• 한국소음진동공학회논문집
• /
• 제17권9호
• /
• pp.797-804
• /
• 2007

A study was carried out to investigate the fluid-structure interaction phenomena of buried hydrophone system that exposed complex loads due to handling, transportation and installation. The buried hydrophone system has necessarily neighborhood structures for installation. Because of the neighborhood structure, acoustic field is deformed. We analyze the piezoelectric-structural-acoustic coupled problem and the results to use a finite element analysis software, ANSYS, which has an coupled field analysis capability. The effect of the component of hydrophone system is revealed altogether in pressure distribution. So, we classify and analyze the problem by four different compositions for decomposition.

• 대한기계학회논문집B
• /
• 제38권6호
• /
• pp.547-556
• /
• 2014

본 논문에서는 15,000 마력급 원심식 압축기 임펠러 블레이드에 대한 단방향 유체-구조 연성해석 및 응답표면법을 이용한 형상최적설계를 제시하였다. 임펠러 블레이드의 형상은 공력 성능에 영향을 미칠 뿐만 아니라, 유체의 압력과 원심력에 의한 임펠러의 구조적 안전성에도 큰 영향을 미치므로 유체-구조 연성해석을 함께 고려한 형상최적설계가 필요한 분야이다. 본 논문에서 유체-구조 연성해석의 유체영역과 구조영역을 ANSYS CFX와 Mechanical을 사용하여 각각 해석하였다. 실험계획법을 기반으로 유체 및 구조해석 결과에 대한 응답표면을 생성하여 구조적 안전성 및 압축비를 제한조건으로 하고 임펠러의 효율을 최대화하는 임펠러 블레이드의 형상최적설계를 수행하였다.

• 한국가스학회지
• /
• 제24권3호
• /
• pp.47-53
• /
• 2020

본 연구에서는 엔진발전기에 사용되는 냉각팬 형상을 단방향 유동-구조 연성해석을 통하여 냉각팬의 성능과 내구성을 분석하여 최적화 설계자료를 제시하였다. 이를 위해, 냉각팬 내부 유동장에 대해 정상상태 해석을 수행하고, 정상상태 계산 결과를 구조해석을 위한 입력 데이터로 사용함으로써 내구성을 분석하였다. 냉각팬의 블레이드와 스윕 각도를 변경하는 작업을 통해 6가지 type을 모델링하여 유동해석을 진행하였으며, 질량유량과 토오크의 비는 A type이 가장 우수하지만, 질량유량이 상대적으로 큰 B type이 유동성능이 가장 좋은 냉각팬의 형상이라고 판단하였다. 유동해석을 통해 선정된 B type의 블레이드 두께를 4가지로 설정하여 구조해석을 검토한 결과, 피로안전계수까지 고려하였을 때 B Type-3가 가장 적합하다고 판단되었다.

• Structural Engineering and Mechanics
• /
• 제6권6호
• /
• pp.613-632
• /
• 1998

A coupling system for a structure accelerating through a fluid is considered which is composed of the structure and the fluid in a finite surrounding volume. Based on the variational principle, the finite element equations of hydrodynamic pressure and structural elastic vibration are deduced. A numerical method is given for the dynamic character and response of the structure which takes the coupled fluid into account. The effect of axial inertial forces on the dynamic character and response of rapidly accelerating structures is also considered.

• 한국항공우주학회지
• /
• 제36권6호
• /
• pp.532-540
• /
• 2008

최근 구조변형을 고려한 항공기의 공력특성을 계산하는데 필요한 CFD와 CSD 기법이 연계된 FSI 시스템에 관한 관심이 증대하고 있다. 본 연구에서는 유체유발 구조 변형을 고려한 수렴된 구조형상에 대한 공력특성 예측을 위해 유체-구조 연계 시스템인 FSI(Fluid- Structure Interaction)를 구축하였다. 각 모듈의 연계, 특히 CSD와 CFD의 결합 및 변형된 형상에 대한 공력격자 재생성을 위해 VSI(Volume Spline Interpolation)와 격자 변형 코드를 개발하였으며, 공력과 구조의 해석 모듈로 상용 프로그램인 FLUENT와 NASTRAN을 사용하였다. 구축된 시스템을 DLR-F4 날개에 적용하여 정적 유체-구조 연구를 수행하였으며, 그 결과 마하수 0.75에서 변형된 형상에 대한 양력 및 항력 계수는 약 20.26%, 18.5% 감소하는 것으로 나타났다.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2010년 춘계학술대회논문집
• /
• pp.83-85
• /
• 2010

A hydraulic gear pump is widely used in many industrial applications to provide both high pressure and high flow rate by physical displacement of finite volume of fluid with each revolution. In this study, two dimensional fluid-structure interaction simulation of gear pump flow was carried out to examine detailed complex flow patterns and structural stress distribution on rotors by using a commercial software ADINA. The effect of rotor clearance size on the flow characteristics, specially the temporal variation of velocity and pressure field, which is a main source of flow noise, also was investigated.

