic wave scatter diagram. The equivalent design wave was determined from the RAO of the relative motions at bow and the long term responses. CFD geometry modeling with three different locations and simulations for the green water loads were carried out in the equivalent design waves. A commercial CFD program, STAR-CCM+ Ver. 8.04, was used and the green water pressures on the breakwater plate were calculated successfully. The CFD analysis for green water loads can be used as a useful design tool for the evaluation of the breakwater plate of the container vessel.

• Proceedings of the IEEK Conference
• /
• 1998.10a
• /
• pp.1053-1056
• /
• 1998

Package strutures for RF circuit design are characterized and their equivalent circuitsare developed. The circuit parameters are extracted by using the commercial 3-dimensional field solver. The circuit models are verified by using the full-wave analysis in the RF region. It is demonstarted with the developed circuit models that the packages have substantial effects on the RF circuit performances.

• Proceedings of the IEEK Conference
• /
• 2001.06b
• /
• pp.133-136
• /
• 2001

A new package design method to reduce resonance effect due to an IC package is represented. Frequency-variant circuit model of the power/ground plane was developed to accurately reflect the resonance. The circuit model is benchmarked with a full wave simulation, thereby verifying its accuracy. Then it was shown that the proposed technique can efficiently reduce the resonance due to the IC package.

• Journal of Ocean Engineering and Technology
• /
• v.18 no.3
• /
• pp.40-43
• /
• 2004

A rational method is presented for estimating the power increase of a ship at sea. A probabilistic approach is applied to determine the weather condition at sea, A comparison is made between some full-scale data and the result of Swift's method. A comparison is also made to find differences among the results of eight kind methods for the wind added resistance of a VLCC in head wind. The mean difference between the results is 7％, in general, for a given relative wind speed.

• Journal of Power System Engineering
• /
• v.14 no.1
• /
• pp.53-58
• /
• 2010

A three-dimensional source distribution method is presented for the prediction of motions and vertical bending moments of ships travelling with forward speed in regular waves. Comparisons between theoretical and experimental results are shown for the motion responses and vertical bending moment of the S175 container ship model by Watanabe et al. The model ship was made of synthetic resins so as to simulate bending rigidity of a full scale ship. Numerical results are compared with experimental and numerical ones obtained in the literature. The results of comparison confirmed the validity of the proposed approach.