• Korean Journal of Materials Research
• /
• v.31 no.11
• /
• pp.642-648
• /
• 2021

The precipitation effect of Al-6%Si-0.4%Mg-0.9%Cu-(Ti) alloy (in wt.%) after various heat treatments was studied using a laser flash device (LFA) and differential scanning calorimetry (DSC). Solid solution treatment was performed at 535 ℃ for 6 h, followed by water cooling, and samples were artificially aged in air at 180 ℃ and 220 ℃ for 5 h. The titanium-free alloy Al-6%Si-0.4%Mg-0.9%Cu showed higher thermal diffusivity than did the Al-6%Si-0.4%Mg-0.9%Cu-0.2%Ti alloy over the entire temperature range. In the temperature ranges below 200 ℃ and above 300 ℃, the value of thermal diffusivity decreased with increasing temperature. As the sample temperature increased between 200 ℃ and 400 ℃, phase precipitation occurred. From the results of DSC analysis, the temperature dependence of the change in thermal diffusivity in the temperature range between 200 ℃ and 400 ℃ was strongly influenced by the precipitation of θ'-Al₂Cu, β'-Mg₂Si, and Si phases. The most important factor in the temperature dependence of thermal diffusivity was Si precipitation.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.10 no.6
• /
• pp.2463-2482
• /
• 2016

Cloud services are often provisioned to their customers using user-friendly web browsers with flexible and rich plug-in environments. Delay is one of the fundamental performance metrics of these web-based services. Commonly-used network measurement tools usually only measure network delay and it may be difficult to infer the web-delay performance using only network layer measurement approaches. In this paper, we propose to evaluate the application layer delay in a browser-based network measurement platform using engineered scripts. We conducted a delay measurement study using instrumented scripts in the proposed browser-based measurement platform. Our investigation included a comparison study of three browser-scripting delay measurement methods, including Java applet, JSP and Flash ActionScript. We developed a browser-based delay measurement testbed over the Internet so that different delay measurement tools could be evaluated in the same real network environment including typical Internet paths and the Baidu cloud. We also decomposed the components of the end-to-end delay process of the above measurements to reveal the difference and relationship between the network-layer delay and the application-layer delay. Our measurement results characterize the stochastic properties of the application-layer delay over real Internet paths, and how these properties vary from the underlying network layer delay. This browser-scripting measurement approach can be easily deployed on different cloud service platforms to inspect their application-layer delay performance between end clients and the cloud platforms. Our measurement results may provide insights into designing new cloud services with enhanced quality-of-experience perceived by cloud users.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.34 no.6 s.119
• /
• pp.39-53
• /
• 2007

Unlike conventional roof landscaping, where various kinds of plants and structures are employed, a grass roof is a roof on which herbaceous plants are grown in planting medium and which is not accessed or maintained, mainly because it doesn't have sufficient load capacity to support a regular roof garden. They are mostly built on existing roofs, whether flat slab or gabled. Planting on roofs has numerous advantages, such as creating a biotope, purifying urban air, adding moisture to the atmosphere, storing rain water, preventing flash floods, reducing energy use for heating and air conditioning, enhancing the urban landscape and providing relaxation to the city dwellers, not to mention the alleviation of global warming by absorbing $CO_2$. In addition to the general merits of roof planting, the grass roof has its own unique qualities. Only herbaceous species are planted on the roof, resulting in light weight which allows roofs of existing buildings to be planted without structural reinforcement. The species chosen are mostly short, tough perennials that don't need to be maintained. These conditions provide an ideal situation where massive planting can be done in urban areas where roofs are often the only and definitely the largest space available to be planted. If roofs are planted on a massive scale they can play a significant role in alleviating global warming, heat island effects and energy shortages. Despite the advantages of grass roofs, there are some problems. The most significant problem is the invasion of neighboring plants. They may be brought in with the planting medium, by birds or by wind. These plants have little aesthetic value comparing to the chosen species and are usually taller. Eventually they dominate and prevail over the original species. The intended planting design disappears and the roof comes to look wild. Since the primary value of a grass roof is ecological, a change in attitude towards what constitutes beauty on the roofscape is necessary. Instead of keeping the roof neat through constant maintenance, people must learn that the wild grass with bird's nests on their roof is more beautiful as it is.

