• Wind and Structures
• /
• 제5권2_3_4호
• /
• pp.177-192
• /
• 2002

Computation solutions for the flow around a cube, which were generated as part of the Computational Wind Engineering 2000 Conference Competition, are compared with full-scale measurements. The three solutions shown all use the RANS approach to predict mean flow fields. The major differences appear to be related to the use of the standard $k-{\varepsilon}$, the MMK $k-{\varepsilon}$ and the RNG $k-{\varepsilon}$ turbulence models. The inlet conditions chosen by the three modellers illustrate one of the dilemmas faced in computational wind engineering. While all modeller matched the inlet velocity profile to the full-scale profile, only one of the modellers chose to match the full-scale turbulence data. This approach led to a boundary layer that was not in equilibrium. The approach taken by the other modeller was to specify lower inlet turbulent kinetic energy level, which are more consistent with the turbulence models chosen and lead to a homogeneous boundary layer. For the $0^{\circ}$ case, wind normal to one face of the cube, it is shown that the RNG solution is closest to the full-scale data. This result appears to be associated with the RNG solution showing the correct flow separation and reattachment on the roof. The other solutions show either excessive separation (MMK) or no separation at all (K-E). For the $45^{\circ}$ case the three solutions are fairly similar. None of them correctly predicting the high suctions along the windward edges of the roof. In general the velocity components are more accurately predicted than the pressures. However in all cases the turbulence levels are poorly matched, with all of the solutions failing to match the high turbulence levels measured around the edges of separated flows. Although all of the computational solutions have deficiencies, the variability of results is shown to be similar to that which has been obtained with a similar comparative wind tunnel study. This suggests that the computational solutions are only slightly less reliable than the wind tunnel.

• 화약ㆍ발파
• /
• 제31권1호
• /
• pp.76-86
• /
• 2013

전자뇌관을 사용하여 근접 보안물건에 대한 터널발파 진동제어를 위해서는 근거리 발파진동 특성에 대한 이해가 필요하다. 본 논문에서는 터널발파 진동의 결정에 있어서, 심발부와 확대부의 영향을 분석하였다. 분석을 위한 계측자료는 "원주~강릉 복선전철 제${\bigcirc}{\bigcirc}$공구 노반건설공사" ${\bigcirc}{\bigcirc}{\bigcirc}$ 터널 현장의 기존 도로 하부통과 구간에서 획득하였다. 이에, 0.01%의 높은 시차 정밀도를 가진 터널용 전자발파시스템을 활용하여, 최대 지발당 장약량을 정밀하게 유지함으로써 뇌관 오차에 의한 진동 증폭현상을 제거하고, 진동제어에 유리한 심빼기 발파방법으로 번 컷(Burn-Cut)을 채택하였다. 그 결과, 심발부의 진동수준이 가장 높다는 일반적인 발파 상식과 달리 확대부의 진동수준이 상대적으로 더욱 높은 것으로 나타났다. 결과적으로, 근접 거리의 터널 발파진동은 전자뇌관을 심발부에 적용함으로서 저감시킬 수 있으며, 전체 영역에 전자뇌관을 사용할 경우 더욱 효과적으로 발파진동을 감소시킬 수 있을 것으로 판단된다.

• Wind and Structures
• /
• 제31권5호
• /
• pp.431-443
• /
• 2020

The modern tall buildings are often constructed as an unconventional plan and as twin buildings. Wind load on the tall building is significantly influenced by the presence of another building in the near vicinity. So, it is imperative to study wind forces on an unconventional plan shaped tall building. Mean wind pressure coefficients of a square and 'H' plan shape tall buildings are investigated using wind tunnel experiments. The experiments were carried out for various wind directions from 00 to 900 at an interval of 300 and various locations of the identical interfering building. The experimental results are presented at the windward face from the viewpoint of effects on cladding design. To quantify the interference effects, interference factors (I.F) are calculated. Mean pressure coefficients of both models are compared for isolated and interference conditions. The results show that pressure reduces with an increase in wind angle till 600 wind direction. The interfering building at full blockage interference condition generates more suction than the other two conditions. The interference factor for both models is less than unity. H-plan building model is subjected to a higher pressure than the square model.

