• 한국재료학회지
• /
• 제29권5호
• /
• pp.317-321
• /
• 2019

We investigated the characteristics of nano crystalline silicon(nc-Si) thin-film solar cells on graphite substrates. Amorphous silicon(a-Si) thin-film solar cells on graphite plates show low conversion efficiency due to high surface roughness, and many recombination by dangling bonds. In previous studies, we deposited barrier films by plasma enhanced chemical vapor deposition(PECVD) on graphite plate to reduce surface roughness and achieved ~7.8 % cell efficiency. In this study, we fabricated nc-Si thin film solar cell on graphite in order to increase the efficiency of solar cells. We achieved 8.45 % efficiency on graphite plate and applied this to nc-Si on graphite sheet for flexible solar cell applications. The characterization of the cell is performed with external quantum efficiency(EQE) and current density-voltage measurements(J-V). As a result, we obtain ~8.42 % cell efficiency in a flexible solar cell fabricated on a graphite sheet, which performance is similar to that of cells fabricated on graphite plates.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2011년도 추계학술대회 초록집
• /
• pp.85.1-85.1
• /
• 2011

In this study, Grafoil$^{TM}$ which has comparable electric resistance and chemical stability but is flexible, fragile, and cheap material was adopted as bipolar plates for proton exchange membrane fuel cell(PEMFC) having only one straight line flow channel. Because of its flexibility, pressurizations of cell with various pressures showed different operating characteristics compared to ordinary graphite-used PEMFC. While performances of both cells decreased as these were pressurized, investigation of ohmic and faradaic resistance by electrochemical impedance measurement indicated different tendency of change. Ohmic resistance of graphite-used cell increased with increasing pressure, which is reversed in Grafoil$^{TM}$-used cell. It is speculated that effective chemical reaction area is decreased with increasing pressure in case of graphite-used one, but because of flexible property of Grafoil$^{TM}$, gas diffusion layer in Grafoil$^{TM}$-used cell was well-activated. Different rate of change of faradaic resistances in both cells support this supposition. However, although optimum point of pressurization is found, it is required to investigate other operating conditions because of low performance compared to graphite-used cell.

• 한국분말재료학회지
• /
• 제28권1호
• /
• pp.13-19
• /
• 2021

Bulk graphite is manufactured using graphite scrap as the filler and phenolic resin as the binder. Graphite scrap, which is the by-product of processing the final graphite product, is pulverized and sieved by particle size. The relationship between the density and porosity is analyzed by measuring the mechanical properties of bulk graphite. The filler materials are sieved into mean particle sizes of 10.62, 23.38, 54.09, 84.29, and 126.64 ㎛. The bulk graphite density using the filler powder with a particle size of 54.09 ㎛ is 1.38 g/㎤, which is the highest value in this study. The compressive strength tends to increase as the bulk graphite density increases. The highest compressive strength of 43.14 MPa is achieved with the 54.09 ㎛ powder. The highest flexural strength of 23.08 MPa is achieved using the 10.62 ㎛ powder, having the smallest average particle size. The compressive strength is affected by the density of bulk graphite, and the flexural strength is affected by the filler particle size of bulk graphite.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2007년도 7th International Meeting on Information Display 제7권1호
• /
• pp.273-276
• /
• 2007

A natural graphite heat spreader increased the upper operating temperature limit of a CCFL backlit LCD television. A 0-80W heat source was used to simulate additional electronics. Without the heat spreader, internal circuitry shut-down at ${\sim}30;$ no shut-down occurred above 80W with a heat spreader. Additionally, brightness, temperature uniformity, and operating ranges were improved, verified by environmental chamber performance testing at various ambient conditions.

