• 한국통신학회논문지
• /
• 제31권6B호
• /
• pp.495-507
• /
• 2006

무선 LAN에서 스케줄링 알고리즘은 실시간 멀티미디어 서비스가 요구하는 엄격한 QoS(Quality of Service) 요구사항을 보장하는데 있어 가장 중요한 요소 중 하나이다. 본 논문에서는 MPEG 스트림과 같은 멀티미디어 트래픽의 지연을 보장하기 위한 다중폴링 기반의 동적 스케줄링 알고리즘을 제안한다. 제안된 알고리즘은 MPEG 스트림의 특성을 이용한다. 채널할당 요청 정보를 갖고 있는 동적 파라미터를 AP(Access Point)에서 동작하는 PC(Point Coordinator)로 전달하기 위해 미니 프레임이라는 피드백(Feedback) 제어 프레임을 이용한다. 하나의 수퍼프레임 동안에 각 단말에 할당될 채널시간은 MPEG 프레임 종류와 트래픽 양, MPEG 프레임의 지연한도(Delay bound) 등에 따라 동적으로 변한다. 시뮬레이션을 통하여 제안된 방법의 성능을 다른 방법과 비교 분석한다. 비교 분석결과, 제안된 방법이 지연한도를 보장하면서 높은 성능을 보임을 확인하였다.

• Journal of Communications and Networks
• /
• 제5권2호
• /
• pp.141-149
• /
• 2003

In this paper, we investigate design criteria and the performance of the space-frequency bit-interleaved coded modulation (SF-BICM) systems in frequency-selective Rayleigh fading channels. To determine the key parameters that affect the performance of SF-BICM, we derive the pairwise error probability (PEP) in terms of the determinant of the matrix corresponding to any two codewords. We prove that the bit-interleavers do the function of distributing the nonzero bits uniformly such that two or more nonzero bits are seldom distributed into the symbols that are transmitted in the same frequency bin. This implies that the bit-interleavers transform an SF-BICM system into an equivalent 1-antenna system. Based on this, we present design criteria of SFBICM systems that maximizes the diversity order and the coding gain. Then, we analyze the performance of SF-BICM for the case of 2-transmit antennas and 2-multipaths by deriving a frame error rate (FER) bound. The derived bound is accurate and requires only the distance spectrum of the constituent codes of SF-BICM. Numerical results reveal that the bound is tight enough to estimate the performance of SF-BICM very accurately.

• 한국통신학회논문지
• /
• 제28권4A호
• /
• pp.208-215
• /
• 2003

H-ARQ를 적용한 시스템에서 최대 수율(throughput)을 얻기 위한 Target PER을 수치적 해석 방법을 이용하여 구하였고 시뮬레이션 과정을 통하여 검증하였다. 수치적 해석 방법을 위하여 chase combine의 효과는 해밍 거리가 증가하는 효과로 간주하였고 이를 바탕으로 수율 계산식과 터보 부호에서 평균 상호값(Average upper bound)을 이용한 PER간의 연계식을 유도하여 최적의 Targer PER값을 구했다. 그 결과 H-ARQ방법이 적용된 경우 현재 3GPP2 표준에 선정되어 있는 5%에 비해 더 높은 6% target PERㅇ에서 최대 수율이 나타나는 결과를 확인할 수 있었다.

• Journal of Communications and Networks
• /
• 제6권1호
• /
• pp.1-8
• /
• 2004

In this paper, we investigate the properties and performance of space-time bit-interleaved coded modulation (STBICM) systems in fast Rayleigh fading channels. We first show that ST-BICM with QPSK signaling in fast fading channels possesses the uniform distance property, which makes performance analysis tractable. We also derive the probability distribution of the squared Euclidean distance between space-time symbols assuming uniform bit-interleaving. Based on the distribution, we show that the diversity order for each codeword pair becomes maximized as the frame length becomes sufficiently long. This maximum diversity order property implies that the bit-interleaver transforms an ST-BICM system over transmit diversity channels into an equivalent coded BPSK system over independent fading channels. We analyze the performance of ST-BICM in fast fading channels by deriving an FER upper bound. The derived bound turns out very accurate, requiring only the distance spectrum of the binary channel codes of ST-BICM. Numerical results demonstrate that the bound is tight enough to render an accurate estimate of performance of ST-BICM systems.

