Improvement of Tunnelling Speed in Full-Face Mechanical Excavation

기계굴착에서 굴착속도의 발전경향분석

  • 박철환 (한국지질자원연구원 지반안전연구부) ;
  • 박찬 (한국지질자원연구원 지반안전연구부) ;
  • 천대성 (한국지질자원연구원 지반안전연구부) ;
  • 신중호 (한국지질자원연구원 지반안전연구부)
  • Published : 2007.06.30

Abstract

Because of Norwegian topography as valleys and fjords, a large number of tunnels has been built and 59 of them have been excavated by TBM for last 30 years. Prognosis technology has been developed and improved through lots of TBM experiences, and the NTNU prediction model has been completed. This paper focuses the improvement of net penetration rate and advance rate in 14 Norwegian and 4 Koran TBM tunnelling sites of which data were reported. Through this period, net penetration rate as well as advance rate were increased to double with the improvement of disc cutter size and cutter arrangement in Norway. These rates in Korea were also increased for 15 years even though the rates were lower compared to Norwegian. It is estimated that these low rates were mainly caused by using disc cutters less than 17 inch diameter. It is expected that net penetration rate and advance rate can be increased by improvement of machine and tunnelling technology, especially by using 17 or 19 inch of the disc cutter size in the Korean full face mechanical tunnelling site.

노르웨이는 계곡이나 피요르드와 같은 굴곡이 심한 지형 때문에 터널이 많이 건설되었으며, 그 가운데 지난 30년 동안 59개의 터널이 전단면 기계굴착으로 완성되었다. 이러한 기계굴착 경험을 통하여 예측기법이 개발되고 발전되었으며 마침내 국립공과대학인 NTNU에서 예측법이 체계화되었다. 본 보고는 TBM 굴착자료가 알려진 14개의 노르웨이 터널과 4개의 국내의 터널에서 순굴착속도와 굴진속도를 분석하여, 이들의 발전경향을 연구한 것이다. 이 기간동안 노르웨이에서는 디스크 커터의 직경을 증대시키고 배열을 최적화하여 순굴착속도와 굴진속도를 두배 정도로 증진시켰다. 국내에서도 1980년부터 1990대까지 15년 동안 IBM의 굴진속도는 노르웨이에 비하여 작은 크기이지만 뚜렷이 증가하는 경향을 보였다. 이러한 작은 속도는 암반의 특성에도 기인하지만 17 인치보다 작은 직경의 디스크 커터를 사용한데 크게 기인된 것으로 판단된다. 향후 국내의 전단면 기계굴착에서 장비와 기술의 개선을 이루고, 특히 17 또는 19 인치의 디스크 커터를 사용한다면 순굴착속도와 굴진속도를 향상시킬 수 있을 것으로 예측된다.

Keywords

References

  1. 한국자원연구소, 1991, 전단면 터널 굴착기술 개발 연구, 한국자원연구소 연구보고서 KR-91-B-15, 과학기술처
  2. 박철환, 박연준, 2005, 노르웨이 메로케르 수력발전소의 TBM 굴착, 터널과 지하공간 제 15권, p. 22-27, 한국암반공학회
  3. 배규진, 장수호, 2006, 시공 리스크를 고려한 TBM의 굴진성능 향상 및 평가기술, 제 7차 터널 기계화 시공기술 심포지움 논문집, 한국터널공학회
  4. 부산직할시, 1987, 구덕 수로터널축조 건설지
  5. Brindheim O. T., E. Johansen and A. Hegreneas, 1998, 'Bored road tunnels in hard rock', Norwegian TBM Tunnelling, NSREA
  6. Hansen A., 1998, 'The history of TBM tunnelling in Norway', Norwegian TBM Tunnelling, NSREA
  7. Johannessen S. and O. Askilsrud, 1993, Meraker Hydro-Tunnelling - the Norwegian way, Proc. RETC 1993
  8. NTNU, 1994, Hard rock tunnel boring, Project Report 1-94