• Journal of IKEEE
• /
• v.16 no.3
• /
• pp.251-257
• /
• 2012

In this paper, low power on-channel DTV repeater is implemented to improve the fringe area of terrestrial DTV broadcasting services and its effectiveness is verified by field trials. System requirements of on-channel repeater are drive from received signal model and gain transfer model. Implemented on-channel DTV repeater has coverage of about 1km with 10mW/MHz output power. Experimental results show that implemented system can effectively improve small/medium size DTV fringe areas in Korea.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.17 no.11
• /
• pp.1234-1240
• /
• 2004

We studied on the electro-optic characteristics and dynamic stability according to an undesirably defined pretilt angle induced in high step coverage of pixel area for the Twisted Nematic (TN) / Fringe-Field Switching (FFS) mode. In case of the TN mode, LC directors twist reversely near the edges of thin-film-transistor and black matrix where the pretilt angle of the LC is not well defined. Therefore, the voltage-dependent dynamics of the LC in TN mode is unstable and shows the bad electro-optic characteristics. On the other hand, in case of the FFS mode, the LCs are twisted parallel to the bottom substrate by fringe electric field and the electro-optic characteristic is not influenced by the pretilt angle of the LC which is not well defined.

• Korean Journal of Optics and Photonics
• /
• v.20 no.1
• /
• pp.23-28
• /
• 2009

In this study, we propose an image stitching method for large-area holographic photo lithography. In this method, a hologram medium become a hologram mask for lithography. And the mask has information for stitched images. These images are recorded by signal images which are controlled with DMD (digital micro-mirror device), and serial hologram recording is achieved with a motorized linear stage. Using this method, fringe seams appear on the stitching area. To remove these fringe seams, double exposure holographic lithography is tried. Each stitched image is recorded and reconstructed with a different reference beam. The experiments confirm that fringe seams are removed.

• Journal of Broadcast Engineering
• /
• v.21 no.1
• /
• pp.97-104
• /
• 2016

In this paper, in order to relieve the area of terrestrial DTV broadcasting, we watch the same channel DTV Repeater output ICS using nano field test and analysis of effect was proven. Interspersed throughout the blanket area(natural) and buildings(artificially) 7 established the field selected as the test area, and each station(KBS1, KBS2, MBC, SBS, EBS) Extremely Low Power ICS Repeater the same channel of the receiving field strength and after install, SNR(Signal to Noise Ratios) verify the equipment to measure the efficacy and minimal output for future ICS type nav should you wish to provide a research-based for the spread.

• Journal of Korean Society of Rural Planning
• /
• v.3 no.2
• /
• pp.71-80
• /
• 1997

The city's countryside is adjusting to change by urbanization. The recent changes in rural landuse and damages of local landscape characteristics are very serious. But, few studies address the relationship between land-use and quality of landscape for these area. The aim of this study is to clarify causes and problems of the change through investigating changes of landscape as a function of land-use. The results are as follows 1) The change of landscape can be seen as a functional of land-use. Landscapes are characterized by changes of regional environments. These are the urban-rural fringe area which need special consideration for urban development and also for rural landscape quality. 2) 11 types of landscape patterns are found for landscape management. these are Regional commercial area, Apartment development, Recreation & seisure, Golfs, Housing complex, Industrial complex, Vinyl house, Rural village, Evaded facilities, Rivers, Cultural heritages. These landscape types are explained as 'stimuli-responses model'in Bryant's Forces of urbanization. 3) The policy implications of these study are as follows : First is the necessity of landscape management in Grown Management Zone and Natural Reserved Zone in the Metropolitan level, Second is the necessity of development control in semi- agricultural area. The last is the necessary of long range management plan in the urban-rural fringe area.

