• Journal of Korea Water Resources Association
• /
• v.46 no.2
• /
• pp.139-153
• /
• 2013

For analyzing shallow-water flows over the uneven bottom, the HLLL scheme and the divergence form for bed slope source term (DFB) technique, respectively were applied to the flux gradient and the bottom gradient source terms in a finite-volume model for the shallow water equations. And also the model incorporated the volume/free-surface relationship (VFR) to consider the partially submerged cells (PSC). It was identified that a simpler version of the weighted surface-depth gradient method in the MUSCL was equivalent to the original one in the accuracy for 1D steady flows. It was verified that the flux gradient term and the bottom gradient source term were well-balanced exactly by the VFR for the 1D PSC. The VFR for the triangular PSC settled the problem which the governing equations were not well-balanced by the DFB technique for the 2D PSC. There were good agreements in simulations and experiments for 2D dam-break flows over a triangular sill and a round bump. In addition, the partial dam-break flow was successfully simulated for flooding of roughnesses in an irregular bottom as well as a sloping one. Therefore, this model is expected to be applied to the real river with uneven topography.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.12 no.10
• /
• pp.1890-1896
• /
• 2008

In this paper, the Si vertical Hall devices ale fabricated by using standard bipolar process and investigated in terms of the opeating and noise properties. The sensitivity of device with P+ isolation dam(type B) has been increased up to about 1.2 times compared to that device without the dam also noise has been increased. With the condition of f=I[KHz], band-width 1[Hz], the resolution of magnetic-field detection were about $0.97[{\mu}T]$/ type B and $1.25[{\mu}T]$/ type A, respectively, thus we must consider correlation the low noise or good resolution and high sensitivity in the situation for device geometry design or even for the materials.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.29 no.2B
• /
• pp.121-129
• /
• 2009

In this study, dam-break flows are simulated numerically by using an efficient and accurate Cartesian cut-cell mesh system. In the system, most of the computational domain is discretized by the Cartesian mesh, while peculiar grids are done by a cutcell mesh system. The governing equations are then solved by the finite volume method. An HLLC approximate Riemann solver and TVD-WAF method are employed to calculation of advection flux of the shallow-water equations. To validate the numerical model, the model is applied to some problems such as a steady flow convergence on an ideal bed, a steady flow over an irregular bathymetry, and a rectangular tank problem. The present model is finally applied to a simulation of dam-break flow on an experimental channel. The predicted water surface elevations are compared with available laboratory measurements. A very reasonable agreement is observed.

• Journal of Korea Water Resources Association
• /
• v.36 no.5
• /
• pp.777-785
• /
• 2003

A numerical model for the solution of two-dimensional free surface flow is developed on unstructured grid. By using fractional step method, the two-dimensional shallow water equations (SWE) are treated as two one-dimensional problems. Thus, it is possible to simulate computational hydraulic problems with higher computational efficiency. The one-dimensional problems are solved using upwind TVD version of second-order Weighted Averaged Flux (WAF) scheme with HLLC approximate Riemann solver. The numerical oscillations which are common with second-order numerical scheme are controlled by exploiting WAF flux limiter, Some idealized test problems are solved using this model and very accurate and stable solutions are obtained. It can be concluded as an efficient implement for the computation of SWE including dam break problems that concerning discontinuities, subcritical and supercritical flows and complex domain.

• Journal of Korean Society of Environmental Engineers
• /
• v.31 no.8
• /
• pp.635-640
• /
• 2009

After 1960s, in accordance with getting bigger in changing range of annual rain precipitation, those dams were built in order to prevent any drought and flood through the regulation of flux. In case of such dam, when it reaches to some definite pondage, for its regulation of water volume, numerous volume of water in the reservoir should be discharged by opening the floodgate, at this time a severe damage can be occurred to those lives and properties of the residents and tourists at the river or riverside. Accordingly, despite the sounding alarm broadcasting for prevention and notice such damage could be clearly travelled to those people without influence by the discharging noise or other neighboring environmental factor, since it was only empirically installed without any peculiar research until now, the alarm broadcasting could not effectively travel, and the travelling distance also could not known correctly. On such point of view, this Study has ever grasped the characteristics by frequencies and its sound pressure level about the discharge noise and the alarm broadcasting of Daechung Dam, one of multipurpose dams through the measurement and analysis by distances, and based on this, also has ever presupposed the proper location of additional alarm broadcasting spot using a simulation program named Cadna-A.

