• 한국안전학회지
• /
• 제24권6호
• /
• pp.136-143
• /
• 2009

The injuries as a result of fall accidents is the one of the most common kind of injuries in Korea, especially fall from height is the top most common kind for fatal injuries. Futhermore, the number of fall injuries in manufacturing industry has been steadily increasing from 2000 to 2007. In 2007 the number of fall fatal injuries increased 10.6 % in comparison with the number in 2006. These numbers are 6~17 times higher than those for foreign countries such as the U.K and the USA. So, it is needed to make a study to reduce these numbers for manufacturing industry. To get the goals, we did research as followings. First, this study analyzed statistics by industry, by fall height, by common agent and so on to gain an insight into real aspect of fall injuries. It showed that ladder is the commonly cited agent for manufacturing industry, and 3 risky activities ; the ladder work, the load/unload work, and the maintenance work. Secondly, this study made a survey of manufacturing workers for their understandings of the most 3 risky activities. It showed that 'tendency to work easily' and 'difficulty of applying measures due to inherent working conditions' are main reasons for workers not to implement the preventive measures against the fall accidents. Thirdly, this study tested the slip characteristics of ladder base and lungs. The tests were done based on ANSI standard and KS. In addition to the standard condition, this study performed slip tests in wet and sandy conditions and compared the results with the those of standard condition. It showed that friction coefficient is standard condition > wet condition > sandy condition, and the friction coefficient of ladder for sandy condition is measured to be reduced by 63.9% compared with that for standard condition. Finally, this study developed safety work models for using of portable ladders in consideration of the safety standards of foreign countries such as the U.K, the USA, and the Australia.

• 융합정보논문지
• /
• 제11권9호
• /
• pp.17-27
• /
• 2021

본 연구에서는 고용허가제에 대한 이슈와 국민적 인식을 확인하고 정책을 제언하기 위해 소셜데이터를 기반으로 한 텍스트마이닝 기법을 활용하고자 하였다. 이를 위해 2020년 1월부터 2020년 12월까지 1년 동안 온라인상에서 '고용허가제'가 언급되는 6,217개의 문서의 텍스트 1,453,272개를 텍스톰(Textom)을 통해 수집하여 텍스트마이닝과 소셜네트워크 분석을 수행하였다. 데이터 상위 키워드 빈도, TF-IDF(Term Frequency - Inverse Document Frequency) 분석, 연결중심성 분석으로 언급량이 많은 키워드 100개를 도출하였으며, 일자리 문제, 정책과정의 중요성, 산업관점의 경쟁력, 외국인근로자 생활 개선을 주요한 키워드로 구성하였다. 또한, 의미연결망 분석을 통해 '고용정책'과 같은 주요인식과 '국제협력', '노동자 인권', '법률', '외국인 채용', '기업 경쟁력', '이주민 문화', '외국인력 관리'와 같은 주변인식을 파악하였다. 끝으로 고용허가제에 관한 정책 수립과 관련 연구를 진행하는데 있어서 고려해야 할 요소를 제안하였다.

• 한국안전학회지
• /
• 제35권3호
• /
• pp.105-115
• /
• 2020

This study compares the difference of fit factors (FF) and visual acuity according to masks and eyeglasses preferences for 54 participants. We the precautions and behaviors of discomfort when wearing masks of eyewear wearers. Contact lens discomfort and priority action of complaints was investigated Glasses fitting factors is Optical Center Height(OH), Vertex Distance(VD) and Pantoscopic Angle(PA). We measured those factors and expressed by the ratio of standard point and change point. Quantitative fit factor was measured by Portacount Pro+ 8038. Also, we selected to 6 exercises among 8 exercises OSHA QNFT (Quantitative Fit testing) protocol to measure the fit factors. The pass/ fail criterion of FF was set at 100. Visual acuity(VA) test chart is developed by Chunsuk Han was used, Descriptive statistics was performed. Descriptive statistics(SAS ver 9.2), it is used geometric means, Wilcoxon analysis(P=0.05) When wearing the mask preferentially, fit factor(FF) was high according to the step of glasses fitting parameter. on the other hand, when the glasses first choice, the visual acuity(VA) was high. there was no significant difference. In the case of fit factor (FF), mask first choice/ glasses first choice is OH (p=0.671/ p=0.332), VD (p=0.602/ p=0.571) and PA (p=0.549/ p=0.607). Visual acuity (VA), mask first choice/ glasses first choice is OH (p=0.753/ p=0.386), VD (p=0.815/ p=0.557) and PA (p=0.856/ p=0.562). The workers of workplace and office chose glasses but occupational health workers and students chose mask. In case of discomforts, it was suggested to remove the mask and tolerate discomforts. The main discomforts and usual action of lens were dryness, hyperemia, foreign body sensation, ophthalmodynia, decreased vision and glasses wearing. Therefore, it is necessary to develop a mask wearing method education program considering glasses fitting and develop a hybrid model that minimizes inconvenience when wearing glasses and a mask at the same time.

