• 한국재료학회지
• /
• 제32권4호
• /
• pp.230-236
• /
• 2022

The formation behavior of a passive state film on the surface of STS304 in electrolytic solution was analyzed to determine its metallic ion composition. The properties of passive state films vary depending on the Fe and Cr ions in the electrolytic solution. It was observed that the passive state film surface became flat and glossy as the concentration of Fe and Cr ions in the electrolytic solution increased. The corrosion resistance property of the passive state film was proportional to the amount of Fe and Cr in the electrolytic solution. An initial passive state film with high Fe concentration was formed on the surface of STS304 during early electrolytic polishing. Osmotic pressure of Fe ions occurs between the passive state film and electrolytic solution due to the Fe ion concentration gradient. The Fe in the passive state film is dissolved into the electrolyte, and Cr fills up the Fe ion vacancies. As a result, a good corrosion-resistant floating film was formed. The more Fe ions in the electrolytic solution, the faster the film is formed, and as a result, a flat passive state film containing a large amount of Cr can be formed.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2016년도 제50회 동계 정기학술대회 초록집
• /
• pp.307.2-307.2
• /
• 2016

In this study, we synthesized Au nanoparticles (AuNPs) in polyacrylonitrile (PAN) thin films using a simple annealing process in the solid phase. The synthetic conditions were systematically controlled and optimized by varying the concentration of the Au salt solution and the annealing temperature. X-ray photoelectron spectroscopy (XPS) confirmed their chemical state, and transmission electron microscopy (TEM) verified the successful synthesis, size, and density of AuNPs. Au nanoparticles were generated from the thermal decomposition of the Au salt and stabilized during the cyclization of the PAN matrix. For actual device applications, previous synthetic techniques have required the synthesis of AuNPs in a liquid phase and an additional process to form the thin film layer, such as spin-coating, dip-coating, Langmuir-Blodgett, or high vacuum deposition. In contrast, our one-step synthesis could produce gold nanoparticles from the Au salt contained in a solid matrix with an easy heat treatment. The PAN:AuNPs composite was used as the charge trap layer of an organic nano-floating gate memory (ONFGM). The memory devices exhibited a high on/off ratio (over $10^6$), large hysteresis windows (76.7 V), and a stable endurance performance (>3000 cycles), indicating that our stabilized PAN:AuNPs composite film is a potential charge trap medium for next generation organic nano-floating gate memory transistors.

• 한국철도학회논문집
• /
• 제17권6호
• /
• pp.397-401
• /
• 2014

신개념의 해상 교통 인프라인 부유식 해중철도의 합리적인 설계를 위해서는 파랑 중에 해중철도 구조체에 가해지는 유체력을 추정하여야 한다. 간편하지만 정확도 높은 유체력 추정을 위해 유체동력학 이론을 이용한 계산식을 제안하고, 수조에서 상사 모형에 대해 실험을 수행하여 비교 평가하였다. Morison식과 선형 미소진폭 파이론을 이용하여 계산된 관성력과 항력은 모형 실험 결과를 통해 계측된 유체력과 양호한 일치를 얻었다. 해중철도 구조체에 작용하는 항력은 관성력에 비해 무시할 만한 수준이었고, 파력은 파수에 따라 큰 변동을 보이지 않으나 파고에는 선형적으로 비례함을 알 수 있었다. 선형 파이론과 Morison식은 해중철도 설계 시에 간편하고 유용하게 활용될 수 있음을 확인하였다.

• 대한조선학회논문집
• /
• 제41권4호
• /
• pp.45-52
• /
• 2004

Exact solution on the anti-symmetric response of ships having uniform sectional properties in waves is derived. Boundary value problem consisted of Timoshenko beam equation and free-free end condition is solved analytically. The responses are assumed as linear and wave loads are calculated by using strip method. Horizontal bending moment, shear force and torsional moment are calculated. The developed analysis model is used for the benchmark test of the numerical codes in this problem. Also the application on the preliminary design of barge-like ships and VLFS (Very Large Floating Structure) is expected

• 대한조선학회논문집
• /
• 제41권2호
• /
• pp.47-54
• /
• 2004

Exact solution on the vertical responses of ships having uniform sectional properties in waves is derived. Boundary value problem consisted of Timoshenko beam equation and free-free end condition is solved analytically. The responses are assumed as linear and wave loads are calculated by using strip method. Vertical bending moment, shear force and deflection are calculated. The developed analysis model is used for the benchmark test of the numerical codes in this problem. Also the application on the preliminary design of barge-like ships and VLFS (Very Large Floating Structure) is expected.

• Journal of Electrical Engineering and Technology
• /
• 제2권3호
• /
• pp.312-319
• /
• 2007

The solution of the power flow is one of the most important problems in electrical power systems. These traditional methods such as Gauss-Seidel method and Newton-Raphson (NR) method have had drawbacks up to now such as initial values, abnormal operating solutions and divergences in heavy loads. In order to overcome theses problems, the power flow solution incorporating genetic algorithm (GA) is introduced in this paper. General operator of genetic algorithm, arithmetic crossover, and non-uniform mutation operator of GA are suggested to solve the power flow problem. While abnormal solution cannot be obtained by a NR method, multiple power flow solution can be obtained by a GA method. With a heavy load, both normal solution and abnormal solution can be obtained by a proposed method. In this paper, a floating number representation instead of the binary number representation is introduced for accuracy. Simulation results have been compared with traditional methods.