• 화약ㆍ발파
• /
• 제13권1호
• /
• pp.20-31
• /
• 1995

Many methods and techniques to reduce ground vibrations are well known. Some of them are to adopt electric milisecond detonators with a sequential blasting machine or an initiating system with an adequate number of delay intervals. The types of electric detonators munufactured in Korea include instantaneous, decisecond and milisecond delays byt numbers of delay intervals are only limite from No.1 to No.20 respectively. It is not sufficient to control accurately milisecond time with these detonators in tunnel excavation. Sequential fire time refers to adding an external time delay to a detonators norminal firing time to obtain sequential initiation and it is determined by sequential timer setting. To reduce the vibration level, sequential blasting machine with decisecond detonatore was adopted. A total of 134 blasting was recorded at various sites. Blast-to-structure distances ranged from 20.3 to 42.0 meter, where charge weight varied from 0.25 to 0.75 kg per delay. The results can be summarized as follow : 1. The effects of sequential blasting machine on the vibration level are discussed. The vibration level by S.B.M. are decreased approximately 14.38~18.05 to compare to level of conventional blasting and cycle time per round can be saved. 2. The empirical equations of particle velocity were obtained in S,B.M. and conventional blastin. $V=K(D/W^{1/3})-n$. where the values for n and k are estimated to be 1.665 to 1.710 and 93.59 to 137 respectively. 3. The growth of cracks due to vibrations are found but the level fall to within allowable value.

• 국제초고층학회논문집
• /
• 제11권4호
• /
• pp.265-276
• /
• 2022

Double-Skin Facades (DSF) on tall buildings are becoming increasingly common in urban environments due to their ability to provide architectural merit, passive design, acoustic control and even improved structural efficiency. This study aims to understand the effects of porous DSF on the aerodynamic characteristics of tall buildings using wind tunnel tests. High Frequency Force Balance and pressure tests were performed on the CAARC standard tall building model with a variable porous DSF on the windward face. The introduction of a porous DSF did not adversely affect the overall mean forces and moments experienced by the building, with few differences compared to the standard tall building model. There was also minimal variation between the results for the three porosities tested: 50%, 65% and 80%. The presence of a full-height porous DSF was shown to effectively reduce the mean and fluctuating wind pressure on the side face of the building by about 10%, and a porous DSF over the lower half height of the building was almost as effective. This indicates that the porous DSF could be used to reduce the design load on cladding and fixtures on the side faces of tall buildings, where most damage to facades typically occurs.

• 터널과지하공간
• /
• 제3권1호
• /
• pp.54-62
• /
• 1993

In order to evaluate the necessity for the support during the excavation of the transport drift and use the data for design applications, laboratory testings of mechanical properties of rock samples and engineering rock mass classifications on this study site were performed. The values of RMR and Q-system are 68 and 11.8, respectively. Since these results were evaluated as good, this rock mass were determined to be unsupported. Full face excavation method was determined to be suitable for excavating this drift. In case of excavation, smooth blasting techniques must be carried out at the wall rock and the crown. However, considering the blast vibration etc. that have an effect on the surrounding rock mass, approximately less than 9kg of explosive charges per blast should be maintained.

• 터널과지하공간
• /
• 제17권3호
• /
• pp.225-233
• /
• 2007

노르웨이는 계곡이나 피요르드와 같은 굴곡이 심한 지형 때문에 터널이 많이 건설되었으며, 그 가운데 지난 30년 동안 59개의 터널이 전단면 기계굴착으로 완성되었다. 이러한 기계굴착 경험을 통하여 예측기법이 개발되고 발전되었으며 마침내 국립공과대학인 NTNU에서 예측법이 체계화되었다. 본 보고는 TBM 굴착자료가 알려진 14개의 노르웨이 터널과 4개의 국내의 터널에서 순굴착속도와 굴진속도를 분석하여, 이들의 발전경향을 연구한 것이다. 이 기간동안 노르웨이에서는 디스크 커터의 직경을 증대시키고 배열을 최적화하여 순굴착속도와 굴진속도를 두배 정도로 증진시켰다. 국내에서도 1980년부터 1990대까지 15년 동안 IBM의 굴진속도는 노르웨이에 비하여 작은 크기이지만 뚜렷이 증가하는 경향을 보였다. 이러한 작은 속도는 암반의 특성에도 기인하지만 17 인치보다 작은 직경의 디스크 커터를 사용한데 크게 기인된 것으로 판단된다. 향후 국내의 전단면 기계굴착에서 장비와 기술의 개선을 이루고, 특히 17 또는 19 인치의 디스크 커터를 사용한다면 순굴착속도와 굴진속도를 향상시킬 수 있을 것으로 예측된다.