• Architectural research
• /
• 제7권2호
• /
• pp.91-96
• /
• 2005

The purpose of this study is to clarify the reality of labor and capital productivity in the construction industry through an industry-level approach and to analyze the relationship between labor and capital productivity using a Cobb-Douglas production function. According to the research results, the construction industry has shown a very high capital productivity, while labor productivity has kept up a low level during the 1980s and 1990s. The reason was because of the lack of skillful construction workers and the decrease of capital. Meanwhile, the construction productivity has greatly increased since 2000 when there was no change in wages. This was because of a large inflow of low-wage foreign workers while the amount of value added has dramatically increased due to the liberalized sale price of apartment buildings. According to the analysis by the Cobb-Douglas production function, the elasticity coefficient of V/L to K/L in the construction industry had decreased from 1.1663 in the $1^{st}$ period(1971-1988) to 0.4465 in the $2^{nd}$ period(1989-1997), and to 0.1664 in the $3^{rd}$ period(1998-2003). Such a result means that the allocation of labor has gradually increased while the allocation of capital has decreased. Moreover there was a big increase in allocation of labor after 1998 due to the excessive deterioration of capital. In conclusion, in order to raise the construction productivity and to avoid labor-intensive production methods, investment for capital should be more increased. In particular, new machinery and equipment that can actually substitute human labor in construction sites should be more developed and applied to construction sites.

• 대한교통학회지
• /
• 제17권2호
• /
• pp.7-19
• /
• 1999

본 연구의 목적은 통신업무(Telecommuting)의 교통대체에 대한 직·간접영향을 분석하는 것으로 통근통행을 중심으로 분석하였다. 이를 위하여 우선 국내외의 통신업무 실시사례와 특성을 분석하였다. 다음으로 실증분석을 위해 RP (Revealed Preference)와 SP(Stated Preference)조사를 실시하였다. RP조사는 응답자의 정보기술에 대한 인식과 직업특성, 교통이용특성 등을 조사하였고 SP조사는 어떠한 조건이 응답자로 하여금 통신 업무를 수행하도록 유도할 수 있는지에 대하여 조사하였다. 조사결과 고임금과 통신설비에 대한 보조가 통신업무로의 전환을 효과적으로 유도하는 것으로 나타났다. 서울시에 통신업무를 시행하였을 경우 49.1%의 근로자가 통신업무로 전환될 수 있는 것으로 나타났고, 이로 인한 교통대체효과는 연간 74조 4천억원의 직·간접교통 비용을 절감하는 것으로 분석되었다. 본 연구결과 통신업무는 교통혼잡을 효과적으로 감소시킬 수 있는 대안으로 판별되었다.

• 한국안전학회지
• /
• 제35권4호
• /
• pp.23-31
• /
• 2020

In the construction sector, there were 99 fatalities from falls associated with steel tube and system scaffolds for three years from 2016 to 2018 and out of which 27.3 percent (27 workers) were found to have occurred during installing and dismantling procedure. To erect scaffolding which is installed for the work at height, the work platforms are generally installed first and the safety guardrails are installed and vice versa to dismantle. As a result, workers are exposed to the risk of falling because they erect and dismantle scaffolding without guardrails. To minimize the risk of falling, it is necessary to study a new construction method that can erect or dismantle scaffolding while guardrails are installed (called advanced guardrail system). This study analyzed advanced guardrail system in terms of safety regulation, workability and economic efficiency by investigating the domestic situation on the use of scaffolding, reviewing domestic and foreign standards for guardrails and conducting economic feasibility study. The results of this study is expected to greatly contribute to preventing falls in scaffolding installation and dismantlement procedure. As a follow-up study, empirical research is required including physical test of scaffolding with advanced guardrail system and effectiveness analysis after trial applications.