• Journal of Advanced Marine Engineering and Technology
• /
• 제37권4호
• /
• pp.344-350
• /
• 2013

본 연구는 200 W급 자이로밀형 수직축 풍력터빈 로터 블레이드 형상에 대한 구조 안정성을 평가하기 위하여 단방향 유체-구조 연성 해석 기법(FSI: Fluid-Structure Interaction)을 적용한 구조해석을 수행하였다. 설계된 수치해석 모델에 대한 3차원 모델링 형상 데이터를 이용하여 격자를 생성하고, 풍력터빈 유동장에 대한 유동해석을 수행하여 구해진 압력데이터를 구조해석 모델에 맵핑한 후 단방향 유체-구조 연성 해석을 수행하였다. 단방향 유체-구조 연성 해석에서 평가되는 최대응력과 각 물성데이터의 항복강도기준으로 안정성을 평가하였다. 유동해석은 정격풍속 10 m/s와 극한 풍속 60 m/s에 대하여 수행하였다. 구조해석 결과로 최대변형량은 블레이드 상부 끝단 측면에서 나타나며, 최대등가응력은 블레이드 외면과 내부 보강재 부분, 스트럿 부분에서 나타나지만, 재료의 항복강도와 최대등가응력 비교시 안전율이 2.21이므로 구조적으로 안전함을 확인하였다.

• International Journal of Fluid Machinery and Systems
• /
• 제2권4호
• /
• pp.303-314
• /
• 2009

The present paper shows the results of numerical and experimental modal analyses of Francis runners, which were executed in air and in still water. In its first part this paper is focused on the numerical prediction of the model parameters by means of FEM and the validation of the FEM method. Influences of different geometries on modal parameters and frequency reduction ratio (FRR), which is the ratio of the natural frequencies in water and the corresponding natural frequencies in air, are investigated for two different runners, one prototype and one model runner. The results of the analyses indicate very good agreement between experiment and simulation. Particularly the frequency reduction ratios derived from simulation are found to agree very well with the values derived from experiment. In order to identify sensitivity of the structural properties several parameters such as material properties, different model scale and different hub geometries are numerically investigated. In its second part, a harmonic response analysis is shown for a Francis runner by applying the time dependent pressure distribution resulting from an unsteady CFD simulation to the mechanical structure. Thus, the data gained by modern CFD simulation are being fully utilized for the structural design based on life time analysis. With this new approach a more precise prediction of turbine loading and its effect on turbine life cycle is possible allowing better turbine designs to be developed.

• Structural Engineering and Mechanics
• /
• 제82권3호
• /
• pp.355-367
• /
• 2022

The effect of hydrodynamic damping on intake tower is twofold: one is fluid damping and another is structural damping. Fluid damping can be derived analytically from the governing equation of the fluid-structure-interaction (FSI) problem which yields a very complicated solution. To avoid the complexity of the FSI problem water-tower system can be simplified by considering water as added mass. However, in such a system a reconsideration of structural damping is required. This study investigates the effects of this damping on the dynamic response of the intake tower, where, apart from the "no water (NW)" condition, six other cases have been adopted depending on water height. Two different cross-sections of the tower are considered and also two different damping properties have been used for each case as well. Dynamic analysis has been carried out using horizontal ground motion as input. Finally, the result shows how hydrodynamic damping affects the dynamic behavior of an intake tower with the change of water height and cross-section. This research will help a designer to consider more conservative damping properties of intake tower which might vary depending on the shape of the tower and height of water.

• 한국생산제조학회지
• /
• 제23권2호
• /
• pp.103-108
• /
• 2014

Growing concerns about environmental pollution have led to an increase in the demand for compressed natural gas (CNG) vehicles in recent years. CNG vehicles are equipped with a cylinder valve installed in a high-pressure vessel to control the CNG flow. The cylinder valve must meet high quality safety standards because the pressure vessel stores high-pressure CNG. Therefore, safety evaluation of the cylinder valve is necessary to ensure the safety of CNG vehicles. In this study, fluid-structure interaction analysis for the structural integrity of the cylinder valve were conducted using a commercial finite element analysis code(ANSYS WORKBENCH V14). The CFD analysis was performed using a steady-state technique according to the inlet and outlet pressures in order to predict the pressure distribution. Structural analysis was performed by a static structure technique at the maximum working pressure to evaluate the structural integrity of the cylinder valve. From the results, the safety factor of the valve component is between 1.57 and 21.5.