• 제목/요약/키워드: flexible printed circuit board (FPCB)

검색결과 44건 처리시간 0.03초

연성인쇄회로기판의 액중 레이저 절단 (Laser Cutting of Flexible Printed Circuit Board in Liquid)

  • 김택구;김주한
    • 한국생산제조학회지
    • /
    • 제22권1호
    • /
    • pp.56-62
    • /
    • 2013
  • The laser cutting process which is flexible and rapid usually provides a better result in cutting of flexible printed circuit boards (FPCB). However, circuit-short by the re-deposition of debris from laser ablation or its heat affect zone (HAZ) on the cutting surfaces can be a problem. A laser cutting process of FPCB in the presence of liquid can minimize these negative effects. The temperature distribution of copper and polymer parts of FPCB was analyzed with numerical simulation and the experimental results were presented to evaluate this process. Generally, laser cutting under liquid has advantages of less re-deposition of carbides and less HAZ on the cutting edges. However, bubble generation and laser beam control through the liquid media should be considered carefully to obtain a successful result.

연성 인쇄 회로 기판을 이용한 초고주파 MEMS 송신기 연구 (A RF MEMS Transmitter Based on Flexible Printed Circuit Boards)

  • 명성식;김선일;정주용;육종관
    • 한국전자파학회논문지
    • /
    • 제19권1호
    • /
    • pp.61-70
    • /
    • 2008
  • 본 논문에서는 멤스 기술의 하나인 연성 인쇄 회로 기판을 이용하여 임의의 형태로 변형이 가능한 초고주파 멤스 송신기를 제안하였다. 연성 인쇄 회로 기판은 그 무게가 가볍고 두께가 얇아 경량 소형화 모듈을 만드는데 유리한 장점이 있다. 또한, 연성 인쇄 회로 기판은 종이와 같이 유연한 특성을 가지고 있어 평면이 아닌 임의의 곡면 등에 실장할 수 있는 장정을 가지고 있다. 본 논문에서는 근거리 센서 네트워크 구성을 위한 직교 주파수 분할 다중 전송 방식을 위한 선형 무선 송신기를 설계 제작하였다. 송신 모듈의 능동 회로는 전력효율이 높고 선형성이 우수하여 전력 증폭기에 많이 사용되고 있는 InGaP/GaAs HBT 공정을 사용하여 설계 및 제작하였으며, 매칭 회로 및 필터 등의 수동 회로는 연성 인쇄 회로 기판에 직접 집적화 하여 제작하였다. 제작된 멤스 송신기는 EVM 특성을 통하여 시스템 성능을 분석하였다.

열압착법을 이용한 경.연성 인쇄회로기판 접합부의 접합 강도에 미치는 접합 조건의 영향 (Effects of Bonding Conditions on Joint Property between FPCB and RPCB using Thermo-Compression Bonding Method)

  • 이종근;고민관;이종범;노보인;윤정원;정승부
    • 마이크로전자및패키징학회지
    • /
    • 제18권2호
    • /
    • pp.63-67
    • /
    • 2011
  • 본 연구에서는 interlayer로 Sn을 사용하여 경성 인쇄 회로 기판(Rigid printed circuit board, RPCB)과 연성 인쇄 회로 기판(Flexible printed circuit board, FPCB) 간의 열압착 접합(Thermo-compression bonding) 조건을 최적화하는 연구를 진행하였다. 접합에 앞서 FPCB를 다양한 온도와 시간조건 하에서 Sn이 용융된 솔더 배스 안에서 침지(Dipping) 공정을 수행하였고, 열압착법을 이용하여 FPCB와 RPCB의 접합을 수행하였다. FPCB/RPCB 접합부의 접합 강도를 $90^{\circ}$ 필 테스트(Peel test)를 이용하여 측정하였다. 그 결과 $270^{\circ}C$, 1s의 침지 조건에서 FPCB의 polyimide(PI)와 Cu 전극 계면에서 파단되고, 이때, 최대 박리 강도를 얻었다. FPCB와 RPCB의 열압착 접합시 주요 변수로는 압력, 온도, 시간이 있으며, 특히 온도의 증가에 따라 접합 강도가 크게 증가하였다. 접합부 계면 관찰 결과, 접합 온도와 시간이 증가함에 따라 접합 면적이 증가하였으며, 이로 인해 접합 강도가 증가하는 것으로 사료된다. 필 테스트 과정에서 나타나는 F-x(Forcedisplacement) 곡선을 토대로 산출한 파괴 에너지와 접합 강도는 $280^{\circ}C$, 10s의 접합 조건에서 가장 높게 나타났으며, 이 조건이 최적 접합 조건으로 도출되었다.

