• Journal of Bio-Environment Control
• /
• v.32 no.4
• /
• pp.513-520
• /
• 2023

Korean melon (Cucumis melo L.) is an environment in which most farming work can affect the increase in musculoskeletal diseases, and the stems are attracted to the ground in order to grow no-heating cultivation. In this study, growth and productivity were compared according to the type of high-bed. The narrower the surface area at the bottom of the high-bed, the faster the initial growth, which was advantageous. The bed is which the height if 70 cm, the surface temperature has risen due to the increase in direct solar radiation inflow since April, requiring side light blocking to block the inflow of solar radiation. In terms of fruit quality, the 200 cm width treatment had higher fruit sugar content and better hardness than the 160 cm treatment. From April to September, the total yield was 6.8 kg/plant of treatment A, 8.7 kg/plant of treatment B, 5.8 kg/plant of treatment C, treatment B mainly 50% higher than treatment C, and 27% higher than treatment A. Therefore, the bed form suitable for Korean melon high bed is 200 cm wide, 40 cm high between the surface and the bed, and the surface of the passage between the beds is 30cm high from the ground to the bed.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.25 no.4B
• /
• pp.715-724
• /
• 2000

This Paper presents 3-D subband filter banks which are effective for progressive and lossless compression of volumetric images. For such a purpose, ORT(Overlapping Rounding Transform), applied so far to 1-D losslesssubband filter banks, is now used to implement two types of 3-D lossless subband filter banks: separable andnon-separable types. Separable fiter banks are implemented form applying 1-D lossless filter banks consecutively.Non-separable later banks are developed by expanding the 1-D ORT into 3-D one. In particular, the proposed ORT based 3-D non-separable filter banks generalizes the 3-D HINT(Hierarchical INTerpolation) algorithm.Through the experiment comparisons on various volumetric medical images, we prove that the proposedseparablefnon-separable filter banks perform better, in terms of compression ratio (first order entropy), than theother lossless compression techniques such as block based transform and conventional 3-D HINT.

• Journal of the Korean Chemical Society
• /
• v.20 no.1
• /
• pp.3-14
• /
• 1976

The crystal structure of alicylaldehyde-4-piperidinothiosemicarbazone, $C_{13}H_{l7}N_3OS$, has been determined by single crystal X-ray analysis. The crystals are orthorhombic, space group $P2_12_12_1$, with unit cell dimensions a = 6.52(2), b = 13.42(4), c = 14.92(4)${\AA}$. There are four formular units in a unit cell. The structure was solved by the heavy atom method and refined by isotropic block diagonal least-squares methods to a final R value of 0.10 for 1019 observed reflections. The oxygen atom of the hydroxyl group is involved in two hydrogen bonds, one as donor in the intramolecular O-H${\cdots}$N hydrogen bond and the other as acceptor in the intermolecular N-H${\cdots}$O hydrogen bond, the distances of the hydrogen bonds 2.56 and 3.00${\AA}$ respectively.The molecules are joined into infinite columns by the N-H${\cdots}o$O hydrogen bonds which form spirals along the two fold screw axis parallel to the a axis. The molecular columns are held together by van der Waals forces.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.35 no.6
• /
• pp.353-359
• /
• 2013

Purpose: Extensive research is actively ongoing for development of an ideal bone substitute that meets the gold standard. Tooth was selected as a donor site for evaluation of potentials in bone substitutes based on its similar chemical compositions to alveolar bone. Previous studies have evaluated inorganic components of autogenous tooth bone graft material (AutoBT) and osteoconductivity. In continuation from the previous studies, the current study was conducted for analysis of organic components and evaluation of osteoinductivity of AutoBT. Methods: Forty-six extracted teeth were collected from actual patients (Korea Tooth Bank, R&D Institute). Extracted teeth were processed into AutoBT and implanted in dorsal subcutaneous muscular tissues of 15 athymic mice. Biopsy samples were harvested at two, five, and eight weeks. The Bradford assay, sodium dodecyl sulphate polyacrylamide gradient gel, and western blotting were performed for investigation of organic contents of AutoBT. Results: Histology analyses showed signs of new bone formation as early as two weeks. Results of the Bradford assay indicated the existence of noncollagenous proteins (NCP). 0.29% (2.89 mg/g) of proteins were extracted by weight in the root portion of AutoBT; 0.02% (0.029 mg/g) and 1.79% (17.93 mg/g) of proteins were measured by weight in crown and block-form of AutoBT, respectively. However, recombinant human bone morphogenetic protein-2 was not observed in AutoBT. Conclusion: Within the limitation of the current study, AutoBT induced new bone formation by NCP embedded in dentin.