• Journal of Korean Society of Water and Wastewater
• /
• v.7 no.2
• /
• pp.1-8
• /
• 1993

Constant rate permeat experiments using polyethylene hollow fiber membranes were conducted in order to treat dam water for potable purposes. The experiments consisted of two series. One series consisted of six bench scale apparatuses, each having a $0.4m^2$ nominal permeat area, which were applied in determining the optimum operating conditions. The other series was comprised of two pilot scale plant, each having a $40m^2$ nominal permeat area. Both series were operated for six months. Coagulant was not used in any of the experiments. To suppress an increase in differential pressure between the inlet and outlet of the membrane, a hydrophilic membrane was found to be better than a hydrophobic membrane. Also, permeat flux should not be more than 0.03m/h, and air bubbling-washing for 1 minute should be conducted at 180 minutes intervals or less.

• Journal of Korea Water Resources Association
• /
• v.34 no.2
• /
• pp.187-195
• /
• 2001

In this study, a numerical model describing the shallow-water equations is newly developed by using a TVD scheme. The model has a second-order accuracy in time and space and is free from nonphysical oscillations, even in the vicinity of large gradients. Because a upwind based TVD scheme requires a Riemann solver, the HLLC scheme is employed in this model. To calibrate the applicability and accuracy, the developed model is used to simulate dam-break waves in an ideal channel and a sloshing flow n a paraboloidal basin. Agreements between numerical predictions and analytical solutions are very resonable.

• Journal of Korea Water Resources Association
• /
• v.55 no.10
• /
• pp.785-799
• /
• 2022

The aim of this study was to characterize the emission pathways and the footprint of greenhouse gases (GHG) in Daecheong Reservoir using the G-res Tool, and to evaluate the GHG emission intensity (EI) compared to other energy sources. In addition, the change in GHG emissions was assessed in response to the total phosphorus (TP) concentration. The GHG flux in post-impoundment was found to be 262 gCO₂eq/m²/yr, of which CO₂ and CH₄ were 45.7% and 54.2%, respectively. Diffusion of CO₂ contributed the most, followed by diffusion, degassing, and bubbling of CH₄. The net GHG flux increased to 510 gCO₂eq/m²/yr because the forest (as CO₂ sink) was lost after dam construction. The EI of Daecheong Reservoir was 86.8 gCO₂eq/kWh, which is 3.7 times higher than the global EI of hydroelectric power, due to its low power density. However, it was remarkable to highlight the value to be 9.5 times less than that of coal, a fossil fuel. We also found that a decrease in TP concentration in the reservoir leads to a decrease in GHG emissions. The results can be used to improve understanding of the GHG emission characteristics and to reduce uncertainty of the national GHG inventory of dam reservoirs.

• Journal of Korea Water Resources Association
• /
• v.57 no.2
• /
• pp.139-150
• /
• 2024

This study introduced a method of estimating water surface evaporation using the physical-based Penman combination equation (PCE) and the Penman wind function (PWF). A set of regression parameters in the PCE and PWF models were optimized by using the observed evaporation data for the period 2016-2017 in the Yongdam Dam watershed, and their effectiveness was explored. The estimated evaporation over the Deokyu Mountain flux tower demonstrated that the PWF method appears to have more improved results in terms of correlation, but both methods showed overestimation. Further, the PWF method was applied to the observed hydro-meteorological data on the surface of Yongdam Lake. The PWF method outperformed the PCE in the estimation of water surface evaporation in terms of goodness-of-fit measure and visual evaluation. Future studies will focus on a regionalization process which can be effective in estimating water surface evaporation for the ungauged area by linking hydrometeorological characteristics and regression parameters.

• Journal of Korea Water Resources Association
• /
• v.44 no.2
• /
• pp.109-123
• /
• 2011

In this study, 2D finite volume model, which can apply to the mixed meshes that is effective to treat the complicated topography such as a natural river, is developed. To do so, an algorithm for finding the neighbouring cell of a computational cell is introduced, and fluxes are computed using the HLLC approximate Riemann solver at each interface between a computational cell and it's neighbouring cells. Moreover, in order to numerically treat the bed slope which has important effect on the balance between flux gradients and sourte terms, different formula to compute the bed slope for rectangular and triangular mesh are applied. The developed model is applied to analyze dam-break in an experimental channel with $90^{\circ}$ bend and Malpasset dam-break in France. The two cases consist of mixed meshes and the suggested method is validated for the experimental channel and natural channel by comparison with the experimental data, field data and computed results.