• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2003.11a
• /
• pp.304-308
• /
• 2003

A low cost solution employing harmonic oscillation to the frequency synthesizer at 5.8 GHz is proposed. The proposed frequency synthesizer is composed of 2.9GHz PLL chip, 2.9GHz oscillator, and 5.8GHz buffer amplifier. The measured data shows a frequency tuning range of 290MHz, ranging from 5.65 to 5.94GHz, about 0.5dBm of output power, and a phase noise of -107.67 dBc/Hz at the 100kHz offset frequency. All spurious signals including fundamental oscillation power (2.9GHz) are suppressed at least 15dBc than the desired second harmonic signal.

• Journal of the Korea Safety Management & Science
• /
• v.17 no.3
• /
• pp.377-381
• /
• 2015

For the first time, PLL frequency synthesizer using DDS was adapted for the data link communication system which should fast transmit and receive each other with the correct information and fast Hopping System. It is inevitable to lost the synchronization by slow lock time about PLL and no cut off the noise. This paper propose the design of PLL frequency synthesizer which can make 800MHz frequency range. The PLL frequency synthesizer has three high qualities those are frequency accuracy, fast lock time and outstanding phase noise.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.26 no.3
• /
• pp.333-341
• /
• 2015

In this paper, a 0.5~4 GHz frequency synthesizer having good phase noise performance is proposed. Wideband output frequencies of the synthesizer were synthesized using DDS(Direct Digital Synthesizer) and analog direct frequency synthesis technology in order to obtain fast settling time. Also in order to get good phase noise performance, 2.4 GHz DDS clock was generated by VCO(Voltage Controlled Oscillator) which was locked by the 100 MHz reference oscillator using SPD(Sample Phase Detector). The phase noise performance of wideband frequency synthesizer was estimated and the results were compared with the measured ones. The measured phase noise of the frequency synthesizer was less then -121 dBc @ 100 kHz at 4 GHz.

• Proceedings of the KIEE Conference
• /
• 1987.11a
• /
• pp.86-89
• /
• 1987

This paper treats with the design and fabrication of a frequency synthesizer for the generation of intermediate frequency of a HF band transceiver. The synthesizer is designed to control frequencies using a phase-locked loop and it is shown that method improved the performance of frequency accuracy and locking time then that of the crystal-reference system.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.13 no.6
• /
• pp.546-551
• /
• 2002

In this paper, a triple controlled type DDFS-driven PLL frequency synthesizer with reduced complexity is used to show its applications for broadband wireless communication systems by frequency synthesis control. Since the proposed DDFS-driven PLL synthesizer is very simplified to use only phase accumulator in DDFS, it improves the switching speed and power consumption than the conventional DDFS-driven PLL frequency synthesizer. It is appropriate for applications with requirements of broadband, low-power consumption and high switching speed, since the proposed synthesizer can cover a wide range of frequency bands by the triple frequency control parameters. Method and results of frequency control parameters assignment are shown for the several frequency bands applications such as GSM, IMT-2000, Bluetooth and PCS system.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.17 no.6
• /
• pp.51-57
• /
• 2017

In this paper, we designed a frequency synthesizer using DDS (Direct Digital Synthesizer) for Ka-band compact Radar. DDS is applied to generate various waveform and to cover high-speed frequency sweep. In order to reduce size, waveform generator and Ka band frequency up-converter are integrated in one module. Proposed frequency synthesizer provides LFM(Linear Frequency Modulation) waveform and Phase modulated FMCW (Frequency Modulation Continuous Wave) waveform. It is observed that fabricated synthesizer performs $0.191{\mu}sec$ frequency switching time and -89.16 dBc/Hz phase noise at offset 1 kHz.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.13 no.5
• /
• pp.775-784
• /
• 2010

In this paper we propose a design method of X band frequency hopping synthesizer in terms of phase noise and settling time with DDS driven PLL architecture, which has the advantages of high frequency resolution, fast settling time and small size. In addition, a noble method is proposed to remove the synthesizer output spurious signals due to superposition effect of DDS. The spurious signal which depend on its normalized frequency of DDS, can be dominant if they occur within the PLL loop bandwidth. We verify that the sources of that spurious signals are quasi-amplitude modulation and superposition effect, and suggest that such signals can be eliminated by intentionally creating frequency errors in the developed synthesizer.

• Proceedings of the KIEE Conference
• /
• 2003.11c
• /
• pp.890-893
• /
• 2003

In this paper, we have designed the fractional-N frequency synthesizer for bluetooth system using 0.35-um CMOS technology and 3.3-V single power supply. The designed synthesizer consist of phase-frequency detector (PFD), charge pump, loop filter, voltage controlled oscillator (VCO), frequency divider, and sigma-delta modulator. A dead zone free PFD is used and a modified charge pump having active cascode transistors is used. A Multi-modulus prescaler having CML D flip-flop is used and VCO having a tuning range from 746 MHz to 2.632 GHz at 3.3 V power supply is used. Total power dissipation is 32 mW and phase noise is -118 dBc/Hz at 1 MHz offset.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.48 no.12
• /
• pp.28-34
• /
• 2011

In this paper, a PLL frequency synthesizer for RSSI applications is designed by phase noise analysis. Required synthesizer performance is achieved by optimizing the noise performance of PLL components and a loop transfer function, since its phase noise, lock time, and spur suppression capability are determined by the performance of loop components and loop filter characteristics. As an application example, a PLL frequency synthesizer for RSSI applications, which operates at the frequency of 2.288GHz, is designed using the phase noise analysis. The validity of the design technique is proved by experiments.

• The Journal of Information Technology
• /
• v.12 no.4
• /
• pp.11-17
• /
• 2009

In this paper, frequency synthesizer for radar system is designed and developed. Optimizing the phase noise and lock time, each module is designed as two-type PLL circuit, and then the performance of PLL frequency synthesizer is compared. The experiment result shows the lock time of 70 usec, the phase noise of less then 100 dBc, the bandwidth above 500MHz.