• Clinical and Experimental Pediatrics
• /
• v.59 no.7
• /
• pp.292-297
• /
• 2016

Purpose: To compare different regimens of vitamin D with respect to its serum increment levels and bone mineral accrual in vitamin D-deficient children. Methods: Children identified as being vitamin D deficient (serum levels<20 ng/mL) were divided into 3 treatment groups by stratified block randomization (group 1, 4,000 IU/day of vitamin D3 plus 50 mg/kg/day calcium for 12 weeks; group 2, 30,000 IU/wk of vitamin D3 plus 50 mg/kg/day calcium for 12 weeks; and group 3, 300,000 IU of vitamin D3 once intramuscularly plus 50 mg/kg/day calcium). After regimen completion, each child received a maintenance dose of 400 IU/day vitamin D3 plus 50 mg/kg/day calcium. Their serum vitamin D level was measured after 3 and 12 months. Total body less head bone mineral concentration (BMC) and total body less head bone mineral density (BMD) were measured after 12 months. Results: The mean increment in serum vitamin D levels from baseline to 3 months was significantly higher in group 3 than in groups 1 and 2, but the levels from 3 to 12 months were almost similar among all 3 groups. There were no significant differences among the 3 groups with respect to percentage increase of BMD and BMC. Conclusion: The injectable form of vitamin D was more efficacious than the oral forms in increasing the serum level to the normal range. All 3 regimens were equally effective in increasing the BMC and BMD. The 400 IU/day maintenance dose was sufficient to keep the serum level within the normal range.

• Journal of Microbiology and Biotechnology
• /
• v.27 no.4
• /
• pp.694-700
• /
• 2017

Clostridium difficile, which causes pseudomembranous colitis, releases toxin A and toxin B. These toxins are considered to be the main causative agents for the disease pathogenesis, and their expression is associated with a marked increase of apoptosis in mucosal epithelial cells. Colonic epithelial cells are believed to form a physical barrier between the lumen and the submucosa, and abnormally increased mucosal epithelial cell apoptosis is considered to be an initial step in gut inflammation responses. Therefore, one approach to treating pseudomembranous colitis would be to develop agents that block the mucosal epithelial cell apoptosis caused by toxin A, thus restoring barrier function and curing inflammatory responses in the gut. We recently isolated an antimicrobial peptide, Periplanetasin-2 (Peri-2, YPCKLNLKLGKVPFH) from the American cockroach, whose extracts have shown great potential for clinical use. Here, we assessed whether Peri-2 could inhibit the cell toxicity and inflammation caused by C. difficile toxin A. Indeed, in human colonocyte HT29 cells, Peri-2 inhibited the toxin A-induced decrease in cell proliferation and ameliorated the cell apoptosis induced by this toxin. Moreover, in the toxin A-induced mouse enteritis model, Peri-2 blocked the mucosal disruption and inflammatory response caused by toxin A. These results suggest that the American cockroach peptide Peri-2 could be a possible drug candidate for addressing the pseudomembranous colitis caused by C. difficile toxin A.

• Journal of Periodontal and Implant Science
• /
• v.28 no.4
• /
• pp.559-568
• /
• 1998

direct bone apposition during bone remodelling. To address these problem, we developed a new ceramic, calcium metaphosphate(CMP), and report herein the biologic response to CMP in subcutaneous tissue, muscle and bone. Porous CMP blocks were prepared by condensation of anhydrous $Ca(H_2PO_4)_2$ to form non-crystalline $Ca(PO_3)_2$. Macroporous scaffolds were made using a polyurethane sponge method. CMP block possesses a macroporous structure with approximate pore size range of 0.3-1mm. CMP blocks were implanted in 8mm sized calvarial defect, subcutaneous tissue and muscle of 6 Newzealand White rabbits and histologic observation were performed at 4 and 6 weeks later. CMP blocks in subcutaneous tissue and muscle were well adapted without any adverse tissue reaction and resorbed slowly and spontaneously. Histologic observation of calvarial defect at 4 and 6 weeks revealed that CMP matrix were mingled with and directly apposed to new bone without any intervention of fibrous connective tissue. CMP blocks didn't show any adverse tissue reaction and resorbed spontaneously also in calvarial defect. This result revealed that CMP had a high affinity for bone and was very biocompatible. From this preliminary result, it was suggested that CMP was a promising ceramic as a bone substitute and tissue engineering scaffold for bone formation.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.26 no.3
• /
• pp.317-325
• /
• 2015

