• Proceedings of the KIPE Conference
• /
• 2009.11a
• /
• pp.167-169
• /
• 2009

본 논문에서는 Forward DC/DC 컨버터 설계에 있어서 출력 커패시터에 따른 제어기 설계를 제안한다. 최근 DC/DC 컨버터의 소형화로 스위칭 주파수가 고주파로 됨에 따라 출력 커패시터는 전해 커패시터에서 Tantal 커패시터와 MLCC로 대체되는 추세이다. 이에 본 논문에서는 Tantal 커패시터와 MLCC의 특성을 분석하고 각각의 출력 커패시터 특성에 따른 안정적인 제어기를 설계하였으며, 시뮬레이션과 실험을 통해서 검증하였다. 본 논문에서는 50W급 Forward DC/DC 컨버터를 제작하여 스텝응답 테스트를 통해서 제시한 설계 기법이 타당함을 검증하였다.

• Proceedings of the KIPE Conference
• /
• 2011.07a
• /
• pp.455-456
• /
• 2011

본 논문에서는 Boost 컨버터와 Forward 컨버터를 조합한 컨버터를 제안한다. 제안하는 컨버터는 시스템 구성상 다수의 독립된 전원을 요구하는 Cascaded H-bridge 멀티레벨인버터와 같은 회로구조에 있어 다수의 독립전원의 확보가 곤란한 경우 단일 입력 전원단으로 시스템을 구성할 수 있는 특징을 가진다. Boost 컨버터의 입력 인덕터는 변압기로 대체되며 컨버터 스위치의 ON 동작시 변압기 일차측 자화인덕턴스에 저장된 에너지가 변압기 이차측과 비절연된 Boost 컨버터의 출력 커패시터로 전달된다. 제안된 컨버터의 동작 모드에 따른 이론적 분석을 시행하고 시뮬레이션을 통해 타당성을 검증한다.

• Journal of Power Electronics
• /
• v.10 no.3
• /
• pp.245-250
• /
• 2010

Input-series-output-parallel (ISOP) converters consisting of multiple modular DC/DC converters can enable low voltage rating switches to be used under high voltage input applications. This paper presents a digital control strategy, which can achieve equal sharing of input voltage for a modular ISOP system consisting of two-transistor forward DC/DC converters by forcing the input voltages of neighboring modules to be equal. The proposed scheme is analyzed using small signals analysis based on the state space average method. The performance of the proposed control strategy is verified with an experimental prototype of an ISOP converter made up of three two-switch forward converters.

• Proceedings of the KIPE Conference
• /
• 2010.07a
• /
• pp.140-141
• /
• 2010

최근 저전압 입력에 의한 대용량 DC/DC 컨버터의 수요가 급증함에 따라 대용량 DC/DC 컨버터에서도 효율 및 저가화가 매우 중요한 요소로 자리 잡고 있다. 따라서 본 연구에서는 저전압 대용량용 DC/DC 컨버터 구성에서 고효율 및 저가화를 위해 1개의 능동 스위치 소자에 의한 ZCS를 구현할 수 있는 새로운 타입의 공진형 Forward DC/DC 컨버터 구조를 제안하고, 시뮬레이션을 통해 제안된 방식의 타당성을 검증하였다.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.13 no.3
• /
• pp.82-92
• /
• 1999

In this paper, we realize the active PFC(Power Factor Correction) system of the BF(Boost Forward) converter with the PWM-PFM control technique to control DC output voltage, to rermve the noise like hanronics at the output voltage, amd to control the input ClUTent with sinusoidal wave synchronized by the source voltage. We take the simulation and analyze the switching signal of the BF converter, input/output voltage and current, its harmonics and power factor through PSpice. And it has bren obtained harmonic reduction and efficiency improverrent.errent.

• Proceedings of the KIPE Conference
• /
• 2004.07b
• /
• pp.807-810
• /
• 2004

This is a experimental result which is reported with using 16-Bit microprocessor H8 series of Renesas company, organizing digital control which is practicable PWM embodiment, and applying switched-mode power supply. The basic topology consists of the active clamp forward DC-DC converter which is widely used for the highly efficient power supply these days. In an experiment, it incites the result to lay emphasis on the highly efficient operation of converter, and performance of digital control which is practicable PWM embodiment. And it is debated on performance of processor and condition for improving performance of part.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.7 no.2
• /
• pp.94-97
• /
• 2007

The desin and implementation of a CMOS analog integrated circuit that provides dual-mode modulations, PWM for active clamp reset converter and PFM for LLC resonant converter, is described. The proposed controller is capable of implementing programmable soft start and current-mode control with compensating ramp for PWM and frequency shifting soft start for PFM. Also it provides delay time for both modes. PWM mode is implemented by active clamp reset converter and PFM mode is implemented by LLC resonant convereter, respectively. The chip is fabricated using the 0.6um high voltage CMOS process.

• Proceedings of the KIPE Conference
• /
• 2018.11a
• /
• pp.223-224
• /
• 2018

본 논문에서는 전기자동차용 저전압 배터리 충전기(Low-voltage DC-DC Converter, LDC)에 적합한 입력 직렬-출력 병렬 구조의 능동 클램프 포워드 컨버터의 모델링 및 제어기 설계를 제안한다. 제안하는 컨버터는 모든 스위치에서 소프트 스위칭을 성취하기 때문에 높은 효율을 달성할 수 있다. 또한 누설 인덕턴스의 영향을 포함한 컨버터의 정확한 소신호 모델을 통하여 모델링 기반의 제어기 설계를 제시한다. 제어기의 시뮬레이션 및 3.2kW급 시작품의 실험을 통하여 제안하는 컨버터의 성능을 검증하였다.

• Journal of Advanced Information Technology and Convergence
• /
• v.9 no.2
• /
• pp.75-87
• /
• 2019

This paper presents a fully digital controlled power supply unit for the wireless controlled dimmable LED lighting system. The proposed power supply designed using a fly-back converter, which is directly controlled by a microprocessor. Although the proposed circuit does not sense the AC input current and has not AC input voltage feed-forward, it can achieve a high power factor. The proposed power supply directly regulates the output power for LED loads using the PWM and PFM control of the fly-back converter without additional regulator. For a wireless remote control function, the Zigbee modem is equipped in the proposed power supply. A prototype set-up has been built and tested. Through the experiment with a prototype set-up, the usefulness of the proposed power supply is verified.

• Journal of the Institute of Electronics Engineers of Korea TE
• /
• v.37 no.1
• /
• pp.89-98
• /
• 2000

This paper presented a design technique of planar magnetic components for forward converter. Planar magnetic components are a good solution for high frequency switching-mode power supplies(SMPS). Since these kind of magnetic components have some advantages(low leakage inductance, low profile, low weight, minimum EMI etc.) that improve the SMPS performance, their use is growing in the last years. In this paper, the performance of designed system is verified by simulation and experiment by comparing the system using conventional magnetic components and the system using planar magnetic components.