열압착 접합 조건에 따른 경·연성 인쇄회로기판 간 Sn-58Bi 무연솔더 접합부의 기계적 특성 (Effects of Bonding Conditions on Mechanical Strength of Sn-58Bi Lead-Free Solder Joint using Thermo-compression Bonding Method)

  • 최지나;고민관;이상민;정승부
    • 마이크로전자및패키징학회지
    • /
    • 제20권2호
    • /
    • pp.17-22
    • /
    • 2013
  • 본 연구에서는 Sn-58Bi 솔더를 이용한 경성 인쇄 회로 기판 (Rigid printed circuit board, RPCB)과 연성 인쇄회로 기판 (Flexible printed circuit board, FPCB) 간의 열압착 접합 시, 접합 조건에 따른 기계적 특성에 대하여 연구하였다. 접합 온도와 접합 시간을 변수로 열압착 접합을 실시하여 $90^{\circ}$ 필 테스트(Peel test)를 통해 접합 강도를 측정하고, 단면과 파단면을 관찰하였다. 접합 온도가 증가할수록 접합 강도가 증가하였으며, 접합 시간에 따른 접합 강도의 변화 또한 관찰할 수 있었다. 접합 시간이 증가하면서 접합부의 파괴에 영향을 미치는 요인이 솔더 층에서 금속간 화합물(Intermetallic compound, IMC) 층으로 변화하는 것을 관찰할 수 있었다. 필 테스트 과정의 F-x(Force-distance) curve를 통해 파괴 에너지를 계산하여 금속간 화합물이 접합 강도에 미치는 영향을 평가하였으며, 본 연구에서 $195^{\circ}C$, 7초 조건이 접합 강도와 파괴 에너지가 가장 높게 나타나는 최적 접합 조건으로 도출되었다.

신축성 전자패키지용 강성도 국부변환 신축기판의 계면접착력 향상공정 (Interfacial Adhesion Enhancement Process of Local Stiffness-variant Stretchable Substrates for Stretchable Electronic Packages)

  • 박동현;오태성
    • 마이크로전자및패키징학회지
    • /
    • 제25권4호
    • /
    • pp.111-118
    • /
    • 2018
  • 강성도가 서로 다른 두 polydimethylsiloxane (PDMS) 탄성고분자와 flexible printed circuit board (FPCB)로 이루어진 soft PDMS/hard PDMS/FPCB 구조의 강성도 국부변환 신축기판을 개발하기 위해 PDMS와 FPCB를 acrylic-silicone 양면테이프를 사용하여 접합한 후 접합공정에 따른 PDMS/FPCB 계면접착력을 분석하였다. 완전 경화된 PDMS에 acrylic-silicone 양면테이프의 silicone 접착제로 접착한 FPCB의 pull 강도는 259 kPa이었으며, pull 시험시 PDMS와 silicone 접착제 사이에서 박리가 발생하였다. 반면에 $60^{\circ}C$에서 15~20분 유지하여 반경화시킨 PDMS에 acrylic-silicone 양면테이프의 silicone 접착제로 FPCB를 접착 후 $60^{\circ}C$에서 12시간 유지하여 PDMS를 완전 경화시키면 pull 강도가 1,007~1,094 kPa로 크게 향상되었으며, pull 시험시 계면 박리가 acrylic-silicone 양면테이프의 acrylic 접착제와 FPCB 사이에서 발생하였다.

Island-Bridge 구조의 강성도 경사형 신축 전자패키지의 유효 탄성계수 및 변형거동 분석 (Analysis on Effective Elastic Modulus and Deformation Behavior of a Stiffness-Gradient Stretchable Electronic Package with the Island-Bridge Structure)

  • 오태성
    • 마이크로전자및패키징학회지
    • /
    • 제26권4호
    • /
    • pp.39-46
    • /
    • 2019
  • Polydimethylsiloxane (PDMS)를 베이스 기판으로 사용하고 이보다 강성도가 높은 flexible printed circuit board (FPCB)를 island 기판으로 사용하여 island-bridge 구조의 soft PDMS/hard PDMS/FPCB 신축 패키지를 형성하고, 이의 유효 탄성계수와 변형거동을 분석하였다. 각기 탄성계수가 0.28 MPa, 1.74 MPa 및 1.85 GPa인 soft PDMS, hard PDMS, FPCB를 사용하여 형성한 soft PDMS/hard PDMS/FPCB 신축 패키지의 유효 탄성계수는 0.58 MPa로 분석되었다. Soft PDMS/hard PDMS/FPCB 신축 패키지에서 soft PDMS의 변형률이 0.3이 되도록 인장시 hard PDMS와 FPCB의 변형률은 각기 0.1과 0.003이었다.