• Journal of the Microelectronics and Packaging Society
• /
• v.22 no.3
• /
• pp.57-65
• /
• 2015

Electronic packages consist of various materials, and as temperature changes, warpage occurs because of the difference in coefficient of thermal expansion. Shadow $moir{\acute{e}}$ is non-contact, whole field measurement technique for out-of-plane displacement. However, the technique has low sensitivity above $50{\mu}m/fringe$, it is not adequate for the warpage measurement in some circumstance. In this paper, by applying phase shifting process to the traditional shadow $moir{\acute{e}}$, measurement system having enhanced sensitivity of $12.5{\mu}m/fringe$ is constructed. Considering Talbot effect, the measurement is carried out in the half Talbot area. Shadow fringe pattern having four times enhanced sensitivity is obtained by the image process with four shadow fringes. The measurement technique is applied to the fibered package substrate and coreless package substrate for measuring warpages at room temperature and at about $100^{\circ}C$.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.10 no.2
• /
• pp.36-46
• /
• 2007

The primary purpose of this study is to identify the characteristics of land use change at the urban fringe. For this purpose, the Daegu Metropolitan City is selected as a study area. Land use changes between 1990 and 2000 in fringe areas are identified by processing Landsat TM5 imageries. The main findings are follows: First, land development has been driven by residential development, especially large-scale residential development encouraged by the two-million housing construction plan. Second, the type and size of the land use conversion are not identical across the study area. For example, the main land use type of the newly developed area of Buk-gu is residential use while that of Suseong-gu is public use. Third, most of residential development type is a high-density development which is quite different from American type of low-density development.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.18 no.11
• /
• pp.1033-1037
• /
• 2005

We have studied on the effect of the operation voltage according to the reverse twist for the different fringe field switching (FFS) structure. The FFS structure with a vertically patterned edge of the pixel electrode (VPP) has lower operation voltage comparing to the one with a horizontally patterned edge of the pixel electrode (HPP). The reason is like that the number of the pattern of the pixel edge for the VPP structure is one third comparing with the HPP structure and thus, there is small reverse twist area for the VPP structure. Actually, the reverse twist disturbs the twist of LC near adjacent active area, result that LCs near there have the unstable dynamics. That is, the operation voltage increases as the reverse twist area increases. Therefore, it is very important to design pixel electrode with a small reverse twist region for the FFS mode.

• Journal of Mechanical Science and Technology
• /
• v.17 no.11
• /
• pp.1704-1713
• /
• 2003

Point contact film thickness in elastohydrodynamic lubrication (EHL) is analyzed by image processing method for the images from an optical interferometer with monochromatic incident light. Interference between the reflected lights both on half mirror Cr coating of glass disk and on super finished ball makes circular fringes depending on the contact conditions such as sliding velocity, applied load, viscosity-pressure characteristics and viscosity of lubricant under ambient pressure. In this situation the film thickness is regarded as the difference of optical paths between those reflected lights, which make dark and bright fringes with monochromatic incident light. The film thickness is computed by numbering the dark and bright fringe orders and the intensity (gray scale image) in each fringe regime is mapped to the corresponding film thickness. In this work, we developed a measuring technique for EHL film thickness by dividing the image patterns into two typical types under the condition of monochromatic incident light. During the image processing, the captured image is converted into digitally formatted data over the contact area without any loss of the image information of interferogram and it is also interpreted with consistency regardless of the observer's experimental experience. It is expected that the developed image processing method will provide a valuable basis to develop the image processing technique for color fringes, which is generally used for the measurement of relatively thin films in higher resolution.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.1C
• /
• pp.51-58
• /
• 2007

The purpose of this paper is to find an efficient encryption scheme for digital holograms (fringe patterns) with low encryption cost. Therefore, we introduced several encryption attempts in both hologram-domain and frequency-domain (both DCT-domain and DWT-domain) on the bases of the results from analyzing the properties of the coefficients in each domain. To effectively hide the image information, 25%, 1.5625%, and 0.0244% of the original fringe pattern need to be encrypted for hologram-domain scheme, DWT-domain scheme, and DCT-domain scheme, respectively. Consequently the DCT-domain scheme was the most efficient and it is caused by the fact that the ability for DCT to concentrate the energy of a given 2-dimensional image into a small area is the best. The encryption schemes and the analyses in this paper are expected to be used effectively on the researches on encryption and others for digital holograms.