• 한국경영과학회:학술대회논문집
• /
• 한국경영과학회 1993년도 추계학술대회발표논문집; 서강대학교, 서울; 25 Sep. 1993
• /
• pp.12-19
• /
• 1993

In general, the line balancing problem is defined as of finding an assignment of the given jobs to the workstations under the precedence constraints given to the set of jobs. Usually, the objective is either minimizing the cycle time under the given number of workstations or minimizing the number of workstations under the given cycle time. In this paper, we present a new type of an assembly line balancing problem which occurs in an electronics company manufacturing home appliances. The main difference of the problem compared to the general line balancing problem lies in the structure of the precedence given to the set of jobs. In the problem, the set of jobs is partitioned into two disjoint subjects. One is called the set of fixed jobs and the other, the set of floating jobs. The fixed jobs should be processed in the linear order and some pair of the jobs should not be assigned to the same workstations. Whereas, to each floating job, a set of ranges is given. The range is given in terms of two fixed jobs and it means that the floating job can be processed after the first job is processed and before the second job is processed. There can be more than one range associated to a floating job. We present a procedure to find an approximate solution to the problem. The procedure consists of two major parts. One is to find the assignment of the floating jobs under the given (feasible) assignment of the fixed jobs. The problem can be viewed as a constrained bin packing problem. The other is to find the assignment of the whole jobs under the given linear precedence on the set of the floating jobs. First problem is NP-hard and we devise a heuristic procedure to the problem based on the transportation problem and matching problem. The second problem can be solved in polynomial time by the shortest path method. The algorithm works in iterative manner. One step is composed of two phases. In the first phase, we solve the constrained bin packing problem. In the second phase, the shortest path problem is solved using the phase 1 result. The result of the phase 2 is used as an input to the phase 1 problem at the next step. We test the proposed algorithm on the set of real data found in the washing machine assembly line.

• 한국정보과학회논문지:시스템및이론
• /
• 제36권6호
• /
• pp.532-542
• /
• 2009

동적 온도 제어 기술은 마이크로프로세서 내부 특정 유닛의 온도가 크게 올라가는 열섬 문제를 해결하기 위해 널리 사용되는 기법으로 냉각 비용을 감소시키고 칩의 신뢰성을 높인다는 장점이 있지만, 기법 적용으로 인해 성능이 저하되는 단점이 있다. 본 논문에서는 부동소수점 응용 프로그램 수행 시 발열 문제를 해결하기 위해 적용되는 동적 온도 제어 기술로 인한 성능 저하를 최소화하기 위하여 듀얼 부동소수점 가산기 구조를 제안하고자 한다. 부동소수점 응용 프로그램을 수행할 때, 가장 많이 활성화되는 유닛 중 하나인 부동소수점 가산기를 두 개로 중복시켜서 접근을 분산시키는 기법을 통해 열섬 문제를 해결하고자 한다. 또한 상호 인접한 유닛 간의 열 전달로 인해 온도가 상승하는 문제를 해결하기 위하여, 열 진달 지연 공간을 마이크로프로세서 내에 배치시키는 방법을 제안한다 제안 기법들의 적용 결과, 동적 온도 관리 기술을 사용하는 환경에서 마이크로프로세서의 최고 온도가 평균 $5.3^{\circ}C$ 최대 $10.8^{\circ}C$ 낮아지면서 발열로 인한 칩의 안정성 저하 문제를 완화시킬 수 있다. 또한 동적 온도 관리 기술이 적용되는 시간을 크게 줄임으로써 프로세서의 성능은 평균 1.41배(최대 1.90배) 향상된다.

• 대한조선학회지
• /
• 제13권2호
• /
• pp.1-12
• /
• 1976

Linearized motions of as axisymmetrical dock freely floating in a regular plane wave are discussed. An extension of the Bessho variational principle(Bessho[3]) is derived to obtain a numerical procedure for a solution of the boundary value problem associated with the fluid motion. The added mass and the damping coefficients for a circular dock in vertical(heave) and horizontal(surge) oscillations are evaluated numerically, and the resulte seems to be satisfactory.

• 한국산학기술학회논문지
• /
• 제21권3호
• /
• pp.503-509
• /
• 2020

Semi-submergible, Tension-leg Platform 등과 같은 부유식 해양구조물에서 점성효과를 고려하여 항력에 기인한 점성 표류력를 구하는 것은 최근까지 잘 고려되지 않았던 설계 요소이다. 본 논문에서는 파랑과 조류를 고려한 부유식 수직 실린더 구조물에 작용하는 평균 점성 표류력에 대한 해석적 수식 해를 구하였다. 기존의 고정된 실린더에서 구한 방식과 같이 실린더의 수면 위로 나온 부분을 Splash Zone, 수면 아래의 잠긴 부분을 Submerged Zone 으로 구분하였다. 파랑이 존재하는 경우는 Splash zone 에서만 고려되고, 파랑과 조류를 포함한 경우는 Splash Zone 과 Submerged Zone 모두에서 각각 식을 구하였다. 기존 연구의 RAO 결과값을 활용하여 고정된 실린더에 작용하는 평균 점성 표류력의 계산 결과와 비교하였다. Splash Zone에서 파랑만 존재하는 경우를 제외하고 대부분의 주파수 영역 대에서 부유식 실린더에 작용하는 평균 점성 표류력의 크기가 상대적으로 고정된 실린더에 작용하는 표류력의 크기보다 크게 나오는 것을 볼 수 있으며, 특히 조류가 상대적으로 더 중요하게 고려되는 경우 더 크게 증가함을 알 수 있었다. 따라서, 본 연구 결과를 통해 부유식 해양 구조물 설계시 항력으로 인한 점성 표류력의 추론을 제시할 수 있다.