• 마이크로전자및패키징학회지
• /
• 제29권4호
• /
• pp.21-27
• /
• 2022

저렴한 전도성 흑연을 인쇄전자 공법으로 유연 압력 센서를 개발하였다. 유연 압력 센서는 의료, 게임, AI 등 미래 산업에 활용될 소재로 각광받고 있다. 유연 압력 센서용 인쇄전극을 다양한 전기-기계적 특성을 평가한 결과 최대인장률 20%, 30°의 인장/굽힘, 간이 맥박 시험에서 일정한 저항 변화율을 보였다. 이렇게 검증이 완료된 전극을 시뮬레이션하여 더 적합한 matrix 패턴을 설계하였다. Serpentine 패턴을 활용하여 matrix 패턴 제작과 인캡슐레이션을 동시에 진행할 수 있는 공정을 활용하였다. 인쇄된 흑연 전극의 한쪽 면에 접착력 증가를 위한 O₂ 플라즈마 표면처리하고, 90°회전시켜, 라미네이션 공정을 통해 2개의 전극을 하나로 제작하였다. 이렇게 제작된 matrix 패턴을 인체의 손목 맥박 위치에 부착하여 실측을 진행한 결과 남녀 상관없이 일정한 저항 변화율을 보였다.

• Carbon letters
• /
• 제10권4호
• /
• pp.335-338
• /
• 2009

In this work, the effect of co-carbon fillers on the electrical and mechanical properties of epoxy nanocomposites was investigated. The graphite nanosheets (GNs) and multi-walled carbon nanotubes (MWNTs) were used as co-carbon fillers. The results showed that the electrical conductivity of the epoxy nanocomposites showed a considerable increase upon an addition of MWNTs when GNs were fixed at 2 wt.%. This indicated that low content GNs formed the bulk conductive network and then MWNTs added were intercalated between the GN layers, resulted in the formation of additional conductive pathway. Furthermore, the flexural strength of the epoxy nanocomposites was enhanced with increasing the MWNT content. It was probably attributed to the flexible MWNTs compared with rigid GNs, resulted in the enhancement of the mechanical properties.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2011년도 춘계학술발표대회
• /
• pp.240.2-240.2
• /
• 2011

그라파이트 산화물(graphite oxide;G.O)는 그라파이트와는 다르게 물에서의 분산 능력이 뛰어나고 다양한 기판상에 단일 G.O layer를 형성할 수 있는 특성을 가지고 있으며, 유연(flexible)하고 투명(transparent)하기 때문에 다양한 전 자기 디바이스에 적용 가능하다. 특히, 최근 자성산화물 나노입자(magnetic oxide nanoparticles)에 대한 연구가 집중되고 있는데, 이러한 자성 나노입자와 G.O와의 복합체에 대한 연구는 다양한 분야로의 적용성에 대한 새로운 길을 열어주고 있다. 본 연구에서는 화학적 처리법을 적용하여 자성 나노입자(Co 나노입자)와 G.O 복합체를 제조하였다. Natural Graphite powder (N.G)에 $H_2O_4$ (98%) 및 $(NH_4)_2SO_4$를 적정 몰비로 첨가하여 반응 시킨 후 공기 중에서 열처리 공정을 수행하여 expanded graphite (E.G)를 제조 하였다. 열처리된 E.G를 $1,050^{\circ}C$ 온도에서 15~30초 및 30~60초 동안 공기 중에서 열처리 하여 expanded graphite oxide (E.G.O)를 제조하였으며, E.G.O와 $Co(acac)_3$의 화학적 반응을 통하여 Co 자성나노입자-G.O 복합체를 제조하였다. N.G, E.G, E.G.O 및 E.G.O+Co입자의 결정구조 분석을 위하여 XRD 측정을 수행하였으며, FTIR을 이용하여 각 단계에서의 반응성에 대한 연구를 수행하였다. 각 단계에서 표면 및 내부 미세구조 특성 분석을 위하여 SEM, TEM, 및 EDX 분석을 수행하였으며, E.G.O+Co 복합체의 자기적 특성 평가를 위하여VSM (vibrating sample magnetometer) 측정을 수행하였다. 이러한 연구 결과는 향후 자성나노입자와 그라핀과의 복합화를 위한 기저 기술로 활용가능하리라 판단된다.

