• 한국화재소방학회논문지
• /
• 제32권6호
• /
• pp.40-45
• /
• 2018

전방위 감시카메라에는 어안렌즈를 이용하여 광대역감시가 가능하도록 물체감지알고리즘으로 물체를 단위별 레벨링한 다음 전방위 감시카메라와 추적(PTZ)카메라로 구성된 시스템으로 연동하여 현장실험한 것이다. 전방위 감시카메라가 움직이는 물체를 정확히 감지하며 사각표시를 하였고 추적카메라와 유기적으로 연동하며 확대 추적하였다. 감지카메라와 화염감지 및 온도에 대한 현장실험에서는 오토스캔 중 화염이 감지되면 멈추며, 해당 화점부분을 화면의 중심부분으로 이동시켜 온도가 표출되었다. 또한 화염이격거리별 검지에 필요한 발열량의 인정기준인 1 km 2,340 kcal를 초과한 1.5 km에서도 가능하였다. 거리에 따른 화염감지성능시험에서는 거리 1 km일 때 폭 56 cm ${\times}$ 높이 90 cm를 초과한 1.5 km에서도 가능하여 산불화재에도 적응성이 충분하였다. 향후 석유 가스비축시설 및 저유소에 설치하면 자체는 물론 주위 화재예방 및 침입감시 등의 안전에 매우 유용할 것으로 기대된다.

• 한국초전도저온공학회지:초전도와저온공학
• /
• 제20권2호
• /
• pp.15-22
• /
• 2018

The present article briefly overviews the plan for a new project on joint technology for HTS wires/cables and describes the development plan for the world's highest field NMR magnet, which is a major development item in the project. For full-fledged social implementation of superconducting devices, high temperature superconducting (HTS) wire is a key technology since they can be cooled by liquid nitrogen and they can generate a super-high magnetic field of >>24 T at liquid helium temperatures. However, one of the major drawbacks of the HTS wires is their availability only in short lengths of a single piece of wire. This necessitates a number of joints being installed in superconducting devices, resulting in a difficult manufacturing process and a large joint resistance. In Japan, a large-scale project has commenced, including two technical demonstration items: (i) Development of superconducting joints between HTS wires, which are used in the world's highest field 1.3 GHz (30.5 T) NMR magnet in persistent current mode; the joints performance is evaluated based on NMR spectra for proteins. (ii) Development of ultra-low resistive joints between DC superconducting feeder cables for railway systems. The project starts a new initiative of next generation super-high field NMR development as well as that of realization of better superconducting power cables.

• 생물환경조절학회지
• /
• 제31권4호
• /
• pp.438-443
• /
• 2022

본 연구에서는 실대형 실험과 구조해석을 통해서 현장에서 사용되는 가새 시스템을 적용한 강관 골조 플라스틱 연동온실의 횡하중 가력시험을 수행하고 성능을 분석하였다. 횡강성과 응력을 분석하기 위해 실험체에 변위와 변형률계를 각각 9개소 및 16개소 설치하였으며 가새의 설치 유무에 따른 성능을 비교하기 위해 구조해석을 수행하였다. 실대형 실험과 가새의 설치 유무에 따른 구조해석 결과 비교에서 구조물의 횡강성이 많은 차이를 보였다. 실험체의 측고 부근에서 측정한 횡강성은 가새 시스템을 설치함으로 강성을 최대 44%까지 증가시켰다. 현장에서 사용하는 가새의 접합부가 충분한 강성을 확보하지 못함으로써 외력을 전체 구조물에 적절히 전달하지 못하여 횡강성이 구조해석 결과보다 많이 저하되는 현상이 나타났다. 따라서 온실 설계 시 구조성능의 신뢰성을 높이기 위해서 가새 시스템의 연결방법, 설치위치, 부재의 최대길이 등 온실의 접합부에 대한 명확한 시공방법과 설계기준이 정립되어 온실 설계가 이루어져야 할 것으로 판단된다.

• 대한조선학회논문집
• /
• 제51권6호
• /
• pp.489-494
• /
• 2014

Estimation of correct ice load under various operating conditions is important during the design and the operation stages of an icebreaker. Normal operating conditions are expected from the official field ice trials and also from general ice transit action. In this paper ice load for the Korean icebreaking research vessel, ARAON, under normal operating condition, is discussed. Published ice load data from full-scale sea trials of six icebreakers were analysed to derive an empirical ice load prediction formula. The IBRV ARAON had sea ice trials during 2010 and 2012 summer season. Strain gauge signal were recorded during her icebreaking voyage and the measured strain data were converted to the equivalent hull stress values. The effect of ARAON's speed in ice and the hull stresses are investigated. By comparing the empirical formula and ice load calculation based von measured data, it is recommended to use the empirical ice load estimation formula for the initial design stage.

