• 한국생활과학회지
• /
• 제22권2호
• /
• pp.357-363
• /
• 2013

The purpose of this study is to suggest a new method to develop the apparel design applied construction of traditional swimsuit wearing Jeju woman divers known as Haenyeo. Jeju Haenyeos are represented as an image of the diligent and strong woman. With such an image, they have become the symbol of Jeju women. Furthermore, Jeju Haeyeo culture will be rebranded. The Jeju woman divers wear special swimsuit (Mul-sojungii) when harvesting the various sea products. The Mul-sojungii was buttoned down the right side so that it could be easily removed. Therefore, it is to review the fashion design products for effective item applied the original or modified folding technique of Mul-sojungii. As a result, it was to develop the bolero, jump suit and dress design of Korean image using folding technique(Guljapgi) of Mul-sojungii that is one of the unique, indigenous construction of Jeju.

• 대한전자공학회논문지SD
• /
• 제41권11호
• /
• pp.35-42
• /
• 2004

본 논문에서는 저 전력, 고속 동작을 위하여 트랜지스터 차동쌍 폴딩 회로를 사용하는 CMOS 폴딩 ADC를 설계하였다. 본 논문에서는 제안한 트랜지스터 차동쌍 폴딩 회로에 대한 동작원리와 기존의 폴딩 회로에 비해 어떤 장점을 가지고 있는지 설명한다. 이 회로를 적용하여 설계한 ADC에서는 폴딩신호를 처리하기 위하여 16 개의 정밀한 전압비교기와 32 개의 인터폴레이션 저항을 사용하므로 저 전력, 고속동작이 가능하고, 작은 칩 면적으로 제작할 수 있다. 설계공정은 0.25㎛ double-poly 2metal n-well CMOS 공정을 사용하였다. 모의실험결과 2.5V 전원전압을 인가하고 250MHz의 클럭 주파수에서 45mW의 전력을 소비하였으며 측정값을 통하여 계산된 INL은 ±0.15LSB, DNL은 ±0.15LSB, SNDR은 10MHz 입력신호에서 50dB로 측정되었다.

• 대한전자공학회논문지SD
• /
• 제43권8호
• /
• pp.19-26
• /
• 2006

본 논문에서는, 1.8V 6-bit 100MSPS CMOS A/D 변환기를 제안한다. 제안하는 A/D 변환기는 저 전력소모를 위해 폴딩 구조의 A/D 변환기로 구현되었으며, 특히 전압구동 인터폴레이션 기법을 사용하여 전력소모를 최소화하였다. 또한 전체 A/D 변환기의 전력소모 감소를 위해 새로운 폴더 감소회로를 제안하여 기존의 폴딩 A/D 변환기에 비해 폴더 및 프리앰프 수를 절반으로 줄였고, 새로운 프리앰프 평균화 기법을 제안하여 전체 A/D 변환기의 성능을 향상시켰다. 설계된 A/D 변환기는 100MSPS의 변환속도에서 50MHz의 ERBW를 가지며, 이때의 전력소모는 4.38mW로 나타난다. 또한 측정결과 FoM은 0.93pJ/convstep의 우수한 성능 지표를 갖으며, INL 및 DNL은 각각 ${\pm}0.5 LSB$ 이내의 측정결과를 보였다. 제안하는 A/D 변환기는 0.18um CMOS공정으로 제작되었고 유효 칩 면적은 $0.28mm^2$ 이다.

• BMB Reports
• /
• 제41권2호
• /
• pp.126-131
• /
• 2008

The folding of aptamer immobilized on an Au electrode was successfully detected using label-free electrochemical methods. A thrombin binding DNA aptamer was used as a model system in the presence of various monovalent cations. Impedance spectra showed that the extent to which monovalent cations assist in folding of aptamer is ordered as $K^+$ > $NH_4^+$ > $Na^+$ > $Cs^+$. Our XPS analysis also showed that $K^+$ and $NH_4^+$ caused a conformational change of the aptamer in which it forms a stable complex with these monovalent ions. Impedance results for the interaction between aptamer and thrombin indicated that thrombin interacts more with folded aptamer than with unfolded aptamer. The EQCM technique provided a quantitative analysis of these results. In particular, the present impedance results showed that thrombin participates a folding of aptamer to some extent, and XPS analysis confirmed that thrombin stabilizes and induces the folding of aptamer.

• 소성∙가공
• /
• 제11권3호
• /
• pp.231-237
• /
• 2002

The manufacturing of a metal bellows consists of the four main forming processes; deep-drawing, ironing, tube bulging and folding. Among these, the bulging and folding processes are critically important because the quality of metal bellows is greatly influenced by the forming conditions of these processes. In the present study, the finite element analysis technique is applied to the bulging and folding processes. The springback analysis is also called out. From the analysis results, it has been revealed that around the crown point the stress state is in one-directional tension and one-directional bending mode. Meanwhile, around the inner point of metal bellows it is in two-directional bending mode. It has also revealed that the thickness of metal bellows around the crown point is nearly uniform.

• 소성∙가공
• /
• 제19권2호
• /
• pp.88-94
• /
• 2010

The next generation of diesel engine can operate at high injection pressure up to 1,800bar. The common rail pipe must have higher internal strength because it is directly influenced by the high-pressure fuel. Folding defects in the Common rail pipe can not ensure the structural safety. Therefore, Preform design and fatigue-life analysis are very important for preventing the head of the common rail pipe from folding in the heading process and for predicting fatigue life according to the amount of folding. In this study, a closed form equation to predict fatigue life was suggested by Goodman theory and pressure vessels theory in ASME Code in order to develop an optimization technique of the heading process and verified its reliability through fatigue-structural coupled field analysis. The results calculated by the theory were in good agreement with those obtained by the finite element analysis.