• Atmosphere
• /
• v.26 no.2
• /
• pp.321-336
• /
• 2016

Damages caused by torrential rain occur every year in Korea and summer time convection can cause strong thunderstorms to develop which bring dangerous weather such as torrential rain, gusts, and flash flooding. On 6 August 2013 a sudden torrential rain concentrated over the inland of Southern Korean Peninsula occurred. This was an event characterized as a mesoscale multicellular convection. The purpose of this study is to analyze the conditions of the multicellular convection and the synoptic and mesoscale nature of the system development. To this end, dynamical and thermodynamic analyses of surface and upper-level weather charts, satellite images, soundings, reanalysis data and WRF model simulations are performed. At the beginning stage there was a cool, dry air intrusion in the upper-level of the Korean Peninsula, and a warm humid air flow from the southwest in the lower-level creating atmospheric instability. This produced a single cell cumulonimbus cloud in the vicinity of Baengnyeongdo, and due to baroclinic instability, shear and cyclonic vorticity the cloud further developed into a multicellular convection. The cloud system moved southeast towards Seoul metropolitan area accompanied by lightning, heavy precipitation and strong wind gusts. In addition, atmospheric instability due to daytime insolation caused new convective cells to develop in the upstream part of the Sobaek Mountain which merged with existing multicellular convection creating a larger system. This case was unusual because the system was affected little by the upper-level jet stream which is typical in Korea. The development and propagation of the multicellular convection showed strong mesoscale characteristics and was not governed by large synoptic-scale dynamics. In particular, the system moved southeast crossing the Peninsula diagonally from northwest to southeast and did not follow the upper-level westerly pattern. The analysis result shows that the movement of the system can be determined by the vertical wind shear.

• Journal of Advanced Marine Engineering and Technology
• /
• v.38 no.1
• /
• pp.48-55
• /
• 2014

These Xenon flashlamp power supply for Ultra Violet has converter with high voltage conversion ratio. General model is composed of transformer with high voltage conversion ratio and voltage doubler rectifier circuit. Purpose of power supply leads dielectric breakdown of Xenon flashlamp and passes current rapidly. When passing current, it has to limit current to avoid over-heat, damage of electrode and acceleration of gas oxidation which are cause of performance degradation of lamps. Generally, inductors and resistors, which are called as "Ballast," are used to limit currents. Generally, Transformer has high turn ratio to make high voltages. But we can get high voltages using the transformer with low turn ratio which is driven with self resonance. Also, an advantage of self resonance is to make a circuit simply through impedance of transformer in resonance frequency which filters output voltage. As using an unique impedance of transformer, the circuit does not need other impedance elements like the ballast. So the power supply assures high efficiency of the arc discharge.

• Journal of Korea Multimedia Society
• /
• v.16 no.11
• /
• pp.1239-1249
• /
• 2013

According to development of weather radar, researches about observation, analysis or forecast of weather phenomena such as tornado, flash-flood etc. were encouraged by reducing frequency interferences, transmission noises, attenuations of radar signal. In contrast, there is a growing interest in the visualization and expression methods for weather radar data but weather radar manufacturers or the organs of government for weather are just busy interpreting expressed weather images projected on GIS. We propose an effective high definition weather radar information visualization method able to apply various GIS platforms to observe and take actions against rapid local weather changes effectively. In this paper, first we change information acquired from weather radar to raster or vector type high definition data structures using specific algorithms. And then, we quadrate our processed raster/vector type weather data with various GIS platforms accurately to make observers can recognize and check weather situations over exact geographical positions and elevations intuitively. Experimental results verify that our method make observers can recognize and analyze weather changes, tornados, local downpours or flash floods accurately by analyzing high definition weather radar data combined with GIS platform including detailed target locations and elevations.

