• The Journal of the Korea Contents Association
• /
• v.11 no.4
• /
• pp.57-66
• /
• 2011

At this time, digital cameras are used in art and forensic science. However, the digital camera has some limitations which need to understand of photograph and lighting. It is a useful paper to make an infrared flatbed scanner. The following processes offer an infrared flatbed scanner development. First, the infrared flatbed scanner changes visible fluorescent lamp to infrared LED. Second, it equips a long-pass filter, which is available to pass over 810nm wavelength, on the glass to complete the optimal infrared flatbed scanner. In addition, it must copy from digital camera to computer directly. The infrared digital camera has disadvantage to always irradiate infrared lamp. Because of difference between visible length and infrared length characteristic, they have different focal distance. This devised scanner for solving mentioned problems does not need to irradiate infrared lamp, and there is not a problem about focal point because the depth of field of flatbed scanner is minimum 2mm. Lastly, the infrared flatbed scanner can make high resolution which is 12,800dpi unlike digital camera. Accordingly, the infrared scanner looks forward to be used in many field of study.

• Proceedings of the KIPE Conference
• /
• 2007.11a
• /
• pp.157-159
• /
• 2007

본 연구는 인코더를 사용한 Flatbed scanner DC 서보 모터시스템의 저속 제어기 설계 기법을 제안한다. 실제 구동되는 저속에서 DC 모터 시스템을 MSR 알고리즘으로 모델링하여 파라미터의 변동과 부하 외란을 추정하고, 속도 제어주기마다 위치 추종명령을 계산하여 실제 위치에 대한 에러를 보상하도록 설계함으로써 저속에서의 속도 추종능력을 향상시킨다.

• Journal of the Korean Graphic Arts Communication Society
• /
• v.20 no.1
• /
• pp.79-90
• /
• 2002

Recently, the research about color matching for the input/output devices of printing process is progressing rapidly by the digitization. The calibration method of flatbed scanner widely used as an input device for prepress process is especially important for color proofing of high quality color prints. In this paper, scanner calibration method using 3-dimensional look-up table and tetrahedral interpolation was examined and analysed comparatively on the three kinds of original copies, such as photograph, dye sublimation proof and ink jet print for IT8.T/2 target.

• Journal of the Korean Wood Science and Technology
• /
• v.43 no.1
• /
• pp.43-51
• /
• 2015

Wood shrinkage, an important study subject with regard to the use of wood, has long been studied by researchers. However, when the size of a wood specimen is measured, distortion must be taken into account, which can be accomplished by applying external force on the wood specimen. However, when measuring a large number of specimens, this technique can be a lengthy process. If the size is measured and the shrinkage is calculated from images acquired with a flatbed scanner, it is possible to reduce the error in the measurement and to shorten the measurement time because the images of many specimens can be acquired with one scan. To clearly establish the boundary between a wood specimen and the background in a scan, an image threshold method was applied here. The size of a wood specimen measured by means of a scanner image was found to be longer than the value determined with a vernier caliper. The maximum pixel size of a scan image for highly accurate shrinkage calculations compared with the use of a vernier caliper was 0.053 mm/pixel.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.18 no.1
• /
• pp.59-66
• /
• 2000

This study describes the precise DTM by image processing method through scanning the positive film of aerial photo using scanner instead of plotter. First, scanned the positive film of aerial photo by drum scanner and flatbed scanner in different resolution, and then compared the height from image processing method using auto correlation method with height which is taken using $50^m{\times}50^m$ grid in 1 :5,000 geographical map. It shows that heights from aerial photo image of high resolution obtained from scanner are comparable to the heights from 1：5,000 geographical map.