In an interference environment, adaptive sidelobe blanking(adaptive SLB: ASB) algorithm effectively cancels the high-duty cycle jammer and blocks the sidelobe signals without the auxiliary antenna. The adaptive SLB for the linearly constrained minimum variance (LCMV) is proposed in this paper. In the proposed scheme, the interference covariance matrix is modified to satisfy the direction constraints of LCMV and the normalized output can be obtained to block sidelobe signals. As the LCMV can be represented as a generalized sidelobe canceller(GSC) form, which is the general framework of various adaptive beamforming(ABF) algorithms, the proposed adaptive SLB can be applied to various ABF methods. The performance of the proposed method is verified through simulation and analysis.

• Journal of the Korean Society of Costume
• /
• v.17
• /
• pp.137-148
• /
• 1991

The use of bark cloth, made of the inner bark of certain trees, was widespread along tropical zones from the Africa to the Hawaii encompassing the globe. They include Malaysia, Indonesia, New Guinea, Polynesian Islands and South America. Among them the Hawaiian bark cloth, named Kapa(pronounced as tapa) was rated as the best quality and most admired. It has variety in designs and colors as well as the most sophistcated production methods. The distinct processes of kapa making are composed of two stages. The first is called first beating and it is a preparatory stage to beat the sea-water soaked bast. It was done with a round beater on a stone anvil. The second beating process was carried out with the squared beater and wooden anvil. The strips from the first beating was soaked again in the water and then beaten lightly to break up fibers. The craftmen laid a bundle of strips over the anvil and beat it into pieces of kapa. The second beater of Hawaii was the most characteristic one among bark cloth producing countries. On their surfaces were the engraved patterns, which were creation of theirs. These distinguished designs enabled them to produce the kapa with the thinner and finer texture and an elaboration of impressed designs known as "watermaks". The Hawaiian culture was self-sufficient one : Everything they used was of their own creation until 19th century. Among their inventions of printing designs on kapa are three most important and distinguished processes. They are the overlaying, the cord snapping and the block printing techniques. Their inventiveness as well as self sufficient environment made it possible to develop their fine art of the kapa making. It is said that the mass producing and cheap western technology of loom forced them to gradually abandon their traditional art and as a result this fine and valuable legacy of Hawaiian traditional kapa making technique is all but disappeared. However it is encouraging and heart warming to find that some of the people as well as specialized researchers pined together to form a group to try to reproduce the old kapa and study the traditional art. They consider the kapa as an expression of the ethnic identity with Hawaii's heritage as well as valuable art of human history.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.14 no.1
• /
• pp.366-381
• /
• 2020

Steganography has been successfully employed in various applications, e.g., copyright control of materials, smart identity cards, video error correction during transmission, etc. Deep learning-based steganography models can hide information adaptively through network learning, and they draw much more attention. However, the capacity, security, and robustness of the existing deep learning-based steganography models are still not fully satisfactory. In this paper, three models for different cases, i.e., a basic model, a secure model, a secure and robust model, have been proposed for different cases. In the basic model, the functions of high-capacity secret information hiding and extraction have been realized through an encoding network and a decoding network respectively. The high-capacity steganography is implemented by hiding a secret image into a carrier image having the same resolution with the help of concat operations, InceptionBlock and convolutional layers. Moreover, the secret image is hidden into the channel B of carrier image only to resolve the problem of color distortion. In the secure model, to enhance the security of the basic model, a steganalysis network has been added into the basic model to form an adversarial network. In the secure and robust model, an attack network has been inserted into the secure model to improve its robustness further. The experimental results have demonstrated that the proposed secure model and the secure and robust model have an overall better performance than some existing high-capacity deep learning-based steganography models. The secure model performs best in invisibility and security. The secure and robust model is the most robust against some attacks.