• 노동경제논집
• /
• 제29권3호
• /
• pp.49-74
• /
• 2006

외환위기 이후 한국경제의 특징으로 전반적인 성장률 하락과 경기변동 단기화, 낮은 수준의 인플레이션을 꼽을 수 있다. 본 연구는 최근 저인플레이션 상황에서의 임금결정행태 변화에 초점을 맞추어 임금과 물가의 관계가 어떻게 변화하였는지 분석하였다. 1993~2005년 기간 중 단위노동비용과 소비자물가 자료에 기초하여 공적분 불안정성 (cointegration instability) 검정을 수행한 결과, 외환위기 및 물가안정목표제의 도입을 전후하여 두 변수가 서로 영향을 미치는 패턴이 변화한 것을 확인할 수 있었다. 외환위기 이전 기간에는 가격충격이 발생하는 경우 단기간에 임금수준에 반영되고, 임금충격은 장기적인 조정 과정을 통해 물가에 반영되는 비대칭적인 관계에 있었던 것으로 분석되었다. 또한, 실질임금은 장기적으로 일정수준을 유지하였다. 반면, 물가안정목표제의 도입 이후 기간에는 임금과 물가 두 변수간의 설명력이 낮아졌으며 임금-물가 악순환(wage-price spiral) 구조의 연결고리가 약화된 것이 물가안정의 중요한 요인이었음을 확인할 수 있었다.

• 한국의상디자인학회지
• /
• 제13권3호
• /
• pp.81-88
• /
• 2011

The survey was conducted with 143 companies related to textile and fashion industry in the northern region in Gyeonggi-do and the questionnaires from 126 companies were finally analyzed to get the statistic data. The questionnaire includes 19 questions and the survey was conducted from March to May 2010. In accordance with the analysis, the most urgent issue in the textile and fashion industry was the supply of manpower in the field. For the solution against the insufficiency of manpower, employment of foreigners showed the highest ratio, 47.4%. For the reasons why the number of foreign workers was increased, the insufficiency of the Korean workers showed the highest point, 62.9%. For the questions related to the conditions of regional industries, answered that the textile industry in the northern region in Gyeonggi-do would be very prospective as the future industry. There was a number of respondents who agreed that high-tech textile industry including knitting could be the industry creating the new highly added value. More than half of the respondents agreed that the textile industry contributed on strengthening the national competitiveness, boosting the development of national industry, helping the creating the jobs and dealing with the unemployment among young people. Accordingly, it was concluded that the perspective on the textile and fashion industry was positive.

• 한국농공학회지
• /
• 제25권4호
• /
• pp.38-49
• /
• 1983

This study was intended to develop a curriculum for the agricultural engineering technology, and that on confidence with junior college characteristics. In order to per- formance with this study, job cluster was analyzed on 28 parts in respect to the agricultural engineering field and questionnaire was investigated to the field including in alumni 181, students 537, professional workers 174 and professors 54. The results from the above analysis and investigation can be summarized as follows. 1. According to the investigation on degree of important subjects from the questionnaire, it is presented at mathematics 43%, physics 36% in students and 32%, 12% in professional workers. Considering from this results, it is desirable that primary subjects should be forced. 2. In comparing with fundamental major subjects and applied it, it is presented at that 41%, this 34%, in the total investigations. It can be found that in the degree of requirement, this is lower than that among the major subjects. 3. In investigation to the degree of requirement in the experiment and practice, it is presented at surveying 63%. Soil mechanics 14%, materials 13%, hydraulics 9% in order, in total inspection. 4. From investigation to the degree of requirement on the subjects of established newly, it is presented at majoring and living English 64%, E.D.P.S 30%, in the total questionnaire. Judging from the results, it seems that the foreign language is necessary to technician more and more, for advance to abroad. Also, it is no wonder that make good use of the E.D.P.S. 5 The table 5 is represented the model curriculum from the above results in anaized data on the questionnaire and the job cluster of table 2.

• 한국재난정보학회 논문집
• /
• 제8권3호
• /
• pp.242-257
• /
• 2012

우리나라의 인구변화의 양상은 사망률의 감소, 평균수명의 연장으로 고령화, 여성화 추세이며, 더불어 출산율의 저화와 고령화 인구의 비율이 더욱 증가되고 있다. 어려운 인력수급으로 건설노무자는 외국인에 의해 충원되고 있으며 미국, 유럽, 중국 등과 FTA의 체결로 노동집약적 산업이 쇠퇴하면 건설노무자의 일자리는 지속적으로 줄어들게 된다. 이것은 건설 기능인력의 부족현상과 기능 인력의 노무비 증가로 국가의 경제적 사회적 환경에 중대한 영향을 주어 건설업 생산성 저하의 주요 요인이 되고 있다. 따라서 이 연구는 건설업 생산성을 위해 최근 자료로부터 국내 건설경기 동향, 산업별 생산성 지수, 산업별 취업자 추이, 연령 계층별 기능인력 추이, 여성 기능 인력 추이, 노동시간 추이, 외국노동자 인력 추이, 건설업의 수주동향 분석, 업체규모별 수주동향, 건설경영분석지표로부터 노동생산성에 관한 종업원 1인당 부가가치 분석으로 건설업생산성 발전전망을 제시하였다.