• Computers and Concrete
• /
• v.5 no.2
• /
• pp.101-116
• /
• 2008

The microscopic determination of air void characteristics in hardened concrete, defined in EN 480-11 as the linear-traverse method, is an extremely time-consuming and tedious task. Over past decades, several researchers have proposed relatively expensive mechanical automated systems which could replace the human operator in this procedure. Recently, the appearance of new high-resolution flatbed scanners has made it possible for the procedure to be automated in a fully-computerized and thus cost-effective way. The results of our work indicate the high sensitivity of such image analysis automated systems firstly to the quality of sample surface preparation, secondly to the selection of the air void threshold value, and finally to the selection of the probe system. However, it can be concluded that in case of careful validation and the use of the approach which is proposed in the paper, such automated systems can give very good estimate of the air void system parameters, defined in EN 480-11. The amount of time saved by using such a procedure is immense, and there is also the possibility of using alternative stereological methods to assess other, perhaps also important, characteristics of air void system in hardened concrete.

• BMB Reports
• /
• v.38 no.4
• /
• pp.399-406
• /
• 2005

A sensitive method for detection of Hepatitis A virus (HAV) by utilizing gold-DNA probe on an array was developed. Amino- modified oligodeoxynucleotides at the 5' position were arrayed on an activated glass surface to function as capture probes. Sandwich hybridization occurred among capture probes, the HAV amplicon, and gold nanoparticle-supported oligonucleotide probes. After a silver enhancement step, signals were detected by a standard flatbed scanner or just by naked eyes. As little as 100 fM of HAV amplicon could be detected on the array. Therefore, the array technology is an alternative to be applied in detection of HAV due to its low-cost and high-sensitivity.

• Journal of the Korean Graphic Arts Communication Society
• /
• v.20 no.2
• /
• pp.85-93
• /
• 2002

Recently, the flatbed scanner is widely used to input color original copy in printing industry. In the process of RGB-to-CMY transformation for the scanned colors using the look-up table(LUT) based on the color gamut of the actual output device, however, the problem that some colors in the original out of the gamut cannot be printed, may occur. In this study, another color transformation method applicable to any kind of originals using the new LUT with extended gamut based on the ideal output device, was examined and proposed.

• Journal of Korean Academy of Oral and Maxillofacial Radiology
• /
• v.26 no.2
• /
• pp.191-200
• /
• 1996

This study was performed to determine the adequate resolution and compression method in teleradiology. A digital imaging system using Machintosh IT ci computer, 15' Sony high resolution RGB monitor, Umax Power look flatbed scanner with transparency unit and 12 panoramic radiographs were used. The results were as follows : 1. Relative detectability at the group scanned by 30ddpi, 600dpi and 1200dpi was same as those at the real panoramic radiographs. 2. Perceivable image quality degradation was found at the 25％ of middle quality of JPEG compression. But those were not diagnostically significant. 3. Perceivable image quality degradation was found at the 100％ of low quality of JPEG compression. And 8cases among them were diagnostically significant. On the basis of the above results, it is considered that the adequate resolution in scanning radiographs for teleradiology is 300dpi and compression method is the middle quality of JPEG compression.

• Korean Journal of Applied Biomechanics
• /
• v.19 no.2
• /
• pp.187-196
• /
• 2009

The foot type is classified into normal, high or low arch according to either foot print or medial longitudinal arch (MLA) height. Plantar fasciitis, heel pain, Achilles tendinitis, stress fracture, metatarsalgia, knee pain, shin splint pain, and etc are common foot disorders and associate to the foot type. The purpose of this study was to evaluate several suggested bony inclination used to classified the abnormal foot and if the arch index (AI) was correlated with foot morphology. Lateral view and dorso-plantar view of radiographic images and flatbed scanner measurements obtained from 57 college students were analyzed. Results showed that AI measured in this study was higher than Caucasian Americans and European, but similar with African. The ethnic origin could influent the AI distribution. The AI provided a simple quantitative means of assessing the structure of lateral and medial longitudinal arches. The correlation coefficients of true bone height with AI could be further improved by normalized foot width rather than foot length. AI also demonstrated as a good indicator of inclination between calcaneus-fifth metatarsal (CalM5) and calcaneus-first metatarsal (CalX), it is a good means to classify the foot type.