• 대한조선학회논문집
• /
• 제39권1호
• /
• pp.1-7
• /
• 2002

기존의 소음계측 장치가 유동장 및 구조적 진동의 영향을 받을 수 있어 개선이 요구되었다. 새로이 설계된 2개의 Hydrophone Box에 수중청음기를 설치하여 성능을 검증하였으며, KRISO 캐비테이션 터널과 외국의 다른 캐비테이션 터널들과 배경소음 특성을 비교하였다. 현재의 실험결과로 미루어 프로펠러 캐비테이션 소음의 실선성능 예측이 가능하다고 사료되며, 저주파에서의 특성이 개선되었음을 알 수 있었다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 하계학술대회 논문집 Vol.4 No.1
• /
• pp.481-484
• /
• 2003

Recently polymer insulators are being used for outdoor high voltage applications. Polymer insulators have significant advantages over porcelain and glass insulators. With the gradual improvement of their design and material, their reliability has also increased. It is however difficult to establish how they will perform after several years of service. Aging of the insulator weathershed may lead to damages such as excessive chalking and crazing, erosion and tracking which affect the insulator performance. In service insulator are subjected to aging stresses such as humidity, pollution and electrical field which act singly or in combination. There have been numerous accelerated laboratory tests developed with the intention of evaluating suitability of polymeric materials. Some of these are strictly material tests, where as, others evaluate full scale devices. Service experience plays a key role in the utility selection of polymer insulator, but is time consuming, and may not always be available. Hence there is a need for a meaningful and reliable accelerated aging test for polymer insulator. This paper describes multi-stress aging test for reliability of polymer insulator This paper presents the rule of multi-stress aging test and test chamber for polymer insulator in korea electrotechnology research institute.

• 한국도로학회논문집
• /
• 제20권4호
• /
• pp.27-34
• /
• 2018

PURPOSES : The objective of this study is to evaluate the physical properties of recycled asphalt mixtures reinforced with glass fiber. METHODS : Firstly, mixing design was conducted on recycled asphalt mixture for use of 50% recycled aggregate. Various laboratory tests were performed on four types of recycled asphalt mixtures with different glass fiber content to evaluate the physical properties. The laboratory tests include indirect tensile strength test, dynamic modulus test, Hamburg wheel tracking test and tensile-strength ratio to evaluate cracks, rutting and moisture resistance of mixtures. RESULTS : The indirect tensile strength of fiber reinforced glass increased about 139.4%. As a result of comparing the master curves obtained by the dynamic modulus test, the elasticity was low in the low temperature region and high in the high temperature region when the glass fiber was reinforced. The glass fiber contents of PEGS 0.3%, Micro PPGF 0.1% and Macro PPGF 0.3% showed the highest moisture resistance and rutting resistance. CONCLUSIONS : The test results show that use of glass fiber reinforcement can increase the resistance to cracking, rutting, and moisture damage of asphalt mixtures. It is also necessary to validate the long-term performance of recycled asphalt mixtures with glass fiber using full scale pavement testing and field trial construction.

• 대한인간공학회지
• /
• 제16권1호
• /
• pp.107-117
• /
• 1997

It is necessary to evaluate HMI inaspects of human factors in the design stage of MMIS(man machine interface system) and feedback the result of evaluation because operators performance is mainly influenced by the HMI. Therefore, the MMIS design should be reflected the operators psychological, behavioral and physiological characteristics in the interaction with human machine interface(HMI) in order to improve the safety and availability of the MMIS of a nuclear power plant(NPP) by reduction of human error. The development of human factors experimental evaluation techniques and integrated test facility(ITF) for the human factors evaluation become an important research field to resolve hi,am factors issues on the design of an advanced control room(ACR). We developed am ITF, which is aimed to experiment with the design of the ACR and the human machine interaction as it relates to the control of NPP. This paper presents the development of an ITF that consists of three rooms such as main test room(MTR), supporting test room(STR) and experiment control room(ECR). And, the ITF has a various facilities such as a human machine simulator(HMS), experimental measurement systems and data analysis and experiment evaluation supporting system(DAEXESS). The HMS consists of full-scope simulation model of Korean standard NPP and advanced HMI based on visual display nits (VDUS) such as touch color CRT, large scale display panel(LSDP), flat panel display unit and so on.

• 한국지반신소재학회논문집
• /
• 제2권3호
• /
• pp.3-9
• /
• 2003

본 연구에서는 Jewell의 설계도표에 의해 설계된 보강사면의 시험시공을 통한 현장계측을 실시하여 현장 성토체의 다짐특성, 사면의 변형특성, 침하특성 등을 분석함으로써 지오그리드를 이용한 보강 사면의 적용성과 전체적인 안정성을 평가를 수행하였다. 안정성 평가 결과, Jewell의 설계도표에 의해 설계된 보강사면은 전체적으로 안정한 것으로 평가되었으며, 식생매트 포설에 따른 식생의 활착은 현재의 경과 시간만을 고려하면 외관상 안정된 식생 발아 상태를 보이나, 식생의 발아가 경사면에 비해 시공 포설 경계층에 집중되어 이에 대한 보완이 요구된다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2004년도 하계학술대회 논문집 Vol.5 No.1
• /
• pp.469-472
• /
• 2004

There have been numerous accelerated aging laboratory tests for evaluating suitability of polymeric materials and devices. Aging test for materials and its full scale device has been conducted, but poor correlation of aging test such as service experience were observed. Service experience plays a key role in the utility section of composite insulators. A meaningful and reliable accelerated aging test is needed for evaluating composite insulator. During the service these insulators are subjected to aging stress such as humidity, pollution, and electrical field, and erosion and tracking of the weathershed occurs. This paper presents the criteria of reliability evaluation and evaluation facilities for 22.9 kV suspension composite insulator. We adopt the criteria of reliability evaluation consist of two test methods. One is CEA tracking wheel test for examining the tracking and erosion performance of composite insulator. The other is multi-stress aging test for examining effects of environmental factors such as UV, temperature, humidity, etc on composite insulator.