• 대기
• /
• 제27권2호
• /
• pp.119-131
• /
• 2017

We present and discuss the Tropopause Folding Turbulence Detection (TFTD) algorithm for the Korean Communication, Ocean, Meteorological Satellite (COMS) which is originally developed for the Tropopause Folding Turbulence Product (TFTP) from the Geostationary Operational Environmental Satellite (GOES)-R. The TFTD algorithm assumes that the tropopause folding is linked to the Clear Air Turbulence (CAT), and thereby the tropopause folding areas are detected from the rapid spatial gradients of the upper tropospheric specific humidity. The Layer Averaged Specific Humidity (LASH) is used to represent the upper tropospheric specific humidity calculated using COMS $6.7{\mu}m$ water vapor channel and ERA-interim reanalysis temperature at 300, 400, and 500 hPa. The comparison of LASH with the numerical model specific humidity shows a strong negative correlation of 80% or more. We apply the single threshold, which is determined from sensitivity analysis, for cloud-clearing to overcome strong gradient of LASH at the edge of clouds. The tropopause break lines are detected from the location of strong LASH-gradient using the Canny edge detection based on the image processing technique. The tropopause folding area is defined by expanding the break lines by 2-degree positive gradient direction. The validations of COMS TFTD is performed with Pilot Reports (PIREPs) filtered out Convective Induced Turbulence (CIT) from Dec 2013 to Nov 2014 over the South Korea. The score test shows 0.49 PODy (Probability of Detection 'Yes') and 0.64 PODn (Probability of Detection 'No'). Low POD results from various kinds of CAT reported from PIREPs and the characteristics of high sensitivity in edge detection algorithm.

• 대한전자공학회논문지SD
• /
• 제44권11호
• /
• pp.74-81
• /
• 2007

본 논문에서는, 1.8V 6-bit 1GSPS CMOS A/D 변환기를 제안한다. 제안하는 A/D 변환기는 저 전력소모를 위해 폴딩 구조의 A/D 변환기로 구현되었으며, 특히 전압구동 인터폴레이션 기법을 사용하여 전력소모를 최소화 하였다. 또한 전체 A/D 변환기의 전력소모 감소를 위해 새로운 폴더 감소회로를 제안하여 기존의 폴딩 A/D 변환기에 비해 폴더 및 프리앰프 수를 절반으로 줄였고, 새로운 프리앰프 평균화 기법과 폴딩에 적합한 레이아웃 기법을 제안하여 전체 A/D 변환기의 성능을 향상시켰다. 설계된 A/D 변환기는 1GSPS의 변환속도에서 500MHz의 ERBW를 가지며, 이때의 전력소모는 60mW이였다. 측정결과 INL은 $\pm$0.5 LSB, DNL은 $\pm$0.7 LSB 이내의 정적 특성을 보였으며 Fin=100MHz의 샘플링 300MHz에서 SNR=34.1dB의 동적 특성을 나타내었다. 제안하는 A/D 변환기는 0.18um CMOS공정으로 제작되었으며 ADC 코어의 유효 칩 면적은 $0.27mm^2$ 이다.

• 공학교육연구
• /
• 제22권5호
• /
• pp.49-55
• /
• 2019

Folded structure is widely applied in various engineering fields. Many of the Japanese folding fans in the Edo era (1603-1868) have been successfully blended with the processing technology of "natural materials" that is the origin of Japan's "Monodzukuri" (craftsmanship) and its application "artistic originality". The charm of a fan lies in the diversity of stereoscopic expression not born in plane representation. For example, the effects of folds, the expression of the front and back sides flowing from the front to the back by double-sided description, and the two-layer effect of raising the backside from the surface using the permeability of Japanese paper, the calculated depiction are also seen. Moreover, by handling the fan, it also produced an illusion effect which skillfully calculated the change due to movement of the viewpoint. Students experience the natural materials such as Japanese paper, bamboo and starch paste, which are the materials of paint and fan at the time, and processing method, and know the difference with the current one. This study is to verify the effectiveness of engineering education which gains experience by making concrete fans and to understand deeply this traditional technology with the artistry of a Japanese fan at the same time. And we can learn from the characteristics of the fan to Japan's history and culture.

• 한국생물정보학회:학술대회논문집
• /
• 한국생물정보시스템생물학회 2000년도 International Symposium on Bioinformatics
• /
• pp.86-87
• /
• 2000

Protein folding is a fundamental problem in structural bioinformatics and so numerous studies have been devoted to the subject. As the most common regular secondary conformation in proteins, helix has been an important ingredient of the protein folding problem. In particular, alanine based polypeptides are widely studied to identify the helix folding process in that the aianine amino acid is known to have one of the highest helix propensities. In principle, intrinsic helix propensities can be obtained from gas-phase measurements where solvent effect is absent. Hudgins et al. studied alanine-based peptides in vacuo using high-resolution ion mobility measurement technique. It was reported that introduction of a single Iysine at the C terminus resulted in the formation of very stable, monomeric polyalanine helices. We also have investigated helix formation in vacuo with different terminal charge conditions; we have found a new type of helix motif, To the best of our knowledge, this type of helix conformation has not been characterized before and we name it as I-helix.