• 터널과지하공간
• /
• 제11권1호
• /
• pp.30-35
• /
• 2001

본 연구에서는 전단면굴착에 가까운 작업 사이클(cycle)로 굴진을 하면서 분할효과를 거두기 위해 적절한 벤치길이를 결정하는 것이 중요한 요소로 판단하여 전단면, 미니벤치, 숏벤치로 풍화암 구간에 굴착한 터널을 모델링하여 이에 대해 3차원 탄소성해석을 수행하였다. 그리고 터널내 암반과 지보재의 거동에 영향을 미치는 주요 요소로 무지보 굴착구간의 길이, 측압계수, 숏크리트 두께 등의 설계변수를 변화시켜가며 암반의 변형거동을 분석하였다. 해석결과 내공변위는 숏벤치보다 미니벤치일때 벤치길이에 민감하게 반응하는 것으로 나타났으며 무지보길이가 길 때 하반굴착이 상반변위에 미치는 영향이 더 크게 나타나며 상반과하반측벽에서의 변위타이가증가하였다 K값의 증가에 따라 천정, 바닥보다 상하반 측벽부에서 변위와 선행변위비의 증가가 훨씬 크게 나타났다.

• 터널과지하공간
• /
• 제4권2호
• /
• pp.132-143
• /
• 1994

Many methods and techniques to reduce ground vibrations are well known. Some of them are to adopt electric millisecond detonators with a sequential blasting machine or an initiating system with an adequate number of delay intervals. The types of electric detonators manufactured in korea include instantaneous, decisecond and millisecond delays but numbers of delay intervals are only limited from No.1 to No.20 respectively. It is not sufficient to control accurately millisecond time with these detonators in tunnel excavation. Sequential fire time refers to adding an external time delay to a detonators norminal firing time to obtain sequential initiation and it is determined by sequential timer setting. To reduce the vibration level, sequential blasting machine(S.B.M) with decisecond detonators was adopted. A total of 134 blasts was recorede at various sites. Blast-to-structure distances ranged from 20.3 to 42.0 meter, where charge weight varied from 0.24 to 0.75 kg per delay. The results can be summarized as follow: 1. The effects of sequential blasting machine on the vibration level are discussed. The vibration level by S.B.M are decreased approximately 14.38~18.05% compare to level of conventional blasting and cycle time per round can be saved. 2. The empirical equations of particle velocity were obtained in S.B.M and conventional blasting. V=K(D/W1/3)-n, where the values for n and k are estimated to be 1.665 to 1.710 and 93.59 to 137 respectively. 3. The growth of cracks due to vibrations are found but the level fall to within allowable value.

• 터널과지하공간
• /
• 제31권6호
• /
• pp.460-468
• /
• 2021

TBM은 원형의 커터헤드를 회전하여 전단면으로 터널을 굴착하는 장비로 빠른 굴진속도와 안전한 시공이 장점이다. 건설현장에서 터널 굴착에 주로 사용되는 TBM은 정보통신기술의 적용이 용이한 장비로서 현재 무인화 및 자동화에 관련한 연구가 활발히 진행 중이다. 본 연구에서는 국외에서의 광물 및 에너지 자원 개발을 위한 TBM의 적용 사례를 살펴보고, 광물 및 에너지 자원 개발과 토목 건설현장에서 TBM 적용에 대한 차이를 살펴보았다. 그리고, TBM 선정 시에 기술적으로 고려해야 하는 지질조건, 심도, 현장 접근, 발진, 선형과 경사, TBM 크기 등을 알아보았다. 마지막으로 광산에서 TBM 적용 시의 장점과 단점 및 성공적인 광산 적용을 위하여 TBM이 기술적으로 갖추어야 하는 사항을 정리하였다.