• 폴리머
• /
• 제37권5호
• /
• pp.638-641
• /
• 2013

유연 열전소자를 제조하기 위한 열전재료로서, graphite nanosheet(GNS)와 poly(vinylidene fluoride) (PVDF)를 복합화하여 GNS/PVDF 복합체를 제조하였다. GNS의 함량에 따른 전기전도도, 열전도도, 지벡상수를 측정하여 열전성능을 확인하였다. GNS의 함량이 10에서 70 wt%로 증가하면서 전기전도도는 389에서 1512 S/m로 향상되는 결과를 보였다. 복합체의 전기전도도가 크게 증가하는 반면에 지벡 상수는 26.7에서 31.2 ${\mu}V/K$로 큰 변화를 보이지 않았으며, 열전도도 역시 0.24 W/m K를 유지하면서 변화를 보이지 않았다. 고분자와의 복합화를 통하여 GNS 자체의 높은 열전도도를 낮춤으로써 향상된 열전성능을 갖는 열전재료를 제조할 수 있었다.

• 한국전기전자재료학회논문지
• /
• 제36권6호
• /
• pp.588-593
• /
• 2023

The advantage of OTFT technology is that large-area circuits can be manufactured on flexible substrates using a low-cost solution process such as inkjet printing. Compared to silicon-based inorganic semiconductor processes, the process temperature is lower and the process time is shorter, so it can be widely applied to fields that do not require high electron mobility. Materials that have utility as electrode materials include carbon that can be solution-processed, transparent carbon thin films, and metallic nanoparticles, etc. are being studied. Recently, a technology has been developed to facilitate charge injection by coating the surface of the Al electrode with solution-processable titanium oxide (TiOx), which can greatly improve the performance of OTFT. In order to commercialize OTFT technology, an appropriate method is to use a complementary circuit with excellent reliability and stability. For this, insulators and channel semiconductors using organic materials must have stability in the air. In this study, carbon-doped Mo (MoC) thin films were fabricated with different graphite target power densities via unbalanced magnetron sputtering (UBM). The influence of graphite target power density on the structural, surface area, physical, and electrical properties of MoC films was investigated. MoC thin films deposited by the unbalanced magnetron sputtering method exhibited a smooth and uniform surface. However, as the graphite target power density increased, the rms surface roughness of the MoC film increased, and the hardness and elastic modulus of the MoC thin film increased. Additionally, as the graphite target power density increased, the resistivity value of the MoC film increased. In the performance of an organic thin film transistor using a MoC gate electrode, the carrier mobility, threshold voltage, and drain current on/off ratio (I_on/I_off) showed 0.15 cm²/V·s, -5.6 V, and 7.5×10⁴, respectively.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2012년도 제42회 동계 정기 학술대회 초록집
• /
• pp.579-579
• /
• 2012

Graphene has recently been a subject of much interest as a potential platform for future nanodevices such as flexible thin-film transistors, touch panels, and solar cells. And chemical vapor deposition (CVD) and related surface segregation techniques are a potentially scalable approach to synthesizing graphite films on a variety of metal substrates. The structural properties of such films have been studied by a number of methods, including Raman scattering, x-ray photoelectron spectroscopy (XPS), atomic force microscopy (AFM), and transmission electron microscopy (TEM). An understanding of the structural quality and thickness of the graphite films is of paramount importance both in improving growth procedures and understanding the resulting films' electronic properties. In this study, we synthesized the few-layered grapheneunder optimized condition to figure out the growth mechanism seen in CVD-grown graphenee by using various electron microscope. Especially, we observed directly film thickness, quality, nucleation site, and uniformity of grpahene by using AEM. The details will be discussed in my presentation.