• Archives of design research
• /
• v.17 no.4
• /
• pp.69-78
• /
• 2004

This thesis is designed to investigate the relationship of Web Multimedia design. Web sites are needed to approach the lot of ways that increase the user intuitive lay over communicating information nowadays. In the digital era of today, multimedia is composed of such various elements as text, image, sound, animation, video. The method of the thesis is a research questions as this follow. First, the structuring element of the web site type was classified by a form and the contents in the web site. These types in this classified web site are HTML, flash and mixed type. Second, to study this thesis, we made up pose a questionnaire to students in the university as th method of random sampling. The goal of this survey is that user is how to understand about the web multimedia design. Results of analysis may be summarized as follows: 1) It was the image design in the NIKE web site that there would be evaluated the best design effected by flash, and it is finding that the NIDE web site will need more supporting Information, Interactive design through this studies. 2) It was information that there would be evaluated good design effect by text and image in SAMSUNG web site. Based on HTML, SAMSUNG need supporting motion image design by this studies. In conclusion, this thesis suggests that the each web medias should be constructed by the different web design component, according to information, Interactive, image design of web site.

• The Journal of Small Business Innovation
• /
• v.20 no.2
• /
• pp.17-34
• /
• 2017

This study examines the role of family involvement and national culture in entrepreneurs' choice of mode of entry into entrepreneurship. Mode of entry consists of two choices: starting a new venture or taking over an existing firm. Specifically, we investigate how cultural values moderate the relationship between family involvement and their choice of business takeover. Using a cross-national sample of 3,831 respondents from 33 countries in Flash Eurobarometer data, we develop key variables and test our hypotheses employing hierarchical linear modelling. Our results show that the relationship between family involvement of entrepreneurs and their choice of business takeover is moderated by individualism, short term orientation, and power distance. This research contributes to understanding comparative international entrepreneurship based on national culture. Implications for policy makers and educators are discussed.

• Journal of The Geomorphological Association of Korea
• /
• v.20 no.4
• /
• pp.51-70
• /
• 2013

The characteristics of deposits formed by the Daejon-cheon and Soobuk-cheon, dissecting the mountains such as Byungpung Mt. and Samin Mt. in western part of Damyang county, Jeonmam province. Results from field survey and bore hole logging by KIGAM are used in interpreting depositional environment, in this study. By the result of deposits near of the channels Daejon-cheon and Soobuk-cheon, and main channel of Youngsan River, the depth of sediment layers in this area is 4~7m, far thinner than formerly estimated. Weathered material of local rocks forms the base of the sedimentary layers. It can be assumed that the location channel of the Youngsan river has been stable ever since the start of the sedimentary events. Sediment particles of tributaries are angular than those of Youngsan River. Particles are larger and sorting is poor. It is interpreted as mount flash flood deposits. Main sources of sediments at the valley bottom or deposition dominated area are the terrace deposits or slope deposits over the gentle foot-slope or front of surrounding mountains. Some particles show polygonal cracking on the surface originated from the strong chemical weathering, while most of these has high angularity. It means various geomorphic processes operate to produce and transport the particles in this area.Isolated hills within the sedimentary plains are made with weathered materials of local bedrock. In the case of foot-slope of the hills, thin sedimentary layers are found. So it can be concluded that surface features of deposition zone of the Daejon-cheon and Soobuk-cheon is formed by the filling of lower part of the valley and its feature partly controlled by the relief of the weathering front.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.13 no.4
• /
• pp.63-70
• /
• 2003

In the modern electronic world, the authentication of a person is an important task in many areas of online-transactions. Using biometrics to authenticate a person's identity has several advantages over the present practices of Personal Identification Numbers(PINs) and passwords. To gain maximum security in the verification system using biometrics, the computation of the verification as well as the store of the biometric pattern has to be taken place in the security token(smart card, USB token). However, there is an open issue of integrating biometrics into the security token because of its limited resources(memory space, processing power). In this paper, we describe our implementation of the USB security token system having 206MHz StrongARM CPU, 16MBytes flash memory, and 1MBytes RAM. Also, we evaluate the performance of a light-weighted In-gerprint verification algorithm that can be executed in the restricted environments. Based on experimental results, we confirmed that the RAM requirement of the proposed algorithm was about 6.8 KBytes and the Equal Error Rate(EER) was 1.7%.