• Architectural research
• /
• 제2권1호
• /
• pp.47-54
• /
• 2000

The critical load of a continuous compression member was determined by the beam-analogy method. The proposed method utilizes the stress-analysis results of the analogous continuous beam, where imaginary concentrated lateral load changing its direction is applied at each midspan. The proposed method gives a lower bound error of critical load and can predict the span that buckles first. The effective length factors for braced frame columns can be easily determined by the present method, but result in the upper bound errors in all cases, which can lead to a conservative structural design.

• 수산해양기술연구
• /
• 제42권1호
• /
• pp.1-10
• /
• 2006

Present study was conducted to improve the spring frame net trap for conger eel, Conger myriaster which prevents by-catch and protects immature fish. A series of comparative fishing experiment was carried out in water off the south-east coast of Korea from Nov. 2004 to Jul. 2005. And analyzed the amount of catch, by-catch rate, and CPUE, etc. of experimental traps which were the spring frame net traps, sorted four types of flappers. And the compared gear was a plastic conger eel pot. The conclusions were as follows. By-catch rates of spring frame net trap with the compressed flapper bound by nylon mono-filament was about 0-3%. CPUE of spring frame net trap with the compressed flapper was about 50-60% lower than that of traditional and plastic pot. And in case of conger eel that the total length is over 350mm, CPUE was little different on each type of flapper of every mesh size.

• Structural Engineering and Mechanics
• /
• 제33권2호
• /
• pp.159-177
• /
• 2009

The aim of this paper is to give a rigorous framework for the interpretation of limit analysis results including large displacements. The presentation is oriented towards unidimensional media (beams) but two-dimensional (plates) or three-dimensional media are also concerned. A single-degree-of-freedom system is first considered: it shows the basic phenomena of large displacement limit analysis or second-order limit analysis. The results are compared to those of a continuous system and the differences between both systems are discussed. Theoretical results are obtained using the kinematical approach of limit analysis. An admissible load-displacement plane is then defined, according to the yield design theory. The methodology used is applied to frame structures. The presented results are nevertheless different from those already published in the literature, as the virtual displacement field can be distinguished from the displacement field at collapse. The simplicity of large displacement limit analysis makes it attractive for practical engineering applications. The load-displacement upper bound can be used for instance in the optimal design of steel frames in seismic areas.

• 한국정밀공학회지
• /
• 제16권2호통권95호
• /
• pp.68-73
• /
• 1999

Generally, most of machining processes are done according to the dimention of the draft made by CAD. However, there are many cases that a sample is given without the draft because of the simplicity of the shape in the machining of 2D objects. To cut the same shape as the given sample, this paper proposes the method to extract the geometric information about a large sample using the robot vision and to draw the demensional draft for the machining. Because the resolution of one frame in the vision system is too low, it is necessary to set up a camera according to the desired resolution and to capture the image moving along the contour. And the overall outline can be compounded of the sequentially captured images. In the experiment, we compared the product after the cutting with the original sample and found that the size of two objects was coincided within the allowed error bound.

• 한국지진공학회:학술대회논문집
• /
• 한국지진공학회 1998년도 추계 학술발표회 논문집 Proceedings of EESK Conference-Spring 1998
• /
• pp.28-35
• /
• 1998

The seismic overstrength factor $\Omega$ is evaluated for 4-story reinforced concrete buildings in Korea(of which seismic intensity is low). The study model is designed according to aseismic guideline research - phase II in Korea. The effect of variation of span length and bay number, dead load is considered, especially including the variation of hardening ration after yielding. And push-over analysis is performed, in which the external and internal frame is connected by rigid-link and the $\Omega$ is calculated using the roof drift ratio at 2%. For Zone I, the mean value of $\Omega$ is ranged form 2.3 to 2.5, For Zone II, from 3.1 to 3.4. For low hardening ratio(3%) after yielding, $\Omega$ has little relations with the number of bay, like as the results of other research. But for 5% hardening ratio, $\Omega$ is increased as the number of bay is increased. Within general gravity-load bound, the variation of D.L. has variation of D. L. has no effect on $\Omega$. And, $\Omega$ is increased as the span length is increased.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1998년도 가을 학술발표논문집(II)
• /
• pp.456-461
• /
• 1998

This paper presents the results from a combination of strut-and-tie model and analytical study that investigated the ultimate strength of wall system with frame supports. Strut-and-tie models show reasonable force flows and upper bound solution is compared to the results from FEM analysis. The results shows that two main parameters - transfer girder depth and column width - yield good estimation of the ultimate strength of the system. Vertical and horizontal reinforcements of the transfer girder add few strength to the whole system. The proposed design strength formula shows good agreement with the results from FEM analysis.