소 동물 1H 1.5 T 자기공명영상 장치용 유연인쇄기판 기반 새장형 수신 코일 센서 (FPCB-based Birdcage-Type Receiving Coil Sensor for Small Animal 1H 1.5 T Magnetic Resonance Imaging System)

  • 세이크 파이잘 아마드;김현덕
    • 센서학회지
    • /
    • 제26권4호
    • /
    • pp.245-250
    • /
    • 2017
  • A novel method to implement a birdcage-type receiving coil sensor for use in a magnetic resonance imaging(MRI) system has been demonstrated employing a flexible printed circuit board (FPCB) fabrication technique. Unlike the conventional methods, the two-dimensional shape of the coil sensor is first implemented as a FPCB and then it is attached to the surface of a cylindrical supporting structure to implement the three-dimensional birdcage-type coil sensor. The proposed method is very effective to implement object-specific MRI coil sensors especially for small animal measurements in research and preclinical applications since the existing well-developed FPCB-based techniques can easily meet the requirements on accuracies and costs during coil implement process. The performances of the coil sensor verified through $^1H$ 1.5T MRI measurements for small animals and it showed excellent characteristics by providing a high spatial precision and a high signal-to-noise ratio.

휴대폰용 2중 대역 고효율 FPCB 안테나 (High Efficiency FPCB Antenna for the Dual Band Mobile Phone)

  • 서상혁;손태호;조영민
    • 한국전자파학회논문지
    • /
    • 제20권11호
    • /
    • pp.1194-1200
    • /
    • 2009
  • 1 cc 체적을 갖는 휴대폰 내장형 안테나를 FPCB(Flexible Printed Circuit Board)로 구현하였다. 안테나 전류의 방향이 가급적 일정하도록 설계함으로써 소형이지만 효율을 높여 이득을 증가시켰다. GSM 대역의 공진을 위한 짧은 길이의 보상은 맴돌이 인덕터를 FPCB상에 구현하여 보상하였다. 2개 맴돌이 인덕터를 적용하여 GSM 대역의 대역폭을 넓혔다. DCS 대역의 방사 소자는 FPCB와 수직인 형태의 도체 패턴을 부설하여 설계하였다. 비유전율 4.4를 갖는 두께 0.05 mm의 FPCB로 구현하고 길이$\times$$\times$높이=$30{\times}7{\times}5$ mm인 캐리어(carrier)에 부착하여 안테나를 제작하였다. 제작된 안테나를 측정한 결과, GSM 대역에서 VSWR 2:1 이하, 효율 42.49~60.95 % 및 평균 이득 -3.72~-2.15 dBi를 보였고, DCS 대역에서 VSWR 2:1 이하, 효율 47.95~73.21 % 및 평균 이득 -3.19~-1.35 dBi가 나타나 2대역 공히 우수한 특성을 보였다. 방사 패턴은 2대역 모두 H-면 전방향성 특성을 보였다.

A Cost-Effective 40-Gb/s ROSA Module Employing Compact TO-CAN Package

  • Kang, Sae-Kyoung;Lee, Joon Ki;Huh, Joon Young;Lee, Jyung Chan;Kim, Kwangjoon;Lee, Jonghyun
    • ETRI Journal
    • /
    • 제35권1호
    • /
    • pp.1-6
    • /
    • 2013
  • In this paper, we present an implemented serial 40-Gb/s receiver optical subassembly (ROSA) module by employing a proposed TO-CAN package and flexible printed circuit board (FPCB). The TO-CAN package employs an L-shaped metal support to provide a straight line signal path between the TO-CAN package and the FPCB. In addition, the FPCB incorporates a signal line with an open stub to alleviate signal distortion owing to an impedance mismatch generated from the soldering pad attached to the main circuit board. The receiver sensitivity of the ROSA module measures below -9 dBm for 40 Gb/s at an extinction ratio of 7 dB and a bit error rate of $10^{-12}$.

강성도 경사형 신축 전자패키지의 탄성특성 및 반복변형 신뢰성 (Elastic Properties and Repeated Deformation Reliabilities of Stiffness-Gradient Stretchable Electronic Packages)

  • 한기선;오태성
    • 마이크로전자및패키징학회지
    • /
    • 제26권4호
    • /
    • pp.55-62
    • /
    • 2019
  • Polydimethylsiloxane (PDMS)를 베이스 기판으로 사용하고 이보다 강성도가 높은 flexible printed circuit board (FPCB)를 island 기판으로 사용한 soft PDMS/hard PDMS/FPCB 구조의 강성도 경사형 신축패키지를 형성하고, 이의 탄성특성 및 인장 싸이클과 굽힘 싸이클에 따른 신뢰성을 분석하였다. Soft PDMS, hard PDMS, FPCB의 탄성계수가 각기 0.28 MPa, 1.74 MPa, 2.25 GPa일 때 soft PDMS/hard PDMS/FPCB 신축패키지의 유효 탄성계수는 0.6 MPa로 분석되었다. 0~0.3 범위의 인장 싸이클을 15,000회 인가시 신축패키지의 저항변화률은 2.8~4.3% 이었으며, 굽힘반경 25 mm의 굽힘 싸이클을 15,000회 인가시 저항변화률은 